MSI RX800XT CrossFire, RX850XT CrossFire, RX850 CorssFire, RX800 CorssFire Install Manual
Hardware Installation
Follow the steps to install the VGA card :
1. Remove the computer case.
2. Locate the PCI Express slot on your
mainboard.
Warning: Inserting the VGA card into a wrong
slot (e.g. AGP slot) may damage your card
(refer to your mainboard manual for more
Information).
3. Put the card directly over the slot
press one end of the card into the slot
first. Gently but firmly press the other end
until it is fully seated in the slot.
4. Follow the steps listed above to insert another
VGA card, and then secure both cards with
bracket screws.
5. Using the supplied CrossFire cable to connect
the DMS connector of
DVI connector of
. Install all other cards and devices and connect
all necessary cables, and then install the case.
7. Connect the monitor. Now, you are ready to
install the software on your computer.
below
(Refer to Figure 1)
PCI Express
and
(Refer to Figure 1)
(Refer to Figure 1)
CrossFire Edition card
to the Standard RADEON
card. (Refer to Figure 2)
6
Software Installation
(for )
Windows XP
R
I
TM TM
nstalling MSI Live Update 3
To install the driver of the VGA card to your computer running CDWindows XP, please
follow the steps below:
1. Turn on the computer.
2. Insert the into the CD-ROM drive. The Autorun program will start the Setup
program, and show the setup screen as follows:
R
TM
MSI Live Update 3 is a useful utility for you to upgrade your MSI mainboard and
VGA card. Thanks to the powerful capacity of this utility, you can conveniently
download and automatically update the BIOS and the drivers on-line, without spending
much time in searching many Web sites to find the BIOS or drivers you want.
Installing from the CD-Title
1. Insert the CD into the CD-ROM drive, and start the Setup program.
2. Click the Utility tab on the setup screen.
3. Click the MSI Live Update 3 . Follow the on-screen instructions to complete the
installation.
Installing from the MSI Web Site
1. Make connection to MSI's website at http://www.msi.com.tw
2. Select /Support/Live Update 3/ on the upper part of the MSI's homepage to enter
the setup page.
TM TM
TM TM
TM
Tip : If, on your computer, the
Autorun program does not execute
automatically, please 1) enable the
CD-ROM drive Auto-detect function
from Control Panel; or 2) find and
run the setup.exe file manually from
the CD.
3. Click ATi VGA Drivers. Follow the on-screen instructions to complete the
installation.
4. After finishing the installation, restart the computer as instructed.
U
TM TM
sing MSI Live VGA Driver Update
MSI Live VGA Driver Update
This service enables you to update the latest VGA driver for your VGA card.
1. To update the MSI Live VGA Driver , click Live VGA Driver item on the left
column of the main page.
TM TM
TM TM TM
2. This utility will start checking your platform and the information on the VGA card, and
display the information in a list.
3. Click the graph button on the bottom to connect MSI Live Update Series Server.
Then, it will automatically connect the Internet and compare the version of the driver
in the database.
4. It may take several minutes to detect the required drivers. Please wait while
proceeding detection.
5. Click the InstallShield Wizard button on the right side of the table to download and
update the driver. All actions will proceed automatically.
6. Follow the on-screen instructions to complete the updating procedure.
The page of the MSI Live Update 3
TM TM
3. TMClick the InstallShield Wizard button to have the program of MSI Live
TM TM
Update 3 with MSI Live monitor downloaded and installed on your system
automatically, or click here (manual) to download and install the program manually.
4. Follow the on-screen instructions to complete the installation.
640x480 200Hz
800x600 200Hz
1024x768 200Hz
1152x864 200Hz
1280x1024 160Hz
1600x1200 120Hz
1920x1080 120Hz
1920x1200 100Hz
1920x1440 90Hz
2048x1536 85Hz
*
*
*
*
*
Seamless integration of pixel shaders with video in real time
FULLSTREAM video de-blocking technology for Real, DivX, and WMV9 formats
VIDEOSOAP noise removal filtering for captured video
MPEG1/2/4 decode and encode acceleration
Adaptive Per-Pixel De-Interlacing and Frame Rate Conversion (temporal filtering)
* Innovative 0.11 micron process technology
TM
TM
2D Display Modes: Resolutions, colors and maximum refresh rates(Hz) for 256, 65K or 16.7M
colors
CrossFire Edition card
Figure 2
DMS Connector
DVI Output
Figure 1
Standard RADEON card
DVI Connector
CorssFire
Cable
Getting Started
System Requirements
Card Features
Please check out the following items to make sure that you get the complete product:
VGA card
CDs
- Drivers and documentation on CD
- Applications on CD
Consult your dealer immediately if anything is missing or damaged.
