MSI H81TI User Manual [en, ru, de, fr]

The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks in this manual are properties of their respective owners.

MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.

￭

NVIDIA® is registered trademark of NVIDIA Corporation.

￭

ATI® is registered trademark of AMD Corporation.

￭

AMD® is registered trademarks of AMD Corporation.

￭

Intel® is registered trademarks of Intel Corporation.

￭

Windows® is registered trademarks of Microsoft Corporation.

￭

AMI® is registered trademark of American Megatrends Inc.

￭

Award® is a registered trademark of Phoenix Technologies Ltd.

￭

Sound Blaster® is registered trademark of Creative Technology Ltd.

￭

Realtek® is registered trademark of Realtek Semiconductor Corporation.

￭

JMicron® is registered trademark of JMicron Technology Corporation.

￭

Netware® is registered trademark of Novell, Inc.

￭

Lucid® is trademark of LucidLogix Technologies, Ltd.

￭

VIA® is registered trademark of VIA Technologies, Inc.

￭

ASMedia® is registered trademark of ASMedia Technology Inc.

￭

iPad, iPhone, and iPod are trademarks of Apple Inc.

￭

Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.

￭

Revision History

Revision Revision History Date

V2.0 First release 203/ 2

Preface

G52-7799X



Safety Instructions

Preface

Always read the safety instructions carefully.

￭

Keep this User’s Manual for future reference.

￭

Keep this equipment away from humidity.

￭

Lay this equipment on a reliable 󰘱at surface before setting it up.

￭

The openings on the enclosure are for air convection hence protects the

￭

equipment from overheating. DO NOT COVER THE OPENINGS. Make sure the voltage of the power source is at 0/220V before connecting the

￭

equipment to the power inlet. Place the power cord such a way that people can not step on it. Do not place

￭

anything over the power cord. Always Unplug the Power Cord before inserting any add-on card or module.

￭

All cautions and warnings on the equipment should be noted.

￭

Never pour any liquid into the opening that can cause damage or cause electrical

￭

shock. If any of the following situations arises, get the equipment checked by service

￭

personnel:

The power cord or plug is damaged.

◯

Liquid has penetrated into the equipment.

◯

The equipment has been exposed to moisture.

◯

The equipment does not work well or you can not get it work according to

◯

User’s Manual. The equipment has been dropped and damaged.

◯

The equipment has obvious sign of breakage.

◯

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC

￭

(40oF), IT MAY DAMAGE THE EQUIPMENT.

Battery Information

European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan: For better environmental protection, waste batteries should be

廢電池請回收

collected separately for recycling or special disposal.

California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

CAUTION: There is a risk of explosion, if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o󰘯 and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

◯

Increase the separation between the equipment and receiver.

◯

Connect the equipment into an outlet on a circuit di󰘯erent from that to which

◯

the receiver is connected. Consult the dealer or an experienced radio/television technician for help.

◯ Notice  The changes or modi󰘰cations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment. Notice 2 Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-7799

This device complies with Part 5 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and

)

this device must accept any interference received, including interference that

may cause undesired operation.

Preface

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.

Radiation Exposure Statement

Preface

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

European Community Compliance Statement

The equipment complies with the RF Exposure Requirement 999/59/EC, Council Recommendation of 2 July 999 on the limitation of exposure of the general public to electromagnetic 󰘰elds (0–300GHz). This wireless device complies with the R&TTE Directive.

Taiwan Wireless Statements

無線設備警告聲明經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更

頻率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應

立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

警告使用者:這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，使用者會被要求採取某些適當的對策。

Japan VCCI Class B Statement

クラス B 情報技術装置この装置は、情報技術装置等電波障害自主規制協議会（VCCI）の基準に基づくクラ

スB情報技術装置です。この装置が家庭内でラジオやテレビジョン受信機に近接して使われると、受信障害を引き起こすことがあります。取扱説明書にしたがって正しい取り扱いをしてください。

