5.Page 16,17 Modify power supply solution.
a.PWM from SC1102A,SC1541-3.3V,SC1565 share one ISL6529.
b.FBVDDQ is transfered from Q800,U4 by 5V.
c.SC2610 change to HIP6012.
00A-0624
1)Page 16 a.Remove C1250,C1251,R1076,R1071,Q10,U4,Q800.
b.FBVDDQ Remove Q800 and U4 ,Add U812/NIKO-1085S/TO-263.
c.Q905 and Q201 from 45N02LD change to 55N02LD for low Rdson.
2)page 17 Remove Q9,R2086,Q8,R2087.
3)page 11 Add R2217/33ohm and C2495 for "DVOCLK_IN".
4)page 15 change Text Note "PCI_DEVID =253" to "PCI_DEVID =283".
5)page 17 a.R2085 change value to 4.7K.
b.U3 change refernce to U813.
00A-0625
1)Page 16 ADD C1250,C1251,R1076,C1071.
2)page 9 a.ADD RP16/47ohm for "DVOBD12" and "DVOBD13".
b.Add solder side heat sink "K201"
3)page 11 Add SAA7104/5.
CC
00A-0626
1)Page 9 - Change the 47ohm RPack to 33ohm RPack.
2)Page 2 - a.ADD C106/4.7U for "12V to gnd".
b.R80,R81,R82,and R83 from 5% change to 1%.
3)Page 16 - U812 from L1085/3A change to L1084/5A for FBVDDQ.
4)Page 16 - a.Remove C1406.
b.ADD CE1,CE2,CE3,CE4 for EMI (FBVDD bypass).
c.ADD R617/1K,R618/6.8K,C1406/470PF for U814.
5)Page 17 - ADD C2307,C2308 for "FBVDDQ".
00A-0702
1)Page 2 - a.Make R80 = 49.9 ohms 1%, Make R81 =
NO_STUFF, Make R82 = 56.2 ohms 1%, and
Make R83 = NO_STUFF.
b.C110 from 0.1uF change to 0.01uF
C113 from 220PF change to 0.22uF
2)Page 5,6,7,8 - Add C550-C565 / 10PF / 0402 from
"FB(A/B/C/D)CLK(0/0-/1/1-) total 16pcs for
EMI engineer.
00A-0712
1)Need to change Power net on R2088 sheet 17 to "12V".
Need to change Power Net on D658 sheet 17 to "12V".
AA
"ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS,
DIAGNOSTICS, LISTS AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, "MATERIALS") ARE
BEING PROVIDED "AS IS." NVIDIA MAKES NO WARRANTIES, EXPRESSED, IMPLIED,
STATUTORY OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL
IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE."
5
4
00A-0716
1)Page 2 - a.R80 and R81 needs to be tied to "GND". right now it is tied to VDDQ.
b.R82 and R83 needs to be tied to "VDDQ".
Pin 'R82.2' moved to net 'VDDQ'.
Pin 'R83.2' moved to net 'VDDQ'.
Pin 'R81.1' moved to net 'GND'.
2)Page 2 - Pin 'Q901.3' moved to net 'AGP_MDT2'. This is the collector.
Pin 'Q901.1' moved to net 'AGP_MDT4'. This is the BASE.
Pin 'Q901.2' moved to net '3.3V'. This is the Emitter.
3)Page 2 - Component value changes:
a.R98 please change from 5.76K to 6.49K 1%.
b.R110 and R105 change from 1.5K to 2.32K 1%.
c.Q613 - Changed from 2N7002 to IRLML2502 (N-ch 20V 3A 0.08 on resistence).
d.Q901A - change to MMBT4403LT1.
00B-0728
1)Page 2 - C108 pin 1 & Q901A pin "E" and R94 pin 1 from 3.3V change to 3.3VL.
2)Page 16 - C1303 from SMD change to DIP for low ESR.
3)Page 17 - a.Add CE4-CE8 for EMI 3.3V to FBVDDQ.
b.D658 pin2 connector to "CP_CAP",D658 pin 3 connector to C2273 pin 1.
00B-0730
1)Page 2 - Add U200/FDC6301N,R93/0R,R101/121K,R108/121K,R96/1K for AGPVrefcg.
