Msonic MV505A Instruction Manual

2

9

Instruction Manual

Instrukcja obsługi

MV505A

Digital camera for car

Cyfrowa kamera samochodowa

1

Vakomtek S.A.

Vakomtek S.A.

Vakomtek S.A.

Vakomtek S.A.

Introducon of the vehicle-mounted

camera

’

s

funcon:

1. USB interface

2. TV interface

3. SD card connector

4. Loudspeaker

5. Holder hole

6. Microphone

7. Baery cover

8. Camera lens

9. Infrared LED

10.On-off key / charging indicator

11.Video / photograph key

12.2.4-inch colour screen

13.MENU

14.DOWN

15.UP

16.Mode switching key

Accessories:

1. Manual 2. Holder 3. USB cable

4. Car charger (a converter changing output voltage from 24 /

12V to 5V)

2

ENG

System Sengs

3

ENG

Before you begin using the camera, you must set a few basic sengs, such as
the date and me, language, auto power off, system reset, etc.
Aer turning on the camera, press the MENU buon to enter the Sengs menu.
Press the MENU buon again to enter the System Sengs menu.

1. Format

Use this funcon to format the current storage media; doing so will delete any

data on the storage media.

Enter the System Sengs menu screen, then use the UP or DOWN keys to select
“Format”, and press the buon. Then press UP or DOWN again to select
“Execute” and press the buon to begin formang. Aer formang is
complete, press the MENU buon to exit the menu.

2. Sounds

Aer turning on the camera and entering the Sengs screen, use the UP or

DOWN keys to select “Sounds.”

Press the buon to enter the opons screen and use the UP or DOWN keys to
select on or off, and press the buon to confirm; press the MENU buon to
exit the menu. When sounds are turned on, pressing buons will produce a

tone.

3. Language Sengs

Aer turning on the camera and entering the Sengs screen, use the UP or

DOWN keys to select “Languages.”

Press the buon to enter the opons screen and use the UP or DOWN keys to

select one of the following languages: English, French, German, Italian, Spanish,

Portuguese, Tradional Chinese, Simplified Chinese, Japanese, Korean, or
Russian. Aer selecng a language, press the buon to confirm; press MENU

to exit the menu.

4. Auto power off

Aer turning on the camera and entering the Sengs screen, use the UP or
DOWN keys to select “Auto power off.” Press the buon to enter the Auto
power off screen, then press UP or DOWN to choose either 1-minute, 3-minute,
5-minute, or Off. Aer selecng one of these four opons, press the buon to
confirm; press the MENU key to exit the menu.

5. System reset

Use this funcon to reset all sengs to their default values.
In the System Sengs menu screen, use the UP or DOWN keys to select “System
reset” and press the buon. Then select “Execute” and press the key to
confirm; press MENU to exit the menu.

Video Mode

Shoong mode

4

ENG

6. Opcal frequency

Using the opcal frequency opons, you can set the system frequency most

appropriate for the local light source.

In the System Sengs menu screen, use the UP or DOWN keys to select “Opcal
frequency” and press the buon. Then select 60Hz or 50Hz and press the
key to confirm; press MENU to exit the menu.

7. Video output format

In the System Sengs menu screen, use the UP or DOWN keys to select “Video
output format” and press the buon. Then select NTSC or PAL and press the
key to confirm; press MENU to exit the menu.

8. Seng the me and date

In the System Sengs menu screen, use the UP or DOWN keys to select “Enter
Date” and press the buon. Then select me or date sengs and press the
key. In that screen, press the buon to select which place you need to adjust,
and use the UP or DOWN keys to change the value. Aer you are finished
adjusng all values, hold down the buon to exit the me and date sengs;

then press MENU to exit the menu.

9. USB

This menu allows you to select whether, when the camera is connected to a

computer, it will funcon as a disk drive or as a PC camera (oponal).
In the System Sengs menu screen, use the UP or DOWN keys to select “USB”
and press the MENU buon. Then select “PC Camera” or “Disk Drive” and press
MENU to confirm.

10. Screen saver

In the menu, find this opon and press the Enter key to enter. Opons are:
Normal 1-minute, or 3-minute. Use the UP or DOWN keys to make a selecon,

then press the Enter key again.

Make sure that an SD card has been inserted into the product!

Press the power buon to turn on the camera, and enter camera mode. Press
the buon once to begin recording, and press the buon again to stop

recording and save.

Use the UP or DOWN keys for digital zoom;
Note: When recording, segments are saved automacally every 5 minutes.

Aer turning on the camera in video mode, press the MODE buon once to
switch to shoong mode to take sll pictures.
Press the buon to start shoong and saving pictures.

5

ENG

Press UP or DOWN for digital zoom.

4. Preview/Playback mode

In shoong mode, press the MODE buon to enter preview/playback mode:

The UP and DOWN keys: When in standby they will go to the previous or next

file; during playback, they will fast forward or rewind.
The MENU key: When in standby it will enter the preview/playback menu;

during playback, it will select the fast forward or rewind speed.

The key: If the current file is a video file, it will start playback. Pressing it again

will pause or play.

Shoong menu

In shoong mode, press the MENU buon to enter the shoong menu

5.1 Photo Resoluon

Use this opon to set the size of the captured image; larger images contain more
detail, but require greater storage space.
In the shoong menu, use the UP or DOWN keys to select “Size” and press the
buon to enter the submenu. Then use UP or DOWN to select 12M, 8M, 5M,
3M, 2M, 1.3M, or VGA, and press the key to confirm; press MENU to exit the

menu.

5.2 Photo Quality

This opon sets the quality of the captured image; the beer the image quality,
the greater the storage space required.
In the shoong menu, use the UP or DOWN keys to select “Quality” and press
the buon to enter the submenu. Then use UP or DOWN to select
high-quality, standard, or economy, and press the key to confirm; press

MENU to exit the menu.

5.3 Scene modes

Choose a different scene mode for different environments in order to opmize

image results.

In the shoong menu, use the UP or DOWN keys to select “Scene mode” and
press the buon to enter the submenu. Then use UP or DOWN to select Auto,
Sport, Night, Portrait, Landscape, or Backlit, and press the key to confirm;

press MENU to exit the menu.

5.4 Exposure Compensaon (Brightness)

Select a different exposure value (EV) according to the lighng condions.
In the shoong menu, use the UP or DOWN keys to select “EV” and press the
buon to enter the submenu. Then use UP or DOWN to select different
exposure values, and press the key to confirm; press MENU to exit the menu.

5.5 White balance