Half and Full Bridge Motor Drives
Audio Power Amplifiers
Headphones
Cellular Phones, PCMCIA, PDA
Ideal for Single Supply Systems
5V - Peripheral
12V - Automotive
28V - Avionic
4707 Dey Road Liverpool, N.Y. 13088 (315) 701-6751
FEATURES:
ISO-9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
Extremely Compact Surface Mount Package
Low Cost Dual High Power Amplifier
Wide Supply Voltage Range: 5V to 40V
High Output Current: 2A
High Efficiency: |Vs-2.2V| at 2A
Internal Current Limit
Wide Common Mode Range
(Includes Negative Supply Voltage)
Low Distortion
EQUIVALENT SCHEMATIC
The MSK 173 is a high power dual operational amplifier. Each amplifier is capable of delivering two amps of
current to the load. The MSK 173 is an excellent low cost alternative for bridge mode configurations since both
amplifiers are packaged together and will track thermally. The wide common mode range includes the negative rail,
facilitating single supply applications. It is possible to have a "ground based" input driving a single supply amplifier
with ground acting as the second or "bottom" supply of the amplifier. The output stage is current limit protected to
approximately 4.0 amps. The MSK 173 is packaged in an extremely space efficient 10 pin power SOIC package. The
MSK 173-1 is packaged in a 10 pin flatpack. Consult the factory for other packaging options if desired.
DESCRIPTION:
1
All power pins must be
electrically connected
for proper operation.
PIN-OUT INFORMATION
1
2
3
4
5
-Input 1
+Input 1
-Vcc
+Input 2
-Input 2
+Vcc
Output 1
+Vcc
Output 2
+Vcc
Rev. H 8/00
The heat sink of the package and the lid are electrically
connected to -Vcc. The heat sink tab must be connected
to the system -Vcc.
HEAT SINK
10
9
8
7
6
TYPICAL APPLICATIONS
173/173-1
HIGH POWER DUAL
OPERATIONAL AMPLIFIER
MSK173
MSK173-1
MIL-PRF-38534