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at:

http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

产品中有毒有害物质或元素名称及含量

根据中国<电子信息产品污染控制管理办法>

有毒有害物质或元素

部件名称

印刷电路板组件* ☓ 〇〇〇〇〇

电池**

外部信号连接头 ☓ 〇〇〇〇〇

线材 ☓ 〇〇〇〇〇

〇: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T363-2006标

准规定的限量要求下。

☓: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T363-

2006标准规定的限量要求，但所有部件都符合欧盟RoHS要求。

* 印刷电路板组件: 包括印刷电路板及其构成的零部件。

** 电池本体上如有环保使用期限标识，以本体标识为主。

上述有毒有害物质或元素清单会依型号之部件差异而有所增减。

■

產品部件本体上如有环保使用期限标识，以本体标识为主。

■

铅

(Pb)汞(Hg)镉(Cd)

☓ 〇〇〇〇〇

六价铬 (Cr6+)

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

Preface

WEEE Statement

Preface

WEEE (Waste Electrical and Electronic Equipment)

ENGLISH

To protect the global environment and as an environmentalist, MSI must remind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes e󰘯ect on August 3, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen

Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et a󰘰n de protéger l’environnement, MSI tient à rappeler ceci... Au sujet de la directive européenne (EU) relative aux déchets des équipement

électriques et électroniques, directive 2002/96/EC, prenant e󰘯et le 3 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en 󰘰n de vie. MSI prendra en compte cette exigence relative au retour des produits en 󰘰n de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей

среды, поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива WEEE 2002/96/EC), вступающей в силу 3 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы. MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 3 de agosto de 2005, los productos clasi󰘰cados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al 󰘰nal de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat…. De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische

en Electronische producten (2002/96/EC), die op 3 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 3. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako 󰘰rma dbająca o ekologię, MSI przypomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 3 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

Preface

TÜRKÇE

Preface

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC

Kararnamesi altında 3 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje... Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických

výrobků 2002/96/EC platné od 3. srpna 2005 je zakázáno likvidovat “elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 3-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che…. In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali

Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 3 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come ri󰘰uti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla 󰘰ne del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla 󰘰ne del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta



Contents

English ......................................................................................

Motherboard Speci󰘰cations ....................................................................................2

Back Panel ..............................................................................................................4

CPU & Heatsink Installation ....................................................................................5

Memory Installation .................................................................................................7

Internal Connectors.................................................................................................

BIOS Setup .............................................................................................................26

한국어 .......................................................................................33

메인보드 사양 .........................................................................................................34

후면 패널 .................................................................................................................36

CPU 및 히트싱크 설치 ............................................................................................37

메모리 설치 .............................................................................................................39

내장 커넥터 .............................................................................................................40

BIOS 설정 ...............................................................................................................4

Français ....................................................................................55

Spéci󰘰cations ..........................................................................................................56

Panneau Arrière ......................................................................................................5

Installation du CPU et son ventilateur .....................................................................59

Installation de mémoire ...........................................................................................6

Connecteurs internes ..............................................................................................62

Con󰘰guration BIOS .................................................................................................70

Deutsch ....................................................................................77

Spezi󰘰kationen........................................................................................................7

Rücktafel-Übersicht.................................................................................................0

CPU & Kühlkörper Einbau ......................................................................................

Speicher ..................................................................................................................3

Interne Anschlüsse .................................................................................................4

BIOS Setup .............................................................................................................92

Русский ....................................................................................99

Характеристики материнской платы..................................................................00

Задняя панель .....................................................................................................02

Установка ЦП и радиатора .................................................................................03

Установка памяти ................................................................................................05

Внутренние разъемы ..........................................................................................06

Настройка BIOS ..................................................................................................4

Preface

简体中文 .................................................................................2

主板规格 ................................................................................................................22

Preface

后置面板指南 ........................................................................................................24

CPU & 风扇安装 ....................................................................................................25

内存安装 ................................................................................................................27

内部接口 ................................................................................................................2

BIOS Setup ...........................................................................................................36

繁體中文 .................................................................................43

主機板規格 ............................................................................................................44

背板 .......................................................................................................................46

安裝 CPU 與散熱風扇 ...........................................................................................47

安裝記憶體 ............................................................................................................49

內建接頭 ................................................................................................................50

BIOS 設定 .............................................................................................................5

日本語 .....................................................................................65

マザーボードの仕様 ..............................................................................................66

I/Oパネル ..............................................................................................................6

CPUおよびヒートシンクの装着 ...........................................................................69

メモリの装着 ........................................................................................................7

内部コネクター .....................................................................................................72

BIOSの設定 ...........................................................................................................0

0

English

JTPM 1

MINI _PCIE 2

MINI _PCIE 1

JAUD 1

JBAT1

JCI1

JAMP 1

JDMI C1

JUSB 2

JUSB 1

JLVDS _BK1

VDS1

JFPD 1

LVDS_ POWER 1

JFP1

JCIR 1

CPUFA N

JMON ITOR_ SWITC H1

DIMM 2

SATA_PO WER1

DIMM 1

SATA1

SYSFA N1

SATA2

DC in connector

USB 2.0 ports

HDMI port

E-SATA port

USB 3.0 ports

LAN port

Line-out port

Mic-in port

Thank you for choosing the HTI Series (MS-7799 v2.X) Thin Mini-ITX motherboard. The HTI Series motherboards are based on Intel H chipset for optimal system e󰘲ciency. Designed to 󰘰t the advanced Intel LGA50 processor, the HTI Series motherboards deliver a high performance and professional desktop platform solution.

Layout

English



Motherboard Speci󰘰cations

CPU Support

Chipset Intel® H Express Chipset■

English

Memory Support

Expansion Slots

Onboard Graphics

Storage Intel H Express Chipset

USB 3.0 Intel H Express Chipset

USB 2.0 Intel H Express Chipset

Audio Realtek® ALC7 Codec■

LAN Realtek® RTLG Gigabit LAN controller■

Back Panel Connectors

4th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3 /

■ Pentium® / Celeron® processors for LGA 50 socket

2x DDR3 SO-DIMM memory slots supporting up to 6GB

■ Supports DDR3 600/ 333/ 066 MHz

■ Dual channel memory architecture

■

x Mini-PCIe x slot (MINI_PCIE2)*

■

* For half size

x HDMI port, supporting a maximum resolution of

■ 4096x260@24Hz

■

2x SATA 6Gb/s ports

x mSATA 3Gb/s port (MINI_PCIE)*

* Also could support mini-PCIe interface card.

■ 2x USB 3.0 ports on the back panel

■ 6x USB 2.0 ports (2 ports on the back panel, 4 ports

available through the internal USB 2.0 connectors)

x DC power-in connector

■ x eSATA port

■ x HDMI port

■ 2x USB 2.0 ports

■ 2x USB 3.0 ports

■ x LAN (RJ45) port

■ 2x audio jacks (Mic-In, Line-out)

■

2

Internal Connectors

BIOS Features

Form Factor Thin mini-ITX Form Factor

x SATA power connector

■ 2x SATA 6Gb/s connectors

■ 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)

■ x 4-pin CPU fan connector

■ x 4-pin System fan connector

■ x Front panel audio connector

■ x TPM connector

■ x System panel connector

■ x Chassis intrusion connector

■ x Clear CMOS jumper

■ x Flat panel display connector

■ x Flat panel display switch connector

■ x LVDS connector

■ x LVDS power connector

■ x LVDS backlight power connector

■ x Digital microphone connector

■ x Audio ampli󰘰er connector

■ x Consumer infrared receiver connector

■

UEFI AMI BIOS

■ ACPI 5.0, PnP .0a, SM BIOS 2.7, DMI 2.0

■ Multi-language

■

6.7 in. x 6.7 in. (7.0 cm x 7.0 cm)

■

For the latest information about CPU, please visit http://www.msi.com/service/cpu-support/

For more information on compatible components, please visit http://www.msi.com/service/test-report/

English

3

Back Panel

USB 2.0

DC Power-in

LAN

English

eSATA

USB 3.0

Line-out Mic-inHDMI

DC Power-in

This connector allows you to connect the DC power.

LAN LED Indicator

LINK/ACT

LED

LED LED Status Description

Link/ Activity LED

Speed LED

SPEED

LED

O󰘯 No link

Yellow Linked

Blinking Data activity

O󰘯 0 Mbps connection

Green 00 Mbps connection

Orange  Gbps connection

Line-out (Green)

Line-out, the default front speaker out jack, is a connector for headphone or speakers.

Mic-in (Pink)

Mic-in, the default microphone-in jack, is a connector for microphone.

4

CPU & Heatsink Installation

When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and heatsink installation. Wrong installation can damage both the CPU and the motherboard.