2)Page 16 - R1076 change to 6.49 ohm / 1%.
C1250 change to 68nF.
R1210 change to 13K / 1%.
C1448 change to 47nF.
C1252 change to 2.2nF.
3)Page 17 - R1067 change to 10 ohm / 1%.
C2230 change to 100nF.
R2081 change to 10K / 1%.
C2234 change to 2.7nF.
R2075 change to 1.58K / 1%.
R2084 change to 49.9K / 1%.
00B-0731
1)We need to change the Device ID from 0x283 to 0x281.
So that means R959 is a NO_STUFF and R258 is 10K.
2)Page 17 - R1121 change to 3.16K / 1%.
00B-0801
1)Page 17 - C2234 change to 2.7nF.
2)Page 15 - Add JP2 connector to "DVOD21 and GND.
3)Page 13 - P300 pin 17,18 floating.
00B-0802
1)Page 16 - Add Cap C1264,C2309,C2310(dual layout) for layout.
2)Page 18 - Add R58,R59,R60 and U2 for FAN power.
100-0819
1)Page 16,17 - Remove C1263,C2267,C2301,C2303,C2309,C2310 for layout.
2)Page 16,17 - L801,L802 change Footprint to CHK_3052_08.
3)Page 3 - change R1107 to 113R and change R927 to 110R.
4)Page 10,12 - C325,C320,C1120,C1121 from 22PF change to 47PF.
4
3
3
2
Sub
Assemblies
COMMON
NO_STUFF
PRI_DVI_I
PRI_PROT
SEC_DVI_I
SEC_PROT
AGP3VFBDQ
FBVDD-FBDQ
PLL-SEQ
PWR-SEQ
PWR-SEQ-BPComponents stuffed for Power Sequence By-PASS
NVVDD-2602
FB_2610_SWT
SC1541
SC1565
FB64LO
FB64UP
SER-PROM
PAR-PROM
FAN_HS-LFT
FAN_SNK
VIVO
VIDO-7104
CX-ENC-TVOUT
SOCKET
64MB-4MX16
BRACKET
FBVDD_ADJ
FBVDQ_ADJ
Legend:
--------------------------------TPNC = Test Point - Not Connected
602-10085-0000-A03
140-10085-0000-A03
2
Description
1
Components are stuffed for all SKUs
Components are not stuffed
Components stuffed for Primary VGA
Components stuffed for Primary Protection
Components stuffed for Secondary DVI
Components stuffed for Secondary Protection
Components stuffed for AGP 3.3V to FBVDD
Components stuffed for FBVDDQ 2.5V to FBVDD
Components stuffed for PLL Sequence
Components stuffed for Power Sequence
Components stuffed for NVVDD Power
Components stuffed for FBVDD Power
Components stuffed for 3.3VL Fixed
Components stuffed for SC1565 - 3.3VL Adj.
Components stuffed for FBA_DATA and FBD_DATA
Components stuffed for FBC_DATA and FBD_DATA
Components stuffed for Serial PROM
Components stuffed for Parallel PROM
Components stuffed for Fan / Blower
left of the GPU
Fan Sink Component
Heat Sink ComponentHEAT_SNK
Components stuffed for Video IN/OUT
SAA7104 Video Out
Components stuffed for CX25871 - TV-OUT
Components stuffed for Socket
Components stuffed for Mem-CFG: 64MB (4Mx16) memory
IO Bracket / VGA-DIN-DVI-I
IO Bracket / VGA- -DVI-IBRACKET-VGA
Components stuffed for FBVDDQ PowerFB_2610_LDO
Components to adjust FBVVD out voltage.
Components to adjust FBVVDQ out voltage.