U
TM TM
sing MSI Live VGA BIOS Update
I
n
t
e
r
a
r
t
n
a
S
-
t
i
o
o
r
n
c
i
a
l
M
TEL. 886-2-32345599
FAX. 886-2-32345488
http://www.msi.com.tw
G52-VV803X2
July 2005
MSI Live VGA BIOS Update
This service enables you to update the latest VGA BIOS for your VGA card.
1. To update your VGA BIOS, click Live VGA BIOS item on the left column of the main page.
TM TM
TM
TM
2. If your VGA card does not support the Live VGA BIOS function, you will receive a warning
message on the screen.
TM
3. If your VGA card do support the Live VGA BIOS function, please pay attention to the message
shown on the screen telling you that in what circumstance flashing BIOS may fail to reboot.
4. Click Yes if you would like to try it at your own risk or No to return to the main page with
everything unchanged.
5. If you click Yes to continue, it will check the information and BIOS version of your VGA card,
and list them in a table.
TM TM
6. Click the graph button at the bottom to connect the MSI Live Update 3 Server.
TM TM
7. The MSI Live VGA BIOS will automatically connect the Internet and search the supported
TM
BIOS in the database of MSI .
8. If it has found one (or several) supported BIOS for your VGA card, click the InstallShield
Wizard button on the right side of the table to have the new BIOS downloaded and updated
automatically.
9. Follow the on-screen instructions to complete the updating procedure.
* All trademarks used in this manual are the sole property of their respective owners.
VGA is a trademark of International Business Machines Corporation.
Pentium is a registered trademark of Intel Corporation.
Windows is a registered trademark of Microsoft Corporation.
R R
R R
FEATURES
*
* DirectX 9.0 Vertex Shaders
- Vertex programs up to 65,280 instructions with flow control
- Single cycle trigonometric operations (SIN & COS)
*
-
-
-
-
-
*
*
*
*
*
*
Support for Microsoft DirectX 9.0 programmable vertex and pixel shaders in hardware
DirectX Extended 9.0 Pixel Shaders
Up to 1,536 instructions and 16 textures per rendering pass
32 temporary and constant registers
Facing register for two-sided lighting
128-bit, 64-bit & 32-bit per pixel floating point color formats
Multiple Render Target (MRT) support
Complete feature set also supported in OpenGL via extensions
* 2x/4x/6x Anti-Aliasing modes & 2x/4x/8x/16x Anisotropic Filtering modes
High quality 4:1 Normal Map Compression
Works with any two-channel data format
3-level Hierarchical Z-Buffer with Eany Z Test
Lossless Z-Buffer Compression (up to 48:1)
Fast Z-Buffer Clear and Z Cache optimized for real-time shadow rendering
* Optimized for performance at high display resolutions, including widescreen HDTV
resolutions
R R
R
To install the VGA card, your computer system needs to meet the following requirements:
Intel Pentium III (and above), AMD K7 (and above), or compatible with PCI Express slot
128MB of system memory
Installation software requires CD-ROM drive
DVD playback requires DVD drive
Interactive Program guide requires Internet connection for listing updates
Remote control receiver requires available USB port
500MHZ minimum processor speed for MPEG-2 video capture
Operation System Support: Windows XP
Power supply of 350 (and up) watt is highly recommended for system stability.
TM
R R R
Macrovision Corporation Product Notice
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other right owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
For reference only
Note: The VGA card shown here
may vary from the actual card.
For further information, please
visit MSI website at
www.msi.com.tw
MICRO-STAR INT'L
MS-V803
MICRO-STAR
INTERNATIONAL
DMS port
ATI Radeon X850 series or
ATI Radeon X800 series
DVI Port
PCI Express interface
256MB DDR3 memory
Power Connector
Fan Connector
RX850 series CorssFire
RX800 series CorssFire
ATI Radeon X850 series inside!!!
ATI Radeon X800 series inside!!!
PCI Express Interface
DMS Integrated!!
Loading...