Video Demonstration

Watch the video to learn how to install CPU & heatsink.

http://youtu.be/bf5La099urI

. Push the load lever down to unclip it and lift to the fully open position.

2. The load plate will automatically lift up as the load lever is pushed to the fully open position.

Important

Do not touch the socket contacts or the bottom of the CPU.

3. Align the notches with the socket alignment keys. Lower the CPU straight down, without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is properly seated in the socket.

4. Close and slide the load plate under the retention knob. Close and engage the load lever.

CPU notches

English

Alignment Key

5

5. When you press down the load lever the PnP cap will automatically pop up from the CPU socket. Do not discard the PnP cap. Always replace the PnP cap if the CPU is removed from the socket.

6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the CPU. This will help in heat dissipation and prevent CPU overheating.

English

7. Locate the CPU fan connector on the motherboard.

. Place the heatsink on the motherboard with the fan’s cable facing towards the

fan connector and the fasteners matching the holes on the motherboard.

9. Push down the heatsink until the four fasteners get wedged into the holes on the motherboard. Press the four fasteners down to fasten the heatsink. As each fastener locks into position a click should be heard.

0. Inspect the motherboard to ensure that the fastener-ends have been properly

locked in place.

. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.

Thermal paste

Important

Con󰘰rm that the CPU heatsink has formed a tight seal with the CPU before booting

•

your system. Whenever the CPU is not installed, always protect the CPU socket pins by

•

covering the socket with the plastic cap. If you purchased a separate CPU and heatsink/ cooler, Please refer to the

•

documentation in the heatsink/ cooler package for more details about installation.

6

Memory Installation

The SO-DIMM slot is intended for memory modules.

Locate the SO-DIMM slot. Align the notch on the DIMM with the key on the slot

.

and insert the DIMM into the slot. Push the DIMM gently downwards until the slot levers click and lock the DIMM

in place.



Important

You can barely see the golden 󰘰nger if the DIMM is properly inserted in the DIMM

•

slot. To uninstall the DIMM, 󰘱ip the slot levers outwards and the DIMM will be released

•

instantly.

English

7

Internal Connectors

SATA_POWER: SATA Power Connector

This connector is used to provide power to SATA device. Please use a SATA power cable connect onboard SATA power connector with SATA device’s power connector.

English

SATA~2: SATA Connectors

This connector is a high-speed SATA interface port. Each connector can connect to one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD/ DVD/ Blu-Ray).

Video Demonstration

Watch the video to learn how to Install SATA HDD.

http://youtu.be/RZsMpqxythc

SATA

SATA2

Important

Many SATA devices also need a power cable from the power supply. Such devices

•

include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD / Blu-Ray). Please refer to the device’s manual for further information.

•

Many computer cases also require that large SATA devices, such as HDDs, SSDs, and optical drives, be screwed down into the case. Refer to the manual that came with your computer case or your SATA device for further installation instructions.

Please do not fold the SATA cable at a 90-degree angle. Data loss may result

•

during transmission otherwise.

•

SATA cables have identical plugs on either sides of the cable. However, it is recommended that the 󰘱at connector be connected to the motherboard for space saving purposes.



JCI: Chassis Intrusion Connector

1.G ro und

2.+ 12 V

3.S en s

4.S pe ed

ont ro

1.G ro und

2.S pe ed

ont ro

3.S en s

4.N C

This connector connects to the chassis intrusion switch cable. If the computer case is opened, the chassis intrusion mechanism will be activated. The system will record this intrusion and a warning message will 󰘱ash on screen. To clear the warning, you must enter the BIOS utility and clear the record.

CPUFAN,SYSFAN: Fan Power Connectors

The fan power connectors support system cooling fans with +2V. If the motherboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans. Some system fans may not connect to the motherboard and will instead connect to the power supply directly. A system fan can be plugged into any available system fan connector.

CPUFAN SYSFAN

Important

Please refer to your processor’s o󰘲cial website or consult your vendor to 󰘰nd

•

recommended CPU heatsink. These connectors support Smart Fan Control with liner mode. The Command

•

Center utility can be installed to automatically control the fan speeds according to the CPU’s and system’s temperature.

If there are not enough ports on the motherboard to connect all system fans,

•

adapters are available to connect a fan directly to a power supply. Before 󰘰rst boot up, ensure that there are no cables impeding any fan blades.

•

English

9

JAUD: Front Panel Audio Connector

1.M I C L

3.M I C R

10. He ad

hon e

Det ec ti on

5.H ea d

hon e

7.S EN SE _SE N

9.H ea d

hon e

8.N o Pi

6.M I C D

ete ct io n

4.N C

.Gr ou nd

.Fr on t_L -

.Fr on t_L +

.Fr on t_R +

.Fr on t_R -

10. No

14. Groun d

8.5 V P

owe r

12. Groun d

6.S erial

4.3 .3V

owe r

2.3 V Sta ndby

owe r

1.L P C C

loc

3.L P C

Res e

5.L P C a

ddr es

s &

dat a

in0

7.L P C a

ddr es

s &

dat a

in1

9.L P C a

ddr es

s &

dat a

pin 2

.LP C

ddr es

s &

dat a

pin 3

13. LP C

Fra m

This connector allows you to connect the front audio panel located on your computer case. This connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide.

English

JAMP: Audio Ampli󰘰er Connector

This connector is used to connect audio ampli󰘰ers to enhance audio performance.

JTPM: TPM Module Connector

This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.

JUSB~2: USB 2.0 Expansion Connectors

1. +

10. No

Res et

wit ch

HDD

owe r

wit ch

owe r

7. +

9.R es erv e

6. +

4.-

2. +

This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others.

Important

Note that the VCC and GND pins must be connected correctly to avoid possible damage.

JFP: System Panel Connector

This connector connects to the front panel switches and LEDs. The JFP connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. When installing the front panel connector, please use the optional M-Connector to simplify installation. Plug all the wires from the computer case into the M-Connector and then plug the M-Connector into the motherboard.

Video Demonstration

Watch the video to learn how to Install front panel connector.

http://youtu.be/DPELIdVNZUI

English

Important

On the connectors coming from the case, pins marked by small triangles are positive wires. Please use the diagrams above and the writing on the optional M-Connectors to determine correct connector orientation and placement.

2

JCIR: Consumer Infrared Receiver Connector

1. Gro un d

8.C IR _in pu t

5.5 V Sta nd by

6.V C C

4.L ea rn_ in +

2.L E D

.GN

4.D MI C_C LO CK

1.+ 3. 3

2.D MI C_D A

1.M ON _S

2.G N D

This connector is used to connect to a consumer infrared receiver. You must con󰘰gure the setting through the BIOS setup to use the infrared function.

English

JDMIC: Digital Microphone Connector

This connector is used to connect to the digital microphone.

JMONITOR_SWITCH: Flat Panel Display Switch Connector

This connector is used to connect an on/ o󰘯 switch for 󰘱at panel display.

JFPD: Flat Panel Display Connector

2.B KL

T_P W

3.B K LT

_PW R

6.B KL

T_G ND /

Bri gh tne ss_ GN

4.B KL

T_P W

7.B ri ght nes s_ Up

5.B K LT

_GN D/

Bri gh tne ss_ GN

8.B ri ght nes s_ Dow n

1.B KL

T_E N

This connector provides a high-speed interface typically used with 󰘱at panel displays.

JLVDS: LVDS Connector

The LVDS (Low Voltage Di󰘯erential Signal) connector provides a digital interface typically used with 󰘱at panels. After connecting an LVDS interface 󰘱at panel to the LVDS connector, be sure to check the panel datasheet and set the LVDS power connector to proper power voltage.

English



Pin De󰘰nition Pin De󰘰nition

. ODD_Lane3_P 2. NC

2. ODD_Lane3_N 22. EDID_3.3V

3. ODD_Lane2_P 23. LCD_GND

4. ODD_Lane2_N 24. LCD_GND

5. ODD_Lane_P 25. LCD_GND

6. ODD_Lane_N 26. ODD_CLK_P

7. ODD_Lane0_P 27. ODD_CLK_N . ODD_Lane0_N 2. BLKT_GND

9. EVEN_Lane3_P 29. BLKT_GND 0. EVEN_Lane3_N 30. BLKT_GND . EVEN_Lane2_P 3. EDID_CLK 2. EVEN_Lane2_N 32. BLKT_ENABLE 3. EVEN_Lane_P 33. BLKT_PWM_DIM 4. EVEN_Lane_N 34. EVEN_CLK_P 5. EVEN_Lane0_P 35. EVEN_CLK_N 6. EVEN_Lane0_N 36. BLKT_PWR 7. EDID_GND 37. BLKT_PWR . LCD_VCC 3. BLKT_PWR 9. LCD_VCC 39. NC

20. LCD_VCC 40. EDID_DATA

JLVDS_POWER: LVDS Power Connector

Use this connector to specify the operation voltage of the LVDS interface 󰘱at panel.

English

5 3



5 3



9V

(default)

JLVDS_BK: LVDS Backlight Power Connector

This connector is provided for LCD backlight options.



9V



2V

(default)

JBAT: Clear CMOS Jumper

There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system con󰘰guration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system con󰘰guration, set the jumpers to clear the CMOS RAM.



Keep Data Clear Data

Important

You can clear the CMOS RAM by shorting this jumper while the system is o󰘯. Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on because it will damage the motherboard.

5 3 

MINI_PCIE~2: Mini - PCIe Expansion Slots

The mini-PCIe slot supports the mini-PCIe interface expansion card.

MINI_PCIE supports full size and also supports mSATA function.

MINI_PCIE2 supports half size

Important

When adding or removing expansion cards, always turn o󰘯 the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.

English

BIOS Setup

The default settings o󰘯er the optimal performance for system stability in normal conditions. You may need to run the Setup program when:

An error message appears on the screen during the system booting up, and

■ requests you to run SETUP.

English

You want to change the default settings for customized features.

■

Important

Please load the default settings to restore the optimal system performance and

•

stability if the system becomes unstable after changing BIOS settings. Select the "Restore Defaults" and press <Enter> in BIOS to load the default settings.

If you are unfamiliar with the BIOS settings, we recommend that you keep the

•

default settings to avoid possible system damage or failure booting due to inappropriate BIOS con󰘰guration.

Entering BIOS Setup

Power on the computer and the system will start the Power On Self Test (POST) process. When the message below appears on the screen, please <DEL> key to enter BIOS:

Press DEL key to enter Setup Menu, F to enter Boot Menu

If the message disappears before you respond and you still need to enter BIOS, restart the system by turning the computer OFF then back ON or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

MSI additionally provides a method to enter the BIOS setup. You can click the “GO2BIOS” tab on “MSI Fast Boot” utility screen to enable the system going to BIOS setup directly at next boot.

Click "GO2BIOS" tab on "MSI Fast Boot" utility screen.

Important

Please be sure to install the “MSI Fast Boot” utility before using it to enter the BIOS setup.

Overview

After entering BIOS, the following screen is displayed.

Model name

Virtual OC Genie Button

BIOS menu selection

Temperature monitor

Menu display

OC Menu

Language

System information

Boot device priority bar

BIOS menu selection

English

Important

Overclocking your PC manually is only recommended for advanced users.

•

Overclocking is not guaranteed, and if done improperly, can void your warranty or

•

severely damage your hardware. If you are unfamiliar with overclocking, we advise you to use OC Genie for easy

•

overclocking.

Current CPU/ DRAM/ Ring Frequency

▶ These items show the current frequencies of installed CPU, Memory and Ring.

Read-only.

Adjust CPU Ratio [Auto]

▶ Sets the CPU ratio that is used to determine CPU clock speed. This item can only be

changed if the processor supports this function.

English

Adjusted CPU Frequency

▶ Shows the adjusted CPU frequency. Read-only.

EIST [Enabled]

▶ Enables or disables the Enhanced Intel® SpeedStep Technology. This item will be

available when "Adjust CPU Ratio" is set to [Auto]. [Enabled] Enables the EIST to adjust CPU voltage and core frequency

[Disabled] Disables EIST.

Intel Turbo Boost [Enabled]

▶ Enables or disables the Intel® Turbo Boost. This item appears when the installed

CPU supports this function. [Enabled] Enables this function to boost CPU performance automatically

[Disabled] Disables this function.

Adjust Ring Ratio [Auto]

▶ Sets the ring ratio. The valid value range depends on the installed CPU.

Adjusted Ring Frequency

▶ Shows the adjusted Ring frequency. Read-only.

Adjust GT Ratio [Auto]

▶ Sets the integrated graphics ratio. The valid value range depends on the installed

CPU.

Adjusted GT Frequency

▶ Shows the adjusted integrated graphics frequency. Read-only.

DRAM Frequency [Auto]

▶ Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.

Adjusted DRAM Frequency

▶ Shows the adjusted DRAM frequency. Read-only.

dynamically. It can decrease average power consumption and average heat production.

above rated speci󰘰cations when system request the highest performance state.

2

DRAM Timing Mode [Auto]

▶ Selects the memory timing mode. [Auto] DRAM timings will be determined based on SPD (Serial Presence

[Link] Allows user to con󰘰gure the DRAM timing manually for all memory

[UnLink] Allows user to con󰘰gure the DRAM timing manually for respective

Advanced DRAM Con󰘰guration

▶ Press <Enter> to enter the sub-menu. This sub-menu will be activated after setting

[Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each memory channel. The system may become unstable or unbootable after changing memory timing. If it occurs, please clear the CMOS data and restore the default settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to load the default settings.)

Memory Fast Boot [Auto]

▶ Enables or disables the initiation and training for memory every booting. [Auto] This setting will be con󰘰gured automatically by BIOS. [Enabled] Memory will completely imitate the archive of 󰘰rst initiation and

[Disabled] The memory will be initialed and trained every booting.

DRAM Voltage [Auto]

▶ Sets the value for appointed voltage related to memory/ PCH. If set to "Auto", BIOS

will set the voltage automatically or you can set it manually.

CPU Memory Changed Detect [Enabled]

▶ Enables or disables the system to issue a warning message during boot when the

CPU or memory has been replaced. [Enabled] The system will issue a warning message during boot and than

[Disabled] Disables this function and keeps the current BIOS settings.

CPU Speci󰘰cations

▶ Press <Enter> to enter the sub-menu. This sub-menu displays the information of

installed CPU. You can also access this information menu at any time by pressing [F4]. Read only.

CPU Technology Support

▶ Press <Enter> to enter the sub-menu. The sub-menu shows what the key

features does the installed CPU support. Read only.

Detect) of installed memory modules.

channel.

memory channel.

󰘰rst training. After that, the memory will not be initialed and trained when booting to accelerate the system booting time.

needs to load the default settings for new devices.

English

MEMORY-Z

▶ Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and

timings of installed memory. You can also access this information menu at any time by pressing [F5].

DIMM~2 Memory SPD

▶

English

Press <Enter> to enter the sub-menu. The sub-menu displays the information of installed memory. Read only.

CPU Features

▶ Press <Enter> to enter the sub-menu.

Active Processor Cores [All]

▶ This item allows you to select the number of active processor cores.

Limit CPUID Maximum [Disabled]

▶ Enables or disables the extended CPUID value.

[Enabled] BIOS will limit the maximum CPUID input value to circumvent

[Disabled] Use the actual maximum CPUID input value.

Execute Disable Bit [Enabled]

▶ Intel’s Execute Disable Bit functionality can prevent certain classes of malicious

“bu󰘯er over󰘱ow” attacks where worms attempt to execute code to damage the system. It is recommended that keeps this item enabled always.

[Enabled] Enables NO-Execution protection to prevent the malicious

[Disabled] Disables this function.

Intel Virtualization Tech [Enabled]

▶ Enables or disables Intel Virtualization technology. [Enabled] Enables Intel Virtualization technology and allows a platform

[Disabled] Disables this function.

Hardware Prefetcher [Enabled]

▶

Enables or disables the hardware prefetcher (MLC Streamer prefetcher). [Enabled] Allows the hardware prefetcher to automatically pre-fetch

[Disabled] Disables the hardware prefetcher.

boot problems with older operating system that do not support the processor with extended CPUID value.

attacks and worms.

to run multiple operating systems in independent partitions. The system can function as multiple systems virtually.

data and instructions into L2 cache from memory for tuning the CPU performance.

+ 156 hidden pages

MSI H81TI User Manual [en, ru, de, fr]

Specifications and Main Features

Frequently Asked Questions

User Manual

English

Back Panel

CPU & Heatsink Installation

Memory Installation

Internal Connectors

BIOS Setup