Table of Contents
1. TOP Page
1.b AGP Interface
1.c NV25 .. PLL / DAC / I2C
2.a NV25 Frame Buffer Intf
2.b Frame Buffer 0..31
2.c Frame Buffer 32..63
2.d Frame Buffer 64..95
2.e Frame Buffer 96..127
3.a DVO A/B
3.b CX25871 TV-OUT
3.c DACB I/O, I2CB --PRI
3.d Video IN / OUT (SAA7801-SAA7804)
3.e DVOB External XMIT
3.f EX-XMIT Filter / I2CA
3.g DVI-_ / VGA Connectors / HotPlug
3.h S-Video Connector / Filter / Bracket
4.a NV STRAP // P/S-ROM
5.a Power Sequence / 3.3VL Supp
5.b NVVDD Power Supply
5.c.FBVDDQ Power Supply
5.c.FBVDD Power Supply
NVIDIA Corporation
2701 San Tomas Expressway
Santa Clara, CA 95050, USA
Top Page .. P151
Size
Wednesday, September 11, 2002
CAGE Code
Custom
Scale
DWG NO
1
Rev
P151-A00-X04
Sheet
119
of
5
10%
X5R
20%
20%
R112
12
0R
COMMON
SMD0402
5%
C112
12
.022UF
X7R 10%
SMD0603
COMMON
C102
12
0.1UF
16V X7R
SMD0603
COMMON
3.3V
C107
12
4.7UF
10%
6.3V X5R
SMD0805
COMMON
GNDGND
R111
12
0R
COMMON
SMD0402
5%
Use trace to
short pads
16V
GND
10%
NTP_PMEn
NTP_OVRCNTn
NTP_INTB
NTP_PERR
NTP_SERR
NTP_USBP
NTP_USBM
GND
R100
0R
SMD0603
NO_STUFF
12
12
C24
.022uF
X7R 10%
SMD0402
COMMON
C100
12
4.7UF
6.3V
SMD0805
COMMON
VDDQ
DD
CC
VDDQ
12
R105
2.32K
SMD0603
COMMON
BB
12
12
R110
2.32K
SMD0603
COMMON
GNDGND
3
C108
12
.022UF
16V
X7R 10%
SMD0603
COMMON
2
1
GND
AA
GNDGND
"ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, "MATERIALS") ARE BEING PROVIDED "AS IS." NVIDIA MAKES NO
WARRANTIES, EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE."
2701 San Tomas Expressway
Santa Clara, CA 95050, USA
Size
CAGE Code
Custom
Scale
DWG NO
Rev
P151-A00-X04
Sheet
219
1
of
5
4
3
2
1
DD
3.3VL
12
CC
BB
FBVDDQ
12
Q208-B
3.3VL
12
R200
R1176
2.2K
5%
10K
SMD0402
PLL_SEQ
5%
SMD0402
PLL_SEQ
Q208-C
12
3
Q208
MMBT2222A
1
IC_SOT23_123
PLL_SEQ
2
Route using 12mil trace.
GND
R1178
220R
SMD0402
PLL_SEQ
C1111
12
0.022UF
25V X7R
SMD0603
R1177
0R
SMD0603
NO_STUFF
150-220R_100MHZ
SMD0603
COMMON
L809
12
COMMON
12
2
Q207
Q207-B
MMBT4403
1
5%
IC_SOT23_123
PLL_SEQ
3
PLL_VDD_IN
L710
150-220R_100MHZ
SMD0603
COMMON
10%
20%
3.3VL
GND
20%
12
12
GND
12
L200
150-220R_100MHZ
SMD0603
COMMON
C206
12
0.022UF
25V X7R
SMD0603
COMMON
C1112
150PF
5%
50V NPO
SMD0603
SOCKET
C208
0.022UF
25V X7R
SMD0603
COMMON
20%
DAC_VDD
DAC_VREF
C207
12
150PF
50V NPO
SMD0603
SOCKET
GNDGND
C209
12
150PF
50V NPO
SMD0603
COMMON
5%
C1115
12
0.01UF
50V X7R
SMD0603
COMMON
PLL_VDD
5%
GNDGND
10%
10%
10%
DAC_RSET
C210
12
0.01UF
10%
12
50V X7R
R1107
SMD0603
113R
COMMON
SMD0603
COMMON
DAC2_VDD
DAC2_VREF
DAC2_RSETDAC2_BLUE
12
R927
110R
1%
SMD0603
COMMON
GND
GND
1%
GND
R1116
0R
SMD0603
COMMON
R1115
0R
SMD0603
SOCKET
12
C1114
