MSI CSM-B85M-E45 User Manual

Download

B85M-E45

Motherboard

Preface

G52-78171X2

Preface

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks in this manual are properties of their respective owners.

MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.

￭

NVIDIA® is registered trademark of NVIDIA Corporation.

￭

ATI® is registered trademark of AMD Corporation.

￭

AMD® is registered trademarks of AMD Corporation.

￭

Intel® is registered trademarks of Intel Corporation.

￭

Windows® is registered trademarks of Microsoft Corporation.

￭

AMI® is registered trademark of American Megatrends Inc.

￭

Award® is a registered trademark of Phoenix Technologies Ltd.

￭

Sound Blaster® is registered trademark of Creative Technology Ltd.

￭

Realtek® is registered trademark of Realtek Semiconductor Corporation.

￭

JMicron® is registered trademark of JMicron Technology Corporation.

￭

Netware® is registered trademark of Novell, Inc.

￭

Lucid® is trademark of LucidLogix Technologies, Ltd.

￭

VIA® is registered trademark of VIA Technologies, Inc.

￭

ASMedia® is registered trademark of ASMedia Technology Inc.

￭

iPad, iPhone, and iPod are trademarks of Apple Inc.

￭

Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.

￭

Revision History

Revision Revision History Date V2.0 First release 2013/ 06

iiPreface

Smartphone Application

MSI+ is a smart web gadget that works as a shopping navigator and provides specs comparison for IT buyers. With a simple tap of the smartphone, you'll e󰘲ciently locate your ideal products from a wide variety of choices and, if product details are required, you may easily download user manuals within minutes. Better yet, the power calculator provides accurate estimates of power unit capacity for DIY users.

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.

Preface

Visit the MSI website for technical guide, BIOS updates, driver updates, and other information:

http://www.msi.com/service/download/

Contact our technical sta󰘯 at:

http://support.msi.com

iii Preface

Preface

Safety Instructions

Always read the safety instructions carefully.

￭

Keep this User’s Manual for future reference.

￭

Keep this equipment away from humidity.

￭

Lay this equipment on a reliable 󰘱at surface before setting it up.

￭

The openings on the enclosure are for air convection hence protects the equipment

￭

from overheating. DO NOT COVER THE OPENINGS. Make sure the voltage of the power source is at 110/220V before connecting the

￭

equipment to the power inlet. Place the power cord such a way that people can not step on it. Do not place

￭

anything over the power cord. Always Unplug the Power Cord before inserting any add-on card or module.

￭

All cautions and warnings on the equipment should be noted.

￭

Never pour any liquid into the opening that can cause damage or cause electrical

￭

shock. If any of the following situations arises, get the equipment checked by service

￭

personnel:

The power cord or plug is damaged.

◯

Liquid has penetrated into the equipment.

◯

The equipment has been exposed to moisture.

◯

The equipment does not work well or you can not get it work according to

◯

User’s Manual. The equipment has been dropped and damaged.

◯

The equipment has obvious sign of breakage.

◯

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC (140oF),

￭

IT MAY DAMAGE THE EQUIPMENT.

ivPreface

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o󰘯 and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

◯

Increase the separation between the equipment and receiver.

◯

Connect the equipment into an outlet on a circuit di󰘯erent from that to which

◯

the receiver is connected. Consult the dealer or an experienced radio/television technician for help.

◯ Notice 1 The changes or modi󰘰cations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment. Notice 2 Shielded interface cables and A.C. power cord, if any, must be used in order to comply

with the emission limits. VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-7817

Preface

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference that may

cause undesired operation.

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.

v Preface

Preface

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

European Community Compliance Statement

The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic 󰘰elds (0–300GHz). This wireless device complies with the R&TTE Directive.

Taiwan Wireless Statements

無線設備警告聲明經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻

率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立

即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

警告使用者:這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，使用者會被要求採取某些適當的對策。

Japan VCCI Class B Statement

クラス B 情報技術装置この装置は、情報技術装置等電波障害自主規制協議会（VCCI）の基準に基づくクラ

スB情報技術装置です。この装置が家庭内でラジオやテレビジョン受信機に近接して使われると、受信障害を引き起こすことがあります。取扱説明書にしたがって正しい取り扱いをしてください。

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음

viPreface

Battery Information

European Union: Batteries, battery packs, and accumulators should not be disposed of

as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan: For better environmental protection, waste batteries should be collected

separately for recycling or special disposal.

廢電池請回收

California, USA: The button cell battery may contain perchlorate material and requires

special handling when recycled or disposed of in California. For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

CAUTION: There is a risk of explosion, if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at:

http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

Preface

vii Preface

WEEE (Waste Electrical and Electronic Equipment) Statement

Preface

ENGLISH

To protect the global environment and as an environmentalist, MSI must remind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes e󰘯ect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen

Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et a󰘰n de protéger l’environnement, MSI tient à rappeler ceci... Au sujet de la directive européenne (EU) relative aux déchets des équipement

électriques et électroniques, directive 2002/96/EC, prenant e󰘯et le 13 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en 󰘰n de vie. MSI prendra en compte cette exigence relative au retour des produits en 󰘰n de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы. MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.

viiiPreface

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda: Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o

equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasi󰘰cados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al 󰘰nal de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat…. De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische

en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.

Preface

POLSKI

Aby chronić nasze środowisko naturalne oraz jako 󰘰rma dbająca o ekologię, MSI przypomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

ix Preface

Preface

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC

Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje... Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků

2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che…. In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici

ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come ri󰘰uti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla 󰘰ne del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla 󰘰ne del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta

xPreface

CONTENTS

▍

Preface ............................................................................................................i

Copyright Notice ......................................................................................................ii

Trademarks ..............................................................................................................ii

Revision History ......................................................................................................ii

Smartphone Application ..........................................................................................iii

Technical Support ..................................................................................................iii

Safety Instructions ..................................................................................................iv

FCC-B Radio Frequency Interference Statement ................................................... v

CE Conformity ......................................................................................................... v

Radiation Exposure Statement ...............................................................................vi

European Community Compliance Statement ........................................................vi

Taiwan Wireless Statements ...................................................................................vi

Japan VCCI Class B Statement ..............................................................................vi

Korea Warning Statements .....................................................................................vi

Battery Information .................................................................................................vii

Chemical Substances Information .........................................................................vii

WEEE (Waste Electrical and Electronic Equipment) Statement ...........................viii

Chapter 1 Getting Started............................................................................1-1

Packing Contents .................................................................................................1-2

Optional Accessories ...........................................................................................1-2

Assembly Precautions ..........................................................................................1-3

Motherboard Speci󰘰cations ..................................................................................1-4

Connectors Quick Guide ......................................................................................1-6

Back Panel Quick Guide ......................................................................................1-8

CPU (Central Processing Unit) ..........................................................................1-10

Introduction to the LGA 1150 CPU ..............................................................1-10

CPU & Heatsink Installation .........................................................................1-11

Memory ..............................................................................................................1-14

Dual-Channel mode Population Rule ..........................................................1-14

Mounting Screw Holes .......................................................................................1-15

Power Supply .....................................................................................................1-16

JPWR1~2: ATX Power Connectors .............................................................1-16

Expansion Slots .................................................................................................1-17

PCI_E1~E3: PCIe Expansion Slots .............................................................1-17

PCI1: PCI Expansion Slot ............................................................................ 1-17

Video/ Graphics Cards ......................................................................................1-18

Single Video Card Installation ......................................................................1-18

Preface

xi Preface

Preface

Internal Connectors ............................................................................................ 1-19

SATA1~6: SATA Connectors ......................................................................1-19

CPUFAN,SYSFAN1~2: Fan Power Connectors .......................................... 1-20

JFP1, JFP2: System Panel Connectors ......................................................1-21

JUSB1~2: USB 2.0 Expansion Connector ................................................... 1-22

JUSB3: USB 3.0 Expansion Connector ....................................................... 1-22

JCI1: Chassis Intrusion Connector ..............................................................1-23

JAUD1: Front Panel Audio Connector .........................................................1-23

JTPM1: TPM Module Connector .................................................................1-24

JLPT1: Parallel Port Connector ...................................................................1-24

JCOM1: Serial Port Connector ....................................................................1-25

Jumper ...............................................................................................................1-25

JBAT1: Clear CMOS Jumper .......................................................................1-25

Drivers and Utilities ............................................................................................1-26

Total Installer ...............................................................................................1-26

Chapter 2 Quick Installation ........................................................................2-1

CPU Installation ...................................................................................................2-2

Memory Installation ..............................................................................................2-4

Motherboard Installation .......................................................................................2-5

Power Connectors Installation .............................................................................2-7

SATA HDD Installation ......................................................................................... 2-9

mSATA SSD Installation ....................................................................................2-10

Front Panel Connector Installation ..................................................................... 2-11

JFP1 Connecotr Installation .........................................................................2-11

Front Panel Audio Connector Installation ....................................................2-11

Peripheral Connector Installation .......................................................................2-12

USB2.0 Connector Installation .....................................................................2-12

USB3.0 Connector Installation .....................................................................2-12

Graphics Card Installation .................................................................................. 2-13

Chapter 3 BIOS Setup .................................................................................3-1

Entering Setup .....................................................................................................3-2

Entering BIOS Setup .....................................................................................3-2

Overview ..............................................................................................................3-3

Operation .............................................................................................................3-5

SETTINGS ...........................................................................................................3-6

System Status ................................................................................................3-6

Advanced ....................................................................................................... 3-7

Boot .............................................................................................................3-14

xiiPreface

Security ........................................................................................................ 3-14

Save & Exit ..................................................................................................3-15

OC ...................................................................................................................... 3-16

M-FLASH ...........................................................................................................3-22

OC PROFILE .....................................................................................................3-23

HARDWARE MONITOR ....................................................................................3-24

Appendix A Intel SBA ................................................................................. A-1

Prerequisites ........................................................................................................A-2

Installing Intel SBA ...............................................................................................A-3

Software Con󰘰guration .........................................................................................A-3

Software panel overview ................................................................................A-3

Password settings ..........................................................................................A-4

Help Button ..........................................................................................................A-4

Preface

xiii Preface

Chapter 1

Getting Started

Thank you for choosing the B85M-E45 Series (MS-7817 v2.X) Micro-ATX motherboard. The B85M-E45 Series motherboards are based on Intel® B85 chipset for optimal system e󰘲ciency. Designed to 󰘰t the advanced Intel® LGA1150 processor, the B85M-E45 Series motherboards deliver a high performance and professional desktop platform solution.

Packing Contents

Chapter 1

Optional Accessories

USB 3.0 Bracket

* These pictures are for reference only and may vary without notice. * The packing contents may vary according to the model you purchased. * If you need to purchase the optional accessories or request part numbers, please

visit the MSI website at http://www.msi.com/index.php or consult the dealer.

Motherboard

SATA Cable

Drivers & Utilities

Disc

Software & Application

User Guide

M-Connector

Motherboard

User Guide

I/O Shield

1-2Getting Started

Assembly Precautions

The components included in this package are prone to damage from electrostatic

■ discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. Always turn o󰘯 the power supply and unplug the power cord from the power outlet

■ before installing or removing any computer component. Ensure that all components are securely connected. Loose connections may cause

■ the computer to not recognize a component or fail to start. Hold the motherboard by the edges to avoid touching sensitive components.

■ It is recommended to wear an electrostatic discharge (ESD) wrist strap when

■ handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard. Store the motherboard in an electrostatic shielding container or on an antistatic pad

■ whenever the motherboard is not installed. Before turning on the computer, ensure that there are no loose screws or metal

■ components on the motherboard or anywhere within the computer case. Do not use the computer in a high-temperature environment.

■ Do not boot the computer before installation is completed. This could cause

■ permanent damage to the components as well as injury to the user. If you need help during any installation step, please consult a certi󰘰ed computer

■ technician.

Important

A screwdriver (not included) may be required for computer assembly.

Chapter 1

1-3 Getting Started

Motherboard Speci󰘰cations

CPU Support

Chipset Intel® B85 Express Chipset■ Memory

Support

Expansion

Chapter 1

Slots

Onboard Graphics

Storage Intel® B85 Express Chipset

USB Intel B85 Express Chipset

Audio Realtek® ALC887 Codec

LAN 1x Realtek® 8111G Gigabit LAN controller■ Back Panel

Connectors

4th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® /

■ Celeron® processors for LGA 1150 socket

4x DDR3 memory slots supporting up to 32GB

■ Supports DDR3 1600/ 1333/ 1066 MHz

■ Dual channel memory architecture

■ Supports non-ECC, un-bu󰘯ered memory

■ Supports Intel® Extreme Memory Pro󰘰le (XMP)

■ 1x PCIe 3.0 x16 slot

■ 2x PCIe 2.0 x1 slots

■ 1x PCI slot

■ 1x HDMI port, supporting the maximum resolution of

■ 4096x2160@24Hz, 24bpp/ 2560x1600@60Hz, 24bpp/ 1920x1080@60Hz, 36bpp 1x VGA port, supporting a maximum resolution of 1920x1200 @

■ 60Hz 1x DVI-D port, supporting a maximum resolution of 1920x1200 @

■ 60Hz

■

4x SATA 6Gb/s ports (SATA1~4)

2x SATA 3Gb/s ports (SATA5~6)

Supports Intel® Rapid Start Technology, Intel® Smart Connect

Technology*

* Supports Intel Core processors on Windows 7 and Windows 8.

■ 4x USB 3.0 ports (2 ports on the back panel, 2 ports available

through the internal USB 3.0 connector) 8x USB 2.0 ports (4 ports on the back panel, 4 ports available

through the internal USB connectors)

■

7.1-Channel High De󰘰nition Audio

1x PS/2 keyboard port

■ 1x PS/2 mouse port

■ 4x USB 2.0 ports

■ 1x HDMI port

■ 2x USB 3.0 ports

■ 1x VGA port

■ 1x DVI-D port

■ 1x LAN (RJ45) port

■ 3x audio jacks

■

1-4Getting Started

Internal Connectors

I/O Controller

Hardware Monitor

BIOS Features

Special Features

Software Drivers

Form Factor

1x 24-pin ATX main power connector

■ 1x 4-pin ATX 12V power connector

■ 4x SATA 6Gb/s connectors

■ 2x SATA 3Gb/s connectors

■ 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)

■ 1x USB 3.0 connector (supports additional 2 USB 3.0 ports)

■ 1x 4-pin CPU fan connector

■ 1x 4-pin system fan connector

■ 1x 3-pin system fan connector

■ 1x Clear CMOS jumper

■ 1x Front panel audio connector

■ 2x System panel connectors

■ 1x TPM module connector

■ 1x Serial port connector

■ 1x Parallel port connector

■ 1x Chassis Intrusion connector

■ NUVOTON NCT6779 Controller Chip■

CPU/System temperature detection

■ CPU/System fan speed detection

■ CPU/System fan speed control

■ 1x 64 Mb 󰘱ash

■ UEFI AMI BIOS

■ ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0

■ Military Class 4

■ OC Genie 4

■ CLICK BIOS 4

■ SBA(Small Business Advantage)

■ All Solid CAPs

■ PCI Express Gen 3

■ USB 3.0

■ SATA 6Gb/s

■ HDMI

■ Command Center

■ Live Update

■ M-Flash

■

■ MSI

■

Command Center

Super Charger

Super RAID

Live Update 5

Fast Boot

7-ZIP

■ Intel Turbo Boost Monitor

■ Intel Extreme Tuning Utility

■ Intel Small Business Advantage

■ Norton Internet Security Solution

■ Trend Micro SafeSync

■ Micro-ATX Form Factor

■

9.0 in. x 9.6 in. (22.8 cm x 24.4 cm)

■

Chapter 1

1-5 Getting Started

Connectors Quick Guide

Chapter 1

Back Panel

PCI_E2

PCI_E3

JTPM1

PCI1

JAUD1

JCOM1

JPWR1

JLPT1

SYSFAN2

CPU Socket

JUSB1

CPUFAN

JUSB2

JFP2

DIMM1

JFP1

DIMM3

DIMM2

SATA4

DIMM4

SATA3

SYSFAN1

JPWR2

JCI1PCI_E1 JBAT1

SATA2 SATA5_6

JUSB3

SATA1

1-6Getting Started

Connectors Reference Guide

Port Name Port Type Page

Back Panel 1-8

CPU Socket LGA1150 CPU Socket 1-1

CPUFAN,SYSFAN1~2 Fan Power Connectors 1-2

DIMM1~4 DDR3 Memory Slots 1-1

JAUD1 Front Panel Audio Connector 1-2

JBAT1 Clear CMOS Jumper 1-2

JCI1 Chassis Intrusion Connector 1-2

JCOM1 Serial Port Connector 1-2

JFP1, JFP2 System Panel Connectors 1-2

JLPT1 Parallel Port Connector 1-2

JPWR1~2 ATX Power Connectors 1-1

JTPM1 TPM Module Connector 1-2

JUSB1~2 USB 2.0 Expansion Connectors 1-2

JUSB3 USB 3.0 Expansion Connector 1-2

PCI_E1 PCIe x16 Expansion Slot 1-1

PCI_E2, PCI_E3 PCIe x1 Expansion Slots 1-1

PCI1 PCI Expansion Slot 1-1

SATA1~4 SATA 6Gb/s Connectors 1-1

SATA5~6 SATA 3Gb/s Connectors 1-1

Chapter 1

For the latest information about CPU, please visit http://www.msi.com/service/cpu-support/

For more information on compatible components, please visit http://www.msi.com/service/test-report/

1-7 Getting Started

Back Panel Quick Guide

PS/2 Mouse Port

Chapter 1

PS/2 Keyboard Port

PS/2 Keyboard/Mouse Port

▶ The PS/2® mouse/keyboard DIN connectors for a PS/2® mouse/keyboard.

USB 2.0 Port

▶ The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other

USB 2.0-compatible devices.

USB 3.0 Port

▶ USB 3.0 port is backward-compatible with USB 2.0 devices. It supports data transfer

rate up to 5 Gbit/s (SuperSpeed).

In order to use USB 3.0 devices, you must connect to a USB 3.0 port. If a USB cable is used, it must be USB 3.0 compliant.

HDMI Port

▶ The High-De󰘰nition Multimedia Interface (HDMI) is an all-digital audio-video interface

that is capable of transmitting uncompressed streams. HDMI supports all types of TV formats, including standard, enhanced, or high-de󰘰nition video, plus multi-channel digital audio on a single cable.

USB 2.0 Port

Important

HDMI

USB 3.0 Port

VGA Port

DVI-D Port

LAN Port

USB 2.0 Port

Line-In

Line-Out

Mic

VGA Port

▶ The DB15-pin female connector is provided for monitor.

DVI-D Port

▶ The DVI-D (Digital Visual Interface- Digital) connector can be connected to a LCD

monitor, or a CRT monitor with an adapter. To connect a monitor, please refer to the monitor’s manual for more information.

1-8Getting Started

Important

This platform supports dual-display and triple-display function.

HDMI+VGA VGA+DVI-D DVI-D+HDMI HDMI+VGA+DVI-D

Extend mode

(Extend the desktop to the

second and third monitor)

Clone mode

(Monitors have the same screen)

LAN Port

▶ The standard RJ-45 LAN jack is for connecting to a Local Area Network (LAN).

LINK/ACT

LED

Audio Ports

▶

SPEED

LED

These connectors are used for audio devices. The color of the jack refers to the function of the connector.

Blue-Line in: Used for connecting external audio outputting devices.

■ Green- Line out: Used as a connector for speakers or headphone.

■ Pink- Mic: Used as a connector for a microphone.

■

◯ ◯ ◯ ◯

LED LED Status Description

O󰘯 No link

Link/ Activity LED

Speed LED

Yellow Linked

Blinking Data activity

O󰘯 10 Mbps connection

Green 100 Mbps connection

Orange 1 Gbps connection

Chapter 1

2, 4, 6 or 8-channel audio-out con󰘰guration

Port 2-channel 4-channel 6-channel 8-channel

Blue Line in RS-Out RS-Out RS-Out

Green Line out FS-Out FS-Out FS-Out

Pink Mic Mic CS-Out CS-Out

Front audio - - - SS-Out

1-9 Getting Started

CPU (Central Processing Unit)

Introduction to the LGA 1150 CPU

The surface of the LGA 1150 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator.

Chapter 1

Overheating Overheating can seriously damage the CPU and motherboard. Always make sure the

cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.

Replacing the CPU When replacing the CPU, always turn o󰘯 the system’s power supply and unplug the

power supply’s power cord to ensure the safety of the CPU. Overclocking

This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product speci󰘰cations is not recommend. MSI does not guarantee the damages or risks caused by inadequate operation beyond product speci󰘰cations.

Notch

Important

Notch

Golden triangle is the Pin 1 indicator

1-10Getting Started

CPU & Heatsink Installation

When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and heatsink installation. Wrong installation can damage both the CPU and the motherboard.

Video Demonstration

Watch the video to learn how to install CPU & heatsink. at the address below.

http://youtu.be/bf5La099urI

1. Push the load lever down to unclip it and lift to the fully open position.

2. The load plate will automatically lift up as the load lever is pushed to the fully open position.

Load lever

Load plate

Chapter 1

Retention tab

Important

Do not touch the socket contacts or the bottom of the CPU.

1-11 Getting Started

3. Align the notches with the socket alignment keys. Lower the CPU straight down,

4. Close and slide the load plate under the retention knob. Close and engage the

Chapter 1

without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is properly seated in the socket.

load lever.

CPU notches

Alignment Key

Retention knob

5. When you press down the load lever the PnP cap will automatically pop up from the CPU socket. Do not discard the PnP cap. Always replace the PnP cap if the CPU is removed from the socket.

6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the CPU. This will help in heat dissipation and prevent CPU overheating.

PnP cap

Thermal paste

1-12Getting Started

7. Locate the CPU fan connector on the motherboard.

8. Place the heatsink on the motherboard with the fan’s cable facing towards the fan connector and the fasteners matching the holes on the motherboard.

CPU fan connector

9. Push down the heatsink until the four fasteners get wedged into the holes on the motherboard. Press the four fasteners down to fasten the heatsink. As each fastener locks into position a click should be heard.

10. Inspect the motherboard to ensure that the fastener-ends have been properly locked in place.

11. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.

Chapter 1

Motherboard

Fastener-end

Important

Con󰘰rm that the CPU heatsink has formed a tight seal with the CPU before booting

•

your system. Whenever the CPU is not installed, always protect the CPU socket pins by covering

•

the socket with the plastic cap. If you purchased a separate CPU and heatsink/ cooler, Please refer to the

•

documentation in the heatsink/ cooler package for more details about installation.

1-13 Getting Started

Memory

These DIMM slots are used for installing memory modules. For more information on compatible components, please visit http://www.msi.com/service/test-report/

Chapter 1

Watch the video to learn how to install memories at the address below.

http://youtu.be/76yLtJaKlCQ

Dual-Channel mode Population Rule

In Dual-Channel mode, the memory modules can transmit and receive data with two data bus channels simultaneously. Enabling Dual-Channel mode can enhance system performance. The following illustrations explain the population rules for Dual-Channel mode.

Video Demonstration

DIMM1

DIMM2

DIMM3

DIMM4

DIMM2

DIMM4

DIMM1

DIMM2

DIMM3

DIMM4

Important

DDR3 memory modules are not interchangeable with DDR2, and the DDR3

•

standard is not backward compatible. Always install DDR3 memory modules in DDR3 DIMM slots.

To ensure system stability, memory modules must be of the same type and density

•

in Dual-Channel mode. Due to chipset resource usage, the system will only detect up to 31+ GB of memory

•

(not full 32 GB) when all DIMM slots have 8GB memory modules installed.

1-14Getting Started

Mounting Screw Holes

When installing the motherboard, 󰘰rst install the necessary mounting stands required for an motherboard on the mounting plate in your computer case. If there is an I/O back plate that came with the computer case, please replace it with the I/O backplate that came with the motherboard package. The I/O backplate should snap easily into the computer case without the need for any screws. Align the mounting plate’s mounting stands with the screw holes on the motherboard and secure the motherboard with the screws provided with your computer case. The locations of the screw holes on the motherboard are shown below. For more information, please refer to the manual that came with the computer case.

The I/O ports should be facing

toward the rear of the computer

case. They should line up with the

holes on the I/O backplate.

Chapter 1

Important

Install the motherboard on a 󰘱at surface free from unnecessary debris.

•

To prevent damage to the motherboard, any contact between the motherboard

•

circuitry and the computer case, except for the mounting stands, is prohibited. Please make sure there are no loose metal components on the motherboard or

•

within the computer case that may cause a short circuit of the motherboard.

1-15 Getting Started

Power Supply

4. +1 2V

.G ro und

3. +1 2V

.G ro und

13 .+3 .3

1. +3. 3

14 .-1 2V

2. +3. 3

15 .Gr ou nd

.G rou nd

16 .PS -O N

4. +5 V

17 .Gr ou nd

.G rou nd

18 .Gr ou nd

6. +5 V

19 .Gr ou nd

.G rou nd

22 .+5

10 .+1 2V

20 .Re s

8. PW R O

23 .+5

.+ 12V

21 .+5

9. 5VS B

24 .Gr ou nd

12 .+3 .3

Watch the video to learn how to install power supply connectors.

http://youtu.be/gkDYyR_83I4

JPWR1~2: ATX Power Connectors

These connectors allow you to connect an ATX power supply. To connect the ATX power supply, align the power supply cable with the connector and 󰘰rmly press the cable into the connector. If done correctly, the clip on the power cable should be hooked on the motherboard’s power connector.

Chapter 1

Video Demonstration

JPWR1

JPWR2

Important

Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.

1-16Getting Started

Expansion Slots

This motherboard contains numerous slots for expansion cards, such as discrete graphics or audio cards.

PCI_E1~E3: PCIe Expansion Slots

The PCIe slot supports the PCIe interface expansion card.

PCIe 3.0 x16 Slot

PCIe 2.0 x1 Slot

PCI1: PCI Expansion Slot

The PCI slot supports additional LAN, SCSI, USB, and other add-on cards that comply with PCI speci󰘰cations.

Chapter 1

Important

When adding or removing expansion cards, always turn o󰘯 the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.

1-17 Getting Started

Video/ Graphics Cards

If available, this motherboard takes advantage of the CPU’s integrate graphics processor, but discrete video cards can be installed by way of the motherboard’s expansion slots. Adding on one or more discrete video cards will signi󰘰cantly boost the system’s graphics performance. For best compatibility, MSI graphics cards are recommended.

Watch the video to learn how to install a graphics card on PCIe x16 slot with butter󰘱y lock.

Chapter 1

http://youtu.be/mG0GZpr9w_A

Single Video Card Installation

Video Demonstration

Determine what type of expansion slot(s) the video card will use. Locate the expansion slot(s) on the motherboard. Remove any protective expansion slot covers from the computer case.

Line up the video card on top of the expansion slot(s) with the display ports facing out of the computer case.

Push the video card into its expansion slot(s). Depending on the expansion slot(s) used, there should be clip(s) on the expansion slot(s) that will lock in place.

If needed, screw the edge of the graphics card to the computer case. Some video cards might require a power cable directly from the power supply.

Please consult your video card’s manual for further instructions regarding driver installation or other special settings.

1-18Getting Started

Internal Connectors

SATA1~6: SATA Connectors

This connector is a high-speed SATA interface port. Each connector can connect to one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD/ DVD/ Blu-Ray).

Video Demonstration

Watch the video to learn how to Install SATA HDD.

http://youtu.be/RZsMpqxythc

SATA4

SATA2

SATA3

SATA1

SATA1~4 (6Gb/s) SATA5~6 (3Gb/s)

SATA6 SATA5

Important

Many SATA devices also need a power cable from the power supply. Such devices

•

include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD / Blu-Ray). Please refer to the device’s manual for further information.

Many computer cases also require that large SATA devices, such as HDDs, SSDs,

•

and optical drives, be screwed down into the case. Refer to the manual that came with your computer case or your SATA device for further installation instructions.

Please do not fold the SATA cable at a 90-degree angle. Data loss may result

•

during transmission otherwise. SATA cables have identical plugs on either sides of the cable. However, it is

•

recommended that the 󰘱at connector be connected to the motherboard for space saving purposes.

Chapter 1

1-19 Getting Started

CPUFAN,SYSFAN1~2: Fan Power Connectors

.Ground

2.Speed

ontrol

3.Sens

4.NC

.Ground

2.+12V

3.Sens

4.Speed

ontro

.G ro un d

2. +1 2V

3. No Us

The fan power connectors support system cooling fans with +12V. If the motherboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans. Some system fans may not connect to the motherboard and will instead connect to the power supply directly. A system fan can be plugged into any available system fan connector.

Chapter 1

CPUFAN

SYSFAN1

SYSFAN2

Important

Please refer to your processor’s o󰘲cial website or consult your vendor to 󰘰nd

•

recommended CPU heatsink. The CPUFAN and SYSFAN1 support Smart Fan Control with liner mode. The

•

Command Center utility can be installed to automatically control the fan speeds according to the CPU’s and system’s temperature.

If there are not enough ports on the motherboard to connect all system fans,

•

adapters are available to connect a fan directly to a power supply. Before 󰘰rst boot up, ensure that there are no cables impeding any fan blades.

•

1-20Getting Started

JFP1, JFP2: System Panel Connectors

1. +

10 .N o

Re se t

wi tc h

HD D

ow er

wi tc h

ow er

7. +

9. Re se rv e

6. +

2. +

.Ground

3.Suspend

5.Power

7.No Pi

8. +

4. +

Buzz er

Spea ke r

These connectors connect to the front panel switches and LEDs. The JFP1 connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. When installing the front panel connectors, please use the optional M-Connector to simplify installation. Plug all the wires from the computer case into the M-Connector and then plug the M-Connector into the motherboard.

Video Demonstration

Watch the video to learn how to Install front panel connectors.

http://youtu.be/DPELIdVNZUI

JFP2

Chapter 1

JFP1

Important

On the connectors coming from the case, pins marked by small triangles are

•

positive wires. Please use the diagrams above and the writing on the optional MConnectors to determine correct connector orientation and placement.

The majority of the computer case’s front panel connectors will primarily be plugged

•

into JFP1.

1-21 Getting Started

JUSB1~2: USB 2.0 Expansion Connector

SB3 _T X_C _D N

.Gr ou nd

3.U SB 3_R X_ DP

2.U SB 3_R X_ DN

1.P ow er

10. Gr oun d

USB 2. 0

SB2 .0

.Gr ou nd

6.U SB 3_T X_ C_D P

20. No

19. Po wer

18. US B3_ RX _DN

17. US B3_ RX _DP

16. Gr oun d

15. US B3_ TX _C_ DN

14. US B3_ TX _C_ DP

13. Gr oun d

12. US B2. 0

. +

USB 2. 0

This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others.

Chapter 1

Note that the VCC and GND pins must be connected correctly to avoid possible damage.

JUSB3: USB 3.0 Expansion Connector

The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data transfer rates up to 5Gbits/s (SuperSpeed).

Important

Note that the VCC and GND pins must be connected correctly to avoid possible

•

damage. To use a USB 3.0 device, you must connect the device to a USB 3.0 port through

•

an optional USB 3.0 compliant cable.

1-22Getting Started

JCI1: Chassis Intrusion Connector

1.MI C L

3.MI C R

10.Head

hone

Detection

5.Head P

hone

7.SENSE_SEN

9.Head P

hone

8.No Pi

6.MI C D

etection

4.NC

.Ground

This connector connects to the chassis intrusion switch cable. If the computer case is opened, the chassis intrusion mechanism will be activated. The system will record this intrusion and a warning message will 󰘱ash on screen. To clear the warning, you must enter the BIOS utility and clear the record.

JAUD1: Front Panel Audio Connector

This connector allows you to connect the front audio panel located on your computer case. This connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide.

Chapter 1

1-23 Getting Started

JTPM1: TPM Module Connector

This connector connects to a optional TPM (Trusted Platform Module) Module. Please refer to the TPM security platform manual for more details and usages.

Chapter 1

JLPT1: Parallel Port Connector

This connector is used to connect an optional parallel port bracket. The parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode.

1-24Getting Started

JCOM1: Serial Port Connector

This connector is a 16550A high speed communication port that sends/receives 16 bytes FIFOs. You can attach a serial device.

Jumper

JBAT1: Clear CMOS Jumper

There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system con󰘰guration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system con󰘰guration, set the jumpers to clear the CMOS RAM.

Chapter 1

1 1

Keep Data Clear Data

Important

You can clear the CMOS RAM by shorting this jumper while the system is o󰘯. Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on because it will damage the motherboard.

1-25 Getting Started

Drivers and Utilities

After you install the operating system you will need to install drivers to maximize the performance of the new computer you just built. MSI motherboard comes with a Driver Disc. Drivers allow the computer to utilize your motherboard more e󰘲ciently and take advantage of any special features we provide.

You can protect your computer from viruses by installing the bundled security program. The bundle also includes a variety of powerful and creative utilities.

Total Installer

Chapter 1

Total Installer is very easy to use and does a great job of 󰘰nding necessary drivers. Please follow the steps below to install drivers and utilities for your new computer.

Insert MSI Driver Disc into the optical drive. The setup screen will automatically appear if autorun is enabled in OS.

Click Total Installer. A popup dialogue will appear listing all necessary drivers.

Click here

Select all checkbox on driver listing dialog.

3. Click Install button.

4. The software installation will then be in progress, after it has 󰘰nished it will prompt

5. you to restart.

Click OK button to 󰘰nish.

6. Restart your computer.

You can also use the same method to install the utilities.

1-26Getting Started

Chapter 2

Quick Installation

This chapter provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code.

Important

The diagrams in this chapter are for reference only and may vary from the product you purchased.

CPU Installation

http://youtu.be/bf5La099urI

Chapter 2

2-2Quick Installation

Chapter 2

2-3 Quick Installation

Memory Installation

http://youtu.be/76yLtJaKlCQ

Chapter 2

2-4Quick Installation

Motherboard Installation

Chapter 2

2-5 Quick Installation

Chapter 2

2-6Quick Installation

Power Connectors Installation

688

I MC

688

I MC

E688

688

I MC

E688

688

E688

I MC

688 MS

http://youtu.be/gkDYyR_83I4

Chapter 2

2-7 Quick Installation

Chapter 2

E688

688

I MC

E688

688

I MC

E688

688

I MC

E688

688

I MC

E688

2-8Quick Installation

SATA HDD Installation

E688

I MC

688

I MC

688 MS

I MC

688

E688

I MC

E688 MS

I MC

E688

688

E688

I MC

http://youtu.be/RZsMpqxythc

Chapter 2

2-9 Quick Installation

mSATA SSD Installation

Chapter 2

2-10Quick Installation

E688

I MC

688

I MC

688

I MC

688

E688 MS

I MC4

E688

I MC

E688

688

I MC

E688

I MC

688 MS

I MC

E688

I MC

E688

I MC

688

I MC

688

I MC

688

I MC

HD_ LED+

HD_ LED-

RST _SW-

RST _SW+

RSV D_DN U

HD_LED+

HD_LED-

RST_SW-

RST_SW+

RSVD_DNU

PWR_S

W-

PWR_SW+

FP P WR /S L

PWR/SL

H.D .D.

RES T

OWE

Front Panel Connector Installation

JFP1 Connecotr Installation

http://youtu.be/DPELIdVNZUI

Front Panel Audio Connector Installation

Chapter 2

2-11 Quick Installation

E688

I MC

688 MS

E688 MS

I MC4

E688

I MC

E688

I MC4

688 MS

688

I MC

E688

I MC

E688

I MC

E688

I MC4

688

I MC

E688

I MC

E68

I MC

E688

I MC4

E688

I MC

E688

I MC4

688 MS

I MC4

E688

688 MS

I MC4

E688

Peripheral Connector Installation

USB2.0 Connector Installation

Chapter 2

USB3.0 Connector Installation

2-12Quick Installation

Graphics Card Installation

http://youtu.be/mG0GZpr9w_A

Chapter 2

2-13 Quick Installation

Chapter 2

2-14Quick Installation

Chapter 3

BIOS Setup

CLICK BIOS is a revolutionary UEFI interface that allows you to setup and con󰘰gure your system for optimum use. Using your mouse and keyboard, users can change BIOS settings, monitor CPU temperature, select the boot device priority and view system information such as the CPU name, DRAM capacity, the OS version and the BIOS version. Users can import and export parameter data for backup or for sharing with friends.

Important

The items under each BIOS category described in this chapter are

•

under continuous update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be held for reference only.

The pictures in this chpater are for reference only and may vary from the

•

product you purchased. Please refer to the actual screens of your system for detailed information.

Please clear the CMOS data and restore the default settings if the system

•

becomes unbootable after changing BIOS settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, select the "Restore Defaults" and press <Enter> in BIOS to load the default settings.)

Entering Setup

The default settings offer the optimal performance for system stability in normal conditions. You may need to run the Setup program when:

Please clear the CMOS data and restore the default settings if the system becomes

•

unbootable after changing BIOS settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, select the "Restore Defaults" and press <Enter> in BIOS to load the default settings.)

If you are unfamiliar with the BIOS settings, we recommend that you keep the

•

default settings to avoid possible system damage or failure booting due to inappropriate BIOS configuration.

Entering BIOS Setup

Power on the computer and the system will start the Power On Self Test (POST) process. When the message below appears on the screen, please <DEL> key to enter BIOS:

If the message disappears before you respond and you still need to enter BIOS, restart the system by turning the computer OFF then back ON or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

MSI additionally provides two methods to enter the BIOS setup. You can click the “GO2BIOS” tab on “MSI Fast Boot” utility screen or press the physical “GO2BIOS"

Chapter 3

button (optional) on the motherboard to enable the system going to BIOS setup directly at next boot.

An error message appears on the screen during the system booting up, and

■

requests you to run SETUP. You want to change the default settings for customized features.

■

Important

Press DEL key to enter Setup Menu, F11 to enter Boot Menu

Click "GO2BIOS" tab on "MSI Fast Boot" utility screen.

Important

Please be sure to install the “MSI Fast Boot” utility before using it to enter the BIOS setup.

3-2BIOS Setup 3-3 BIOS Setup

Overview

After entering BIOS, the following screen is displayed.

Temperature monitor

Model

name

Virtual OC

Genie Button

BIOS menu

selection

Menu display

Temperature monitor

▶ Show the temperatures of the processor and the motherboard.

Language

▶ Allows you to select the language of the BIOS setup.

System information

▶ Shows the time, date, CPU name, CPU frequency, DRAM frequency, DRAM capacity

and the BIOS version.

BIOS menu selection

▶ The following options are available:

SETTINGS - Uses this menu to specify the parameters for chipset and boot

■

devices. OC - This menu contains the frequency and voltage adjustments. Increasing

■

the frequency can get better performance, however high frequency and heat can cause instability, we do not recommend general users to overclock.

M-FLASH - This menu provides the way to update BIOS with a USB flash

■

disk. OC PROFILE -This menu is used to set various overclocking profiles.

■

HARDWARE MONITOR - This menu is used to set the speeds of fans and

■

monitors voltages of system. BOARD EXPLORER - It will provide the information of the installed devices on

■

the motherboard.

Language

System

information

Boot device

priority bar

BIOS menu

selection

Chapter 3

3-5

BIOS Setup

Boot device priority bar

▶ You can move the device icons to change the boot priority.

Menu display

▶ This area provides BIOS settings and information to be configured.

Virtual OC Genie Button

▶ Enables or disables the OC Genie function by clicking on this button. When enabled,

this button will be light. Enabling OC Genie function can automatically overclock with MSI optimized overclocking profile.

We recommend that you do not to make any modification in OC menu and do not to load defaults after enabling the OC Genie function.

Model Name

▶ Shows the model name of motherboard.

Chapter 3

Important

High priority Low priority

General Help

Sub-Menu Scroll bar

Sub-menu

▶ If you find a point symbol to the left of certain items, that means a sub-menu can be

launched for additional options. You can use the arrow keys or mouse to highlight the item and press <Enter> or double-click the left mouse button to enter the sub-menu.

Scroll bar

▶ Slide the scroll bar or use the arrow keys to display the other items that are available

on the "menu display" area.

General Help

▶ The General Help displays a brief description to assist you in grasping the selected

item.

BIOS Setup

3-4

3-5

BIOS Setup

Operation

You can control BIOS settings with the mouse and the keyboard. The following table lists and describes the hot keys and the mouse operations.

Hot key Mouse Description <↑↓→← >

Select Item

Move the cursor

<Enter>

Click/ Double-click the left button

<Esc>

Click the right button <+> Increase the numeric value or make changes <-> Decrease the numeric value or make changes <F1> General Help <F4> CPU Specifications <F5> Enter Memory-Z <F6> Load optimized defaults <F8> OC Profile Load From USB <F9> OC Profile Save to USB <F10> Save Change and Reset <F12> Save a screenshot to a FAT/FAT32 USB drive

Select Icon/ Field

Jump to the Exit menu or return to the previous from a submenu

3-5

BIOS Setup

Chapter 3

SETTINGS

System Status

System Date

▶ Sets the system date. Use tab key to switch between date elements. The format is <day> <month> <date> <year>. <day> Day of the week, from Sun to Sat, determined by BIOS. Read-only. <month> The month from Jan. through Dec. <date> The date from 1 to 31 can be keyed by numeric function keys. <year> The year can be adjusted by users.

System Time

▶ Sets the system time. Use tab key to switch between time elements.

Chapter 3

The time format is <hour> <minute> <second>.

SATA Port

▶ Shows the information of connected SATA device.

Important

If the connected SATA device is not displayed, turn off computer and re-check SATA cable and power cable connections of the device and motherboard.

System Information

▶ Shows detailed system information, including CPU type, BIOS version, and Memory

(read only).

3-6BIOS Setup 3-7 BIOS Setup

Advanced

PCI Subsystem Settings

▶ Sets PCI, PCI express interface protocol and latency timer. Press <Enter> to enter the

sub-menu.

PEG0 - Gen X [Auto]

▶

Sets PCI Express protocol for matching different installed devices. [Auto] Enables all PCIe Gen1, Gen2 and Gen3. supports. [Gen1] Enables PCIe Gen1 support only. [Gen2] Enables PCIe Gen2 support only. [Gen3] Enables PCIe Gen3 support only.

PCI Latency Timer [32]

▶

Sets latency timer of PCI interface device.

[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]

ACPI Settings

▶ Sets ACPI parameters of onboard power LED behaviors. Press <Enter> to enter the

sub-menu.

Power LED [Blinking]

▶

Sets shining behaviors of the onboard Power LED. [Dual Color] The power LED turns to another color to indicate the S3 state. [Blinking] The power LED blinks to indicate the S3 state.

Integrated Peripherals

▶ Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press

<Enter> to enter the sub-menu.

Onboard LAN Controller [Enabled]

▶

Enables or disables the onboard LAN controller.

LAN Option ROM [Disabled]

▶

Enables or disables the legacy network Boot Option ROM for detailed settings.

This item will appear when "Onboard LAN Controller" is enabled. [Enabled] Enables the onboard LAN Boot ROM. [Disabled] Disables the onboard LAN Boot ROM.

Network Stack [Disabled]

▶

Sets UEFI network stack for optimizing IPv4 / IPv6 function. [Enabled] Enables UEFI network stack. [Disabled] Disables UEFI network stack.

Ipv4 PXE Support [Enabled]

▶

When “Enabled”, the system UEFI network stack will support Ipv4 protocol. This

item will appear when “Network Stack” is enabled. [Enabled] Enables the Ipv4 PXE boot support. [Disabled] Disables the Ipv4 PXE boot support.

Chapter 3

Integrated Graphics Configuration

▶ Adjusts integrated graphics settings for optimum system. Press <Enter> to enter the

sub-menu.

Chapter 3

Ipv6 PXE Support [Enabled]

▶

When “Enabled”, the system UEFI network stack will support Ipv6 protocol. This

item will appear when “Network Stack” is enabled. [Enabled] Enables the Ipv6 PXE boot support. [Disabled] Disables the Ipv6 PXE boot support.

SATA Mode [AHCI Mode]

▶

Sets the operation mode of the onboard SATA controller. The default mode is

AHCI. [Disabled] Disables the SATA function. [IDE Mode] Specify the IDE mode for SATA storage devices. [AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced

SATA1~6 Hot Plug [Disabled]

▶

Allows user to enable or disable the SATA hot plug support. This item will appear

when the “SATA Mode” set to [AHCI]/ [RAID]. [Enabled] Enables hot plug support for the SATA ports. [Disabled] Disables hot plug support for the SATA ports.

HD Audio Controller [Enabled]

▶

Enables or disables the onboard High Definition Audio controller.

HPET [Enabled]

▶

Enables or disables the HPET (High Precision Event Timers) support.

Initiate Graphic Adapter [PEG]

▶

Selects a graphics device as the primary boot device. [IGD] Integrated Graphics Display. [PEG] PCI-Express Graphics Device.

Integrated Graphics Share Memory [64M]

▶

Selects a fixed amount of system memory allocated to the onboard graphics. This

item defines the exact memory size shared to the onboard graphics. [Options: 32M,

64M, 128M, 256M]

DVMT Memory [256MB]

▶

DVMT memory can dynamically allocate system memory for running graphics-

intensive applications, such as 2D/3D games. [Options: 128MB, 256MB, Maximum]

IGD Multi-Monitor [Disabled]

▶

Enables or disables the multi-screen output from integrated graphics and external

graphics card. For motherboard with Lucid Virtu MVP Technology support, please

enable this item to support this function. [Enabled] Enables IGD multi-screen function. [Disabled] Disables IGD multi-screen function.

Host Controller Interface) offers some advanced features to enhance the speed and performance of SATA storage device, such as Native Command Queuing (NCQ) and hot-plugging.

3-8BIOS Setup 3-9 BIOS Setup

Intel(R) Rapid Start Technology

▶ Sets Intel® Rapid Start Technology for optimizing the system resume operation. Press

<Enter> to enter the sub-menu.

Intel(R) Rapid Start Technology [Disabled]

▶

Intel® Rapid Start Technology lets the system resume from sleep mode quickly.

This function is available when an SSD is installed. [Enabled] Enables Intel Rapid Start Technology. [Disabled] Disables Intel Rapid Start Technology.

Entry on S3 RTC Wake [Enabled]

▶

Enables or disables to support S3 RTC wake up with Intel Rapid Start Technology.

This item will appear when “Intel(R) Rapid Start Technology” is enabled. [Enabled] Allows the system to enter the sleep mode with Intel Rapid Start

[Disabled] Disables this function.

Entry After [10 minutes]

▶ Sets a timer for system to enter the sleep mode with Intel Rapid Start

Technology. This item will appear when “Intel(R) Rapid Start Technology” is enabled. [Options: 1 minute ~ 120 minutes]

Active Page Threshold Support [Enabled]

▶

Enables or disables to support Active Page Threshold when the Rapid Start

partition size is less than the system DRAM size. [Enabled] Enables the additional partition size of SSD for iRST. [Disabled] Disables this function.

Active Memory Threshold

▶

Sets Rapid Start partition size for Active Page Threshold. This item will appear

when “Active Page Threshold Support” is enabled.

Technology.

Important

The partition size must be larger then the amount of memory.

Hybrid Hard Disk Support [Disabled]

▶

Enables or disables the Intel Rapid Start Technology to support hybrid hard disk

drive. [Enabled] Enables hybrid hard disk support. [Disabled] Disables hybrid hard disk support.

RapidStart Display Save/Restore [Enabled]

▶

Enables or disables the Intel Rapid Start Display screen to be saved or restored.

The screen will be saved before the system enters sleep mode. Then the system

will restore the screen when wakened. [Enabled] Enables this function. [Disabled] Disables this function.

RapidStart Display Type [BIOS Save/Restore]

▶

Selects the screen type of Intel Rapid Start Display. [BIOS Save/Restore] The BIOS POST splash screen will be saved/ restored. [DeskTop Save/Restore] The desktop image will be saved/ restored.

Chapter 3

USB Configuration

▶ Sets the onboard USB controller and device function. Press <Enter> to enter the sub-

menu.

Super IO Configuration

▶ Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter>

to enter the sub-menu.

Chapter 3

LakeTiny Feature [Disabled]

▶

Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears

when a installed CPU supports this function and "Intel C-State" is enabled. [Enabled] Enhance the dynamic IO load adjusted performance for accelerating

[Disabled] Disables this feature.

USB Controller [Enabled]

▶

Enables or disables the onboard USB controller.

Legacy USB Support [Enabled]

▶

Sets Legacy USB function support. [Auto] The system will automatically detect if any USB device is connected

[Enabled] Enable the USB support for legacy operating systems that do not

[Disabled] The USB devices are available only for UEFI applications.

Serial (COM) Port 0 Configuration

▶

Sets detailed configuration of serial(COM) port 0. Press <Enter> to enter the sub-

menu.

Serial (COM) Port 0 [Enabled]

▶ Enables or disables serial (COM) port 0.

Serial (COM) Port 0 Settings [Auto]

▶ Sets serial port 0 (COM). If set to "Auto", BIOS will optimize the IRQ

automatically or you can set it manually.

Parallel (LPT) Port Configuration

▶

Sets detailed configuration of parallel port (LPT). Press <Enter> to enter the sub-

menu.

Parallel (LPT) Port [Enabled]

▶ Enables or disables parallel(LPT) port.

Parallel (LPT) Port Settings [Auto]

▶ Sets parallel port (LPT). If set to "Auto", BIOS will optimize the IRQ

automatically or you can set it manually.

the SSD speed.

and enables or disables the legacy USB support.

support USB.

3-10BIOS Setup 3-11 BIOS Setup

Device Mode [Printer Mode]

▶ Selects an operating mode for parallel port. [Printer Mode] Printer port mode [SPP] Standard Parallel Port mode [EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard

[ECP] Extended Capability Port mode [ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel

Intel(R) Smart Connect Configuration

▶ Sets Intel Smart Connect Technology for optimizing system network performance in

sleep mode. Press <Enter> to enter the sub-menu.

Intel(R) Smart Connect Technology [Enabled]

▶

Enables or disables Intel(R) Smart Connect Technology. This feature can update

applications (ex. email and social networks) by periodically waking your system

from sleep mode. And you do not need to wait for the applications to update when

you wake up the system. [Enabled] Enables Intel smart connect technology. [Disabled] Disables Intel smart connect technology.

Power Management Setup

▶ Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press

<Enter> to enter the sub-menu.

EuP 2013 [Disabled]

▶

Enables or disables the system power consumption according to EuP2013

regulation. [Enabled] Optimize the system power consumption according to EuP 2013

[Disabled] Disables this function.

Note: When enabled, the system will not support RTC wake up event functions.

Restore after AC Power Loss [Power Off]

▶

Sets the system behaviors while encountering the AC power loss. [Power Off] Leaves the system in power off state after restoring AC power. [Power On] Boot up the system after restoring AC power. [Last State] Restores the system to the previous state (power on/ power off)

Windows 8 Configuration

▶ Sets Windows 8 detailed configuration and behaviors. Press <Enter> to enter the sub-

menu.

Windows 8 Feature [Disabled]

▶

Enables the supports for Windows 8 or disables for other operating systems.

Before enabling this item, make sure all installed devices & utilities (hardware &

software) should meet the Windows 8 requirements. [Enabled] The system will switch to UEFI mode to meet the Windows 8

[Disabled] Disables this function.

Parallel Port mode.

Port-1.9/ 1.7 mode.

regulation.

before AC power loss.

requirement.

Chapter 3

If you want to enter BIOS with enabled “MSI Fast Boot” mode or enabled "Fast Boot" mode, you have to click the "GO2BIOS" tab on MSI Fast Boot utility screen or press the "GO2BIOS" button (optional) on the motherboard. And then the system will enter to BIOS setup directly at next boot.

Chapter 3

MSI Fast Boot [Disabled]

▶

MSI Fast Boot is the fastest way to boot the system. It will disable more devices to

speed up system boot time which is faster than the boot time of “Fast Boot”. [Enabled] Enables the MSI Fast Boot function to speed up booting time. And

[Disabled] Disables MSI Fast Boot.

Fast Boot [Enabled for Windows 8, Disabled for other OS]

▶

Enables or disables the Windows 8 fast boot feature. This item will only be

available when "MSI Fast Boot" is disabled. [Enabled] Enables the Fast Boot configuration to accelerate system boot time. [Disabled] Disables the Fast Boot configuration.

the following "Fast Boot" will be disabled and fixed.

Important

Internal GOP Configuration

▶

Manages the onboard Graphics Output Protocol (GOP). Press <Enter> to enter

the sub-menu. This menu shows the iGFX Driver version for system information

management. This sub-menu will appear when “Windows 8 Feature” is enabled.

Secure Boot

▶

Sets the Windows secure boot to prevent the unauthorized accessing. Press

<Enter> to enter the sub-menu. This sub-menu will appear when “Windows 8

Feature” is enabled.

Secure Boot Control [Disabled]

▶ Enables or disables secure boot. [Enabled] Enables the secure boot function and allow you to set the secure

[Disabled] Disables this function.

Secure Boot Mode [Standard]

▶ Selects the secure boot mode. This item is to select how the secure boot keys

be loaded. This item appears when "Secure Boot" is enabled. [Standard] The system will automatically load the secure keys from BIOS. [Custom] Allows user to configure the secure boot settings and manually

Image Execution Policy

▶ Sets the policy when the system image execution policy on Security Violation.

Press <Enter> to enter the sub-menu. This sub-menu will appear when “Secure Boot Mode” sets to [Custom].

Key Management

▶ Manages the secure boot keys. Press <Enter> to enter the sub-menu. This sub-

menu will appear when “Secure Boot Mode” sets to [Custom].

boot settings.

load the secure keys.

3-12BIOS Setup 3-13 BIOS Setup

Wake Up Event Setup

▶ Sets system wake up behaviors for different sleep modes. Press <Enter> to enter the

sub-menu.

Wake Up Event By [BIOS]

▶

Selects the wake up event by BIOS or operating system. [BIOS] Activates the following items, and use these items to set the wake up

[OS] The wake up events will be defined by OS.

Resume By RTC Alarm [Disabled]

▶ Disables or enables the system wake up by RTC Alarm. [Enabled] Enables the system to boot up on a scheduled time/ date. [Disabled] Disables this function.

Date (of month) Alarm/ Time (hh:mm:ss) Alarm

▶

Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the

system will automatically resume (boot up) on a specified date/hour/minute/second

in these fields (using the <+> and <-> to select the date & time settings).

Resume By PCI or PCI-E Device [Disabled]

▶

Disables or enables the system wake up by PCI or PCI express device. [Enabled] Enables the system to be awakened from the power saving modes

[Disabled] Disables this function.

Resume From S3 by USB Device [Disabled]

▶

Disables or enables the system wake up by USB devices. [Enabled] Enables the system to be awakened from S3 (Suspend to RAM)

[Disabled] Disables this function.

Resume From S3/S4/S5 by PS/2 Mouse [Disabled]

▶

Disables or enables the system wake up by PS/2 mouse. [Enabled] Enables the system to be awakened from S3/ S4/ S5 state when

[Disabled] Disables this function.

Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]

▶ Disables or enables the system wake up by PS/2 keyboard. [Any Key] Enables the system to be awakened from S3/ S4/ S5 state when

[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when

[Disabled] Disables this function.

Realtek PCIe GBE Family Controller

▶ Shows driver information and configures ethernet controller parameter. Press <Enter>

to enter the sub-menu.

events.

when activity or input signal of PCI/ PCIe device is detected.

sleep state when activity of USB device is detected.

activity of PS/2 mouse is detected.

activity of any key on PS/2 keyboard is detected.

activity of hot key on PS/2 keyboard is detected.

Chapter 3

Boot

Sets the sequence of system boot devices.

Full Screen Logo Display [Enabled]

▶ Enables or disables to show the full screen logo while system POST. [Enabled] The OS boots straight to the GUI without showing the POST screen. [Disabled] Shows the POST messages at booting.

GO2BIOS [Disabled]

▶ Enables or disables the system to power on and go to the BIOS setup directly by long

pressing the power button about 2~4 seconds when the system is off. [Enabled] The system boots straight to the BIOS setup by long pressing the power

[Disabled] Disables this function.

Boot Mode Select [LEGACY+UEFI]

▶ Sets the system boot mode from legacy or UEFI architecture depending on OS

installation requirement. [UEFI] Enables UEFI BIOS boot mode support only. [LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot

FIXED BOOT ORDER Priorities

▶ Sets device priority for system boot.

Boot Option #1~N

▶ These items are used to prioritize the installed boot devices.

Security

Administrator Password

▶ Sets administrator password for system security. Enters the administrator password if

set; user has full rights to change the BIOS items.

User Password

▶ Sets User Password for system security. Enters the user password if set; but user

might have limited rights to change the BIOS items.

Chapter 3

button about 2~4 seconds when the system is off.

mode.

Important

When selecting the Administrator / User Password items, a password box will appear on the screen. Type the password then press <Enter>. The password typed now will replace any previous set password from CMOS memory. You will be prompted to confirm the password. You may also press <Esc> to abort the selection.

To clear a set password, press <Enter> when you are prompted to enter a new password. A message will confirm the password is being disabled. Once the password is disabled, you can enter the setup and OS without authorization.

U-Key [Disabled]

▶ Enables or disables U-Key as user's password to access the system.

3-14BIOS Setup 3-15 BIOS Setup

Make U-Key at

▶ Makes a key at the USB flash drive to prevent other people from accessing the

system. Only the user who has the key with the flash drive can access the system.

Chassis Intrusion Configuration

▶ Press <Enter> to enter the sub-menu.

Chassis Intrusion [Disabled]

▶

This function will be available if the chassis equips a chassis intrusion switch.

Once the chassis is opened, the system will record and issue a warning message.

To clear the warning message, set the item to [Reset], then it will return to

[Enabled] later. [Options: Disabled, Enabled, Reset]

Save & Exit

Discard Changes and Exit

▶ Exit BIOS setup without saving any change. This it is used to abandon all changes

and exit BIOS setup.

Save Changes and Reboot

▶ This item is used to save all changes and reboot the system.

Save Changes

▶ This item is used to save current changes.

Discard Changes

▶ This item is used to discard current all changes and restore to the previous values.

Restore Defaults

▶ This item is used to restore/ load all default values by the BIOS vendor.

Boot Override

▶ The installed boot-able devices will appear on this menu, you can select one of them

be a boot device to start booting.

Chapter 3

Important

Overclocking your PC manually is only recommended for advanced users.

•

Overclocking is not guaranteed, and if done improperly, can void your warranty or

•

severely damage your hardware. If you are unfamiliar with overclocking, we advise you to use OC Genie for easy

•

overclocking.

Current CPU/ DRAM/ Ring Frequency

▶ These items show the current frequencies of installed CPU, Memory and Ring. Read-

only.

Chapter 3

Adjust CPU Ratio [Auto]

▶ Sets the CPU ratio that is used to determine CPU clock speed. This item can only be

changed if the processor supports this function.

Adjusted CPU Frequency

▶ Shows the adjusted CPU frequency. Read-only.

EIST [Enabled]

▶ Enables or disables the Enhanced Intel® SpeedStep Technology. This item will be

available when "Adjust CPU Ratio" is set to [Auto]. [Enabled] Enables the EIST to adjust CPU voltage and core frequency

[Disabled] Disables EIST.

dynamically. It can decrease average power consumption and average heat production.

3-16BIOS Setup 3-17 BIOS Setup

Intel Turbo Boost [Enabled]

▶ Enables or disables the Intel® Turbo Boost. This item appears when the installed CPU

supports this function. [Enabled] Enables this function to boost CPU performance automatically above

[Disabled] Disables this function.

Adjust Ring Ratio [Auto]

▶ Sets the ring ratio. The valid value range depends on the installed CPU.

Adjusted Ring Frequency

▶ Shows the adjusted Ring frequency. Read-only.

Adjust GT Ratio [Auto]

▶ Sets the integrated graphics ratio. The valid value range depends on the installed

CPU.

Adjusted GT Frequency

▶ Shows the adjusted integrated graphics frequency. Read-only.

DRAM Reference Clock [Auto]

▶ Sets the DRAM reference clock. The valid value range depends on the installed CPU. This item appears when a CPU that supports this adjustment is installed.

DRAM Frequency [Auto]

▶ Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.

Adjusted DRAM Frequency

▶ Shows the adjusted DRAM frequency. Read-only.

Extreme Memory Profile (X.M.P) [Disabled]

▶ X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.

This item will be available when you install the memory modules that support X.M.P. technology.

[Disabled] Disables this function. [Profile 1] Uses profile1 over-clocking settings of installed XMP memory module. [Profile 2] Uses profile2 over-clocking settings of installed XMP memory module.

DRAM Timing Mode [Auto]

▶ Selects the memory timing mode. [Auto] DRAM timings will be determined based on SPD (Serial Presence

[Link] Allows user to configure the DRAM timing manually for all memory

[UnLink] Allows user to configure the DRAM timing manually for respective

Advanced DRAM Configuration

▶ Press <Enter> to enter the sub-menu. This sub-menu will be activated after setting

[Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each memory channel. The system may become unstable or unbootable after changing memory timing. If it occurs, please clear the CMOS data and restore the default settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to load the default settings.)

rated specifications when system request the highest performance state.

Detect) of installed memory modules.

channel.

memory channel.

Chapter 3

DRAM Training Configuration

▶ Press <Enter> to enter the sub-menu. Enables or disables the various training ways of

DRAM. The system may become unstable or unbootable after changing these items in this sub-menu. If it occurs, please clear the CMOS data and restore the default settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to load the default settings.)

Memory Fast Boot [Auto]

▶ Enables or disables the initiation and training for memory every booting. [Auto] This setting will be configured automatically by BIOS. [Enabled] Memory will completely imitate the archive of first initiation and first

[Disabled] The memory will be initialed and trained every booting.

VCCIN Voltage [Auto]

▶ Sets the CPU input voltage. The CPU input voltage is the CPU power source that is

shared with components of the CPU.

Current VCCIN Voltage

▶ Shows current CPU VCCIN voltage. Read-only.

CPU Core Voltage Mode

▶ Selects the control modes for CPU Core voltage. [Auto] This setting will be configured automatically by BIOS. [Adaptive Mode] Sets adaptive voltage automatically for optimizing the system

[Override Mode] Allows you to set this voltages manually.

CPU Core Voltage [Auto]

▶ Sets CPU core voltage. If set to "Auto", BIOS will set the voltages automatically or

you can set it manually.

Current CPU Core Voltage

▶ Shows the current CPU core voltage. Read-only.

DRAM Voltage [Auto]

▶

Chapter 3

Sets the memory voltage. If set to "Auto", BIOS will set memory voltage automatically or you can set it manually.

Current DRAM Voltage

▶ Shows current memory voltage. Read only.

CPU Memory Changed Detect [Enabled]

▶ Enables or disables the system to issue a warning message during boot when the

CPU or memory has been replaced. [Enabled] The system will issue a warning message during boot and than needs

[Disabled] Disables this function and keeps the current BIOS settings.

training. After that, the memory will not be initialed and trained when booting to accelerate the system booting time.

performance.

to load the default settings for new devices.

3-18BIOS Setup 3-19 BIOS Setup

CPU Specifications

▶ Press <Enter> to enter the sub-menu. This sub-menu displays the information of

installed CPU. You can also access this information menu at any time by pressing [F4]. Read only.

CPU Technology Support

▶

Press <Enter> to enter the sub-menu. The sub-menu shows what the key features

does the installed CPU support. Read only.

MEMORY-Z

▶ Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and

timings of installed memory. You can also access this information menu at any time by pressing [F5].

DIMM1~4 Memory SPD

▶

Press <Enter> to enter the sub-menu. The sub-menu displays the information of

installed memory. Read only.

CPU Features

▶ Press <Enter> to enter the sub-menu.

Hyper-Threading Technology [Enabled]

▶

The processor uses Hyper-Threading technology to increase transaction rates

and reduces end-user response times. Intel Hyper-Threading technology treats

the multi cores inside the processor as multi logical processors that can execute

instructions simultaneously. In this way, the system performance is highly

improved. [Enable] Enables Intel Hyper-Threading technology. [Disabled] Disables this item if the system does not support HT function.

Active Processor Cores [All]

▶

This item allows you to select the number of active processor cores.

Limit CPUID Maximum [Disabled]

▶

Enables or disables the extended CPUID value. [Enabled] BIOS will limit the maximum CPUID input value to circumvent

[Disabled] Use the actual maximum CPUID input value.

Execute Disable Bit [Enabled]

▶

Intel’s Execute Disable Bit functionality can prevent certain classes of malicious

“buffer overflow” attacks where worms attempt to execute code to damage the

system. It is recommended that keeps this item enabled always. [Enabled] Enables NO-Execution protection to prevent the malicious attacks

[Disabled] Disables this function.

Intel Virtualization Tech [Enabled]

▶ Enables or disables Intel Virtualization technology. [Enabled] Enables Intel Virtualization technology and allows a platform to run

[Disabled] Disables this function.

boot problems with older operating system that do not support the processor with extended CPUID value.

and worms.

multiple operating systems in independent partitions. The system can function as multiple systems virtually.

Chapter 3

Hardware Prefetcher [Enabled]

▶

Enables or disables the hardware prefetcher (MLC Streamer prefetcher). [Enabled] Allows the hardware prefetcher to automatically pre-fetch data

[Disabled] Disables the hardware prefetcher.

Adjacent Cache Line Prefetch [Enabled]

▶

Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher). [Enabled] Enables adjacent cache line prefetching for reducing the cache

[Disabled] Enables the requested cache line only.

CPU AES Instructions [Enabled]

▶

Enables or disables the CPU AES (Advanced Encryption Standard-New

Instructions) support. This item appears when a CPU supports this function. [Enabled] Enables Intel AES support. [Disabled] Disables Intel AES support.

Intel Adaptive Thermal Monitor [Enabled]

▶

Enables or disables the Intel adaptive thermal monitor function to protect the CPU

from overheating. [Enabled] Throttles down the CPU core clock speed when the CPU is over the

[Disabled] Disables this function.

Intel C-State [Auto]

▶

C-state is a processor power management technology defined by ACPI. [Auto] This setting will be configured automatically by BIOS. [Enabled] Detects the idle state of system and reduce CPU power consumption

[Disabled] Disable this function.

C1E Support [Disabled]

▶

Enables or disables the C1E function for power-saving in halt state. This item

appears when "Intel C-State" is enabled. [Enabled] Enables C1E function to reduce the CPU frequency and voltage for

[Disabled] Disables this function.

Package C State limit [Auto]

▶

This item allows you to select a CPU C-state mode for power-saving when system

is idle. This item appears when "Intel C-State" is enabled. [Auto] This setting will be configured automatically by BIOS. [C0~C7s] The power-saving level from high to low is C7s, C7, C6, C3, C2,

[No limit] No c-state limit for CPU.

and instructions into L2 cache from memory for tuning the CPU performance.

latency time and tuning the performance to the specific application.

adaptive temperature.

accordingly.

power-saving in halt state.

then C0.

3-20BIOS Setup 3-21 BIOS Setup

LakeTiny Feature [Disabled]

▶

Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears

when a installed CPU supports this function and "Intel C-State" is enabled. [Enabled] Enhance the dynamic IO load adjusted performance for accelerating

[Disabled] Disables this feature.

Note: The following items will appear when "Intel Turbo Boost " is enabled.

Long Duration Power Limit (W) [Auto]

▶

Sets the long duration TDP power limit for CPU in Turbo Boost mode.

Long Duration Maintained (s) [Auto]

▶

Sets the maintaining time for "Long duration power Limit(W)".

Short Duration Power Limit (W) [Auto]

▶

Sets the short duration TDP power limit for CPU in Turbo Boost mode.

CPU Current limit (A) [Auto]

▶

Sets maximum current limit of CPU package in Turbo Boost mode. When the

current is over the specified limit value, the CPU will automatically reduce the core

frequency for reducing the current.

1/2/3/4-Core Ratio Limit [Auto]

▶

These items only appear when a CPU that support this function is installed. These

items allow you to set the CPU ratios for different number of active cores in turbo

boost mode. These items appear when the installed processor supports this

function.

the SSD speed.

Chapter 3

M-FLASH

M-Flash funcion allows you to update BIOS from USB flash disk (FAT32/ NTFS format only), or allows the system to boot from the BIOS file inside USB flash disk (FAT/ FAT32 format only).

BIOS Boot Function [Disabled]

▶ Enables or disables the system to boot form USB flash disk with BIOS file. [Enabled] Enables the system to boot from the BIOS within USB flash disk. [Disabled] Enables the system to boot from the BIOS within ROM on motherboard. *This may cause system unstable, MSI recommend it only for power users.

Select one file to boot

▶

Chapter 3

Selects a BIOS file in the USB flash disk (NTFS/ FAT 32 format) to boot the system. This item will selectable when the “BIOS Boot function” is enabled.

Save BIOS to storage

▶ Saves the current BIOS file to the USB flash disk. The USB flash disk drive should be

in FAT32 format.

Update BIOS

▶ Selects a BIOS file in the USB flash disk (NTFS/ FAT 32 format) to update the BIOS.

Important

Select one file to update BIOS

▶

Selects a BIOS file in the USB flash disk (NTFS/ FAT 32 format) to update the

BIOS. The system will reboot after updating.

Select one file to update BIOS and ME

▶

Selects a BIOS file, includes the ME management settings, in the USB flash disk

(NTFS/ FAT 32 format) to update the BIOS and ME. The system will reboot after

updating.

3-22BIOS Setup 3-23 BIOS Setup

OC PROFILE

Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

▶ Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press <Enter> to enter the sub-

menu.

Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

▶

Names the current overclocking profile.

Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

▶

Saves the current overclocking profile.

Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

▶

Loads the current overclocking profile.

Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

▶

Clears the current overclocking profile.

OC Profile Save to USB

▶ Saves OC profile to the USB flash disk drive. The USB flash disk should be FAT32

format only.

OC Profile Load from USB

▶ Loads OC profile from the USB flash disk drive. The USB flash disk should be FAT32

format only.

Chapter 3

HARDWARE MONITOR

Current Temperature & Speed information

▶ Shows the current CPU temperature, system temperature and fans' speeds.

Temperature & Speed graphic display

▶ The red graph shows the minimum and maximum temperatures that be set on the

“Fan control field”. The yellow graph shows current CPU/ system temperature. The green shows current CPU/ System fan speed.

Fan control field

Chapter 3

▶ This motherboard provides a fan speed control feature call “Smart Fan Control”.

Smart Fan Control automatically controls fan speed depending on the current CPU temperature and to keep it with a specific operating speed. When the current CPU temperature is over the maximum temperature, the CPU/ system fan will run at the maximum speed. When the current CPU temperature is under the minimum temperature, the CPU/ system fan will run at the minimum speed. In this field, you can set the CPU and system fans’ speeds and target temperatures.

Temperature &

Speed

graphic display

Current

Temperature & Speed

information

Fan

control 󰘰eld

Voltage display

3-24BIOS Setup 3-25 BIOS Setup

Please follow the description below to set the temperatures and fan speeds.

a b

a - Selects a fan you want to specify the speed.

■ b - Checks this item to activate the following items for changing default values.

■ c - Slides the Min and Max tabs to set the minimum and maximum

■ temperatures.

d - Slides the arrow symbol to set the minimum fan speed in percentage.

■ e - Slides the arrow symbol to set the maximum fan speed in percentage.

■ f - Click the "Default" button to restore the default values. Or click the

■ "Cancel" button to abandon all changes and restore to the previous values.

Important

The minimum values of temperature and speed can not be set larger then the

•

maximum values. The changed settings will become effective after you save the changes and reboot

•

the system.

Voltage display

▶ Shows the current voltages of CPU, system and memory.

d e

Chapter 3

Appendix A

Intel SBA

Intel® Small Business Advantage (Intel® SBA) provides an out-of-the-box hardware-based security and productivity suite designed for the small business user. Intel® SBA includes a customizable user interface and several

bundled Intel applications.

Prerequisites

Supported Operating Systems

Appendix A

■ Intel SBA supports following OS:

■

Required User Permissions

■ You must run the installer and the customization wizard with a user that has local

administrator permissions on the computer.

Windows Update Settings

■ In certain conditions, the Windows Update task in the PC Health Center application is

disabled and cannot be enabled. This can occur if Intel SBA is installed on a computer where Windows Update was disabled during installation of the Windows operating system. The Windows Update task is shown in the GUI but is grayed out (disabled). Even if the end user enables Windows Update in the operating system, the PC Health Center task cannot be enabled. This means that the end user cannot use PC Health Center to manage Windows Update.

To prevent this, make sure that you do NOT select the Never check for updates option when installing the Windows operating system.

Windows Task Scheduler

■ Some PC Health Center tasks are applications that can also be used directly from

the operating system and scheduled via the Windows Task Scheduler. When a task is set via PC Health Center, an alarm clock is set that will wake up the computer if it is turned o󰘯. De󰘰ning a scheduled time for an application/task outside of PC Health Center does not set an alarm clock. This means that the computer will not be woken up to do the task.

For this reason, it is NOT recommended to de󰘰ne schedules for these applications:

■

Instead, let the end user set the schedule for all these tasks via PC Health Center.

Windows 7 Professional 64-bit and 32-bit Windows 7 Enterprise 64-bit Windows 8 PRO 64-bit and 32-bit

Windows Updates Windows Backup and Restore Disk defragmentation

A-2Intel SBA

Installing Intel SBA

This procedure describes how to install Intel SBA.

To install Intel SBA:

■ Logon to the computer with a user that has administrator privileges.

1. Insert the application DVD into the DVD-ROM drive. The setup screen will

2. automatically appear.

Click OTHERS tab.

3. Select Intel SBA to start installing.

4. Follow the on-screen instructions to install.

Software Con󰘰guration

After installation of the Intel SBA software is complete, the Intel SBA service is started. The desktop, system tray, and programs menu include shortcuts to the GUI of Intel SBA.

Software panel overview

The following 󰘰gure describes the function of the Intel SBA control panel.

Tabs Selection

Appendix A

Applications Selection Applications Description

A-3 Intel SBA

Password settings

By default, the system is in an uncon󰘰gured state. Before the hardware capabilities

Appendix A

can be used by Intel SBA software, the system must be con󰘰gured. This is done in the Settings > Password Settings tab in the main menu of the GUI.

Fill out the form to create the new password and click “Save”. You will be asked to enter the password when you want to start using Intel SBA.

Important

Upon completion of the password settings, please keep your password secure.

•

Please remember your answers to the security questions.

•

Help Button

There is a help button on the top right. If you need to know detailed introductions. Just click on the help button, to get the information.

A-4Intel SBA

MSI CSM-B85M-E45 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Preface

Copyright Notice

Trademarks

Revision History

Smartphone Application

Technical Support

Safety Instructions

FCC-B Radio Frequency Interference Statement

CE Conformity

Radiation Exposure Statement

European Community Compliance Statement

Taiwan Wireless Statements

Japan VCCI Class B Statement

Korea Warning Statements

Battery Information

Chemical Substances Information

WEEE (Waste Electrical and Electronic Equipment) Statement

Getting Started

Packing Contents

Optional Accessories

Assembly Precautions

Connectors Quick Guide

Back Panel Quick Guide

CPU (Central Processing Unit)

Introduction to the LGA 1150 CPU

CPU & Heatsink Installation

Memory

Dual-Channel mode Population Rule

Mounting Screw Holes

Power Supply

JPWR1~2: ATX Power Connectors

Expansion Slots

PCI_E1~E3: PCIe Expansion Slots

PCI1: PCI Expansion Slot

Video/ Graphics Cards

Single Video Card Installation

Internal Connectors

SATA1~6: SATA Connectors

CPUFAN,SYSFAN1~2: Fan Power Connectors

JFP1, JFP2: System Panel Connectors

JUSB1~2: USB 2.0 Expansion Connector

JUSB3: USB 3.0 Expansion Connector

JCI1: Chassis Intrusion Connector

JAUD1: Front Panel Audio Connector

JTPM1: TPM Module Connector

JLPT1: Parallel Port Connector

JCOM1: Serial Port Connector

Jumper

JBAT1: Clear CMOS Jumper

Drivers and Utilities

Total Installer

Quick Installation

CPU Installation

Memory Installation

Motherboard Installation

Power Connectors Installation

SATA HDD Installation

mSATA SSD Installation

Front Panel Connector Installation

JFP1 Connecotr Installation

Front Panel Audio Connector Installation

Peripheral Connector Installation

USB2.0 Connector Installation

USB3.0 Connector Installation

Graphics Card Installation

BIOS Setup

Entering Setup

Entering BIOS Setup

Overview

Operation

SETTINGS

System Status

Advanced

Boot

Security

Save & Exit