0.01UF
50V X7R
SMD0603
COMMON
12
5%
12
C205
0.01UF
COMMON
SMD0603
DAC_COMP
IDUMPA
12
5%
10%
DAC2_COMP
U100F
AN11
DACVDD
AK14
DACVREF
AJ12
DACRSET
10%
50V
X7R
AK13
DACCOMP
AJ14
DACGND
AN9
DAC2VDD
AN10
DAC2VREF
AL10
DAC2RSET
AL11
DAC2COMP
IDUMPB
AJ13
DAC2GND
AL13
PLLVDD
AP2AJ5
XTALINXTALOUT
IC_NV28_GPU_BGA816_P10_SKT
BGA816_P10_NV28_SKT
Y200
12
27.000MHz
OSCF
10_10_5 PPM
COMMON
5%
C211
12
18PF
50V NPO
SMD0603
COMMON
DAC_XTAL_IN
CRTHSYNC
CRTVSYNC
DACRED
DACGREEN
DACBLUE
I2C1SCL
I2C1SDA
CRT2HSYNC
CRT2VSYNC
DAC2RED
DAC2GREEN
DAC2BLUE
I2C0SCL
I2C0SDA
DAC_XTAL_OUT
C212
12
18PF
50V NPO
SMD0603
COMMON
DAC_HSYNC
DAC_VSYNC
DAC_RED
DAC_GREEN
DAC_BLUE
I2CA_SCL
I2CA_SDA
DAC2_HSYNC
DAC2_VSYNC
DAC2_RED
DAC2_GREEN
I2CB_SCL
I2CB_SDA
5%
Resistors should be placed close together
R110633R
12
R110533R
12
5%
SEC_DVI_ISMD0603
5%
SEC_DVI_ISMD0603
Resistors should be placed close together
Resistors should be placed close together
R30233R
12
R30333R
12
5%
PRI_DVI_ISMD0603
5%
PRI_DVI_ISMD0603
R2032.2K
R2042.2K
R3012.2K
R3002.2K
Resistors should be placed close together
12
12
12
12
DAC_HSYNC 13
DAC_VSYNC 13
DAC_RED 13
DAC_GREEN 13
DAC_BLUE 13
5%
SEC_DVI_ISMD0603
5V
5%
5V
SEC_DVI_ISMD0603
5%
5V
PRI_DVI_ISMD0603
5%
5V
PRI_DVI_ISMD0603
TI2CA_SCL 13
TI2CA_SDA 13
DAC2_HSYNC 10
DAC2_VSYNC 10
DAC2_RED 10
DAC2_GREEN 10
DAC2_BLUE 10
TI2CB_SCL 10
TI2CB_SDA 10
AP1
AG5
AL12
AJ15
AM12
AE6
AN1
AL4
AM3
AJ11
AM10
AK11
AF6
AH4
Place Components close to the GPU
AA
"ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, "MATERIALS") ARE BEING PROVIDED "AS IS." NVIDIA MAKES NO
WARRANTIES, EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE."
5
4
3
2
1.c NV28 .. PLL / DAC / I2C
NVIDIA Corporation
2701 San Tomas Expressway
Santa Clara, CA 95050, USA
"ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, "MATERIALS") ARE BEING PROVIDED "AS IS." NVIDIA MAKES NO
WARRANTIES, EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE."
"ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, "MATERIALS") ARE BEING PROVIDED "AS IS." NVIDIA MAKES NO
WARRANTIES, EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE."
Santa Clara, CA 95050, USA
2701 San Tomas Expressway
NVIDIA Corporation
Frame Buffer 0..31
Size
CAGE Code
Custom
3
2
Scale
DWG NO
P151-A00-X04Wednesday, September 11, 2002
Sheet
1
519
of
Rev
5
FBB_DQS14
DD
FBB_DQS34
CC
FBB_DQS24
FBB_DATA[31:0]4
FBB_DQS04
BB
FBB_CLK0
FBB_CLK0-
C554
12
12
10PF
5%
50V NPO
SMD0402
AA
"ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, "MATERIALS") ARE BEING PROVIDED "AS IS." NVIDIA MAKES NO
WARRANTIES, EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE."