MSA Safety 10194775, 10194777, 10194813, 10194743, 10194751 User Manual

Above-the-Neck

Protection Solutions

Compatible safety products to protect your head, face, hearing, and vision

MSAsafety.com

1

Above-the-Neck Protection Solutions

Above-the-Neck Protection Solutions

Join the millions around the globe
who choose MSA: For safety. For value.

This catalog highlights MSA’s comprehensive head, eye, face and
hearing (HEFH) protection line. Our hard hats, eye/face protection
products, helmet accessories, hearing protection products—and
more—provide seamless safety solutions to protect workers
around the world. For a complete product listing, see the most
recent MSA Safety Equipment Catalog, call our award-winning
customer service department, or visit MSAsafety.com.

Save money, increase revenue
and reduce inventory costs with our
comprehensive Above-the-Neck
safety solutions:

“Try It” sample program oers100+

•

leading MSA products, including
V-Gard Hard Hats, V-Gard Accessories,
left/RIGHT earmus, and Sightgard®
eyewear–completely FREE of charge!
Look for the that tells you which products
are in the program.

Our products are tested by engineers in our own

•

test facilities. They are also certied and/or

tested by qualied, third-party test houses.

Table of Contents

V-Gard® Protective Hard Hats .......................................................................................... 4–6

V-Gard GREEN Hard Hats .................................................................................................6

Replacement Suspensions for MSA Hard Hats .............................................................................7

Hard Hat Customization ............................................................................................... 8–9

V-Gard NFL Hard Hats ...............................................................................................10–11

V-Gard Freedom Series and Specialty Hard Hats ..........................................................................12

V-Gard Hydro Dip Hard Hats .............................................................................................13

V-Gard 500 Hard Hats ...................................................................................................14

Topgard® Hard Hats ....................................................................................................14

SmoothDome® Hard Hats ...............................................................................................15

Thermalgard® Hard Hats ................................................................................................15

Skullgard® Hard Hats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Super-V® Hard Hats .....................................................................................................16

2

2

Comfo-Cap® Hard Hats ..................................................................................................17

Bump Caps .............................................................................................................17

V-Gard H1 Safety Helmets ...........................................................................................18–19

V-Gard Accessory System ...........................................................................................20–29

V-Gard Frames ...............................................................................................20–22

V-Gard Visors ................................................................................................23–27

V-Gard Headgear ................................................................................................28

V-Gard Chin Protectors ...........................................................................................29

V-Gard Accessory System Kits .....................................................................................29

V-Gard Frameless Barrier .........................................................................................30

V-Gard Accessory Replacement Parts ..............................................................................30

Welding Shield and Adapters ........................................................................................31–32

Hard Hat Accessories ...............................................................................................33–35

Hearing Protection .................................................................................................36–37

Sightgard® Protective Eyewear ......................................................................................38–43

Sightgard Safety Glasses .....................................................................................38–41

Sightgard Safety Goggles ....................................................................................42–43

Eyewear Accessories .............................................................................................43

ANSI/ISEA Z89.1-2014 and CSA Z94.1-2015 (Industrial Head Protection Standards)

ANSI/ISEA Z89.1-2014 and CSA Z94.1-2015 voluntary industry standards establish
industrial helmet types and classes, providing performance and testing requirements.
These standards include specications for helmets designed to oer protection from top
and/or lateral impact.

Three classes included in these standards indicate helmet electrical insulation rating:

Class E (Electrical) – Helmets intended to reduce the danger of exposure to high-voltage
electrical conductors, proof-tested at 20,000 volts.

Class G (General) – Helmets intended to reduce the danger of exposure to low-voltage
electrical conductors, proof-tested at 2,200 volts.

Class C (Conductive) – Helmets do not provide protection from electrical conductors.

Industrial head protection test requirements per ANSI/ISEA Z89.1-2014 and CSA Z94.1-2015
are separated by helmet type: Type I helmets protect wearers from top impact, while Type II
helmets protect wearers from top and lateral impact. Test requirements for ANSI/ISEA Z89.1­2014 and CSA Z94.1-2015 are available from the Industrial Safety Equipment Association
(www.safetyequipment.org) and www.CSA.ca, respectively.

In addition to three non-mandatory tests for reverse donning [ ], lower temperature
[LT] and high-visibility [HV], the ANSI/ISEA Z89.1-2014 standard also includes these
provisions:

n Section 5: Accessories and Replacement Components

Revised standard includes language to further support the premise that accessory/
component manufacturers are responsible for proving that their products do not
cause helmets to fail.

n Section 6: Instructions and Markings

Clarication language was added to help customers understand that “useful service
life” for helmets is not required by the Standard, although helmet manufacturers
may choose to include it.

n Section 7.3.3 Higher Temperatures (HT)

Revision enables additional protection in response to needs of users who may
work within hot environments. Optional preconditioning at higher temperatures
of 60°C ± 2°C (140°F ± 3.6°F) has been added. (In the 2009 Standard, temperature
conditioning was 48.8°C ± 2°C (120°F ± 3.6°F).) If a helmet has been
pre-conditioned to 60°C ± 2°C (140°F ± 3.6°F), the helmet will be marked as HT.
In addition, new updates allow for exibility and inclusion of emerging and current
best manufacturing materials for higher temperature protection.

NOTE: the Standard does not address pre-conditioning that could be needed for temperature and
radiant heat extremes. To ensure that you have the proper head protection level needed for your
specic heat application, check with the manufacturer for stated usage of any helmet.

Non-Mandatory
ANSI/ISEA Z89.1-2014 Tests

Reverse Donning [ ]

To enable a helmet to be worn in
reverse, or a swing ratchet suspension
to be used in a helmet, that particular
helmet must be marked with the
“double-arrowed circle” to indicate that
it meets the non-mandatory reverse
donning test.

Lower Temperature [LT]

The traditional low temperature test
for a helmet is -18°C or 0°F. Helmets
that meet ANSI Z89.1 requirements
for LOWER temperatures (-30°C or

-22°F) can be marked with LT by the
manufacturer.

High-Visibility [HV]

Helmets that meet non-mandatory
requirements for high-visibility, including
special tests forchromaticity and
luminescence for added visibility, can be
marked with HV by the manufacturer.

Higher Temperature [HT]

The traditional pre-conditioning
temperature test for a helmet is 48.8°C
± 2°C (120°F ± 3.6°F). Helmets that
meet ANSI Z89.1 requirements for
HIGHER temperatures pre-conditioned
to 60°C ± 2°C (140°F ± 3.6°F) can be
marked with HT by the manufacturer.
HT does not indicate pre-conditioning
that could be needed to validate
temperature and radiant heat extremes.

3

3

All MSA hard hats have been tested per the mandatory and non-mandatory ANSI/ISEA Z89.1-2014 and CSA Z94.1-2015 requirements,
as indicated. MSA oerings include:

MSA Hard Hat Standard(s) Type Class

V-Gard Cap/Hat ANSI/ISEA Z89.1-2014; CSA Z94.1-2015 Type I Class E HT/ /LT/HV

V-Gard GREEN Cap/Hat ANSI/ISEA Z89.1-2014; CSA Z94.1-2015 Type I Class E HT/ /LT/HV

V-Gard 500 Vented Cap/Hat ANSI/ISEA Z89.1-2014; CSA Z94.1-2015 Type I Class C HT/ /LT/HV

V-Gard 500 Non-Vented Cap/Hat ANSI/ISEA Z89.1-2014; CSA Z94.1-2015 Type I Class E HT/ /LT/HV

SmoothDome Cap ANSI/ISEA Z89.1-2014; CSA Z94.1-2015 Type I Class E HT/ /LT/HV

Topgard Cap/Hat ANSI/ISEA Z89.1-2014; CSA Z94.1-2015 Type I Class E HT/ /LT/HV

Thermalgard Cap ANSI/ISEA Z89.1-2014; CSA Z94.1-2015 Type I Class G HT/ /LT/HV

Skullgard Cap/Hat ANSI/ISEA Z89.1-2014 Type I Class G HT/ /LT/HV

Super-V Cap ANSI/ISEA Z89.1-2014; CSA Z94.1-2015 Type II Class E HT/LT/HV

Comfo Cap ANSI/ISEA Z89.1-2014 Type I Class G HT/LT

For additional ANSI/ISEA Z89.1-2014 update details, please refer to MSA white paper ANSI/ISEA Z89.1-2014 American
National Standard for Industrial Head Protection (ID0600-66-MC / August 2014). This white paper is available as a FREE
download on any MSA industrial helmet page when you visit www. MSAsafety.com.

ANSI Z89

Non-Mandatory Tests

MSAsafety.com

MSAsafety.com

Above-the-Neck Protection Solutions

KNOW?

DID YOU

Above-the-Neck Protection Solutions

V-Gard Hard Hats

V-Gard Cap

with Fas-Trac III Suspension

V-Gard Full-Brim Hat

with Fas-Trac III Suspension

Gloss Finish

Classication ................................................................... Type I

Application ....................................................................... General purpose

Shell Material .................................................................. Polyethylene

Styles .................................................................................... Slotted cap; slotted full-brim hat

Colors ................................................................................... Cap-Style:

Sizes ...................................................................................... Cap-Style: small (6 – 71⁄8”); standard (61⁄2 – 8”); large (7– 81⁄2”)

Standards .......................................................................... ANSI/ISEA Z89.1-2014 (Class E); CSA Z94.1-2015 (Class E)

Certication ..................................................................... Third-party by SEI

Customization ................................................................ Imprinting and striping available (see pages 8–9)

Replacement Suspensions ..................................... See page 7

44

Matte Finish

Classication ................................. Type I

Application ..................................... General purpose

Shell Material ................................ Polyethylene

Styles .................................................. Slotted cap only

Colors ................................................. Cap-Style:

Full-Brim Hat: 

Full-Brim Hat: standard (61⁄2 – 8”)



nnnnnnnn



nnnnnnnnnnnnnnnnnnnn

nnnnnnnnnn

Sizes .................................................... Cap-Style: standard (61⁄2 – 8”)

Standards ........................................ ANSI/ISEA Z89.1-2014 (Class E);

CSA Z94.1-2015 (Class E)

Certication ................................... Third-party by SEI

Customization .............................. Imprinting and striping available

(see pages 8–9)
Replacement Suspensions ... See page 7

All V-Gard Helmets have UV inhibitor molded right in.

Did you know that MSA oers a complete line of MSA hard hat accessories?
See pages 20–36 for more information.

V-Gard Hard Hats

Small V-Gard Slotted Cap Standard V-Gard Slotted Cap Large V-Gard Slotted Cap

Color

w/ Staz-On®
Suspension

COMPLETE VGARD ASSEMBLIES  GLOSS FINISH

WHITE 466354 477477 463942 10057441 475358 473284 477482

BLUE 466355 477478 463943 10057442 475359 476928 477483

YELLOW 466356 477479 463944 10057443 475360 473285 477484

ORANGE — — 463945 10057444 475361 — —

RED — — 463947 10057446 475363 — —

GREEN — — 463946 10057445 475362 — —

GRAY — — 463948 10057447 475364 — —

HIVIZ® ORANGE

HIVIZ YELLOWGREEN

2

2

— — 488148 10057420 488146 — 489364

— — — 10061514 10061512 — —

BRIGHT LIME GREEN — 489368 815558 — 815565 — —

DARK CANADIAN BLUE — — — — 802972 — —

GOLD — — 464852 — 475365 — —

ROBIN’S EGG BLUE — — 463111 — 495853 — —

BROWN — — 464658 — 495854 — —

SILVER — — 484340 — 495855 — —

TAN — — 461180 — — — —

BLACK — — 475235 — 492559 — —

LIGHT BUFF — — 478237 — 495856 — —

PURPLE — — 488398 — 495858 — —

PINK — — — — 495862 — —

HOT PINK — — 10155231 — 10155230 — —

w/ Fas-Trac® III

Suspension

w/ Staz-On

1

Suspension

w/ 1 Touch®
Suspension

1

w/ Fas-Trac III

Suspension

w/ Staz-On

1

Suspension

w/ Fas-Trac III

Suspension

1

V- Gard Slotted Full-Brim Hat (Std)

Color

w/ Staz-On

Suspension

w/ 1 Touch

Suspension

1

w/ Fas-Trac III

Suspension

COMPLETE VGARD ASSEMBLIES  GLOSS FINISH

WHITE 454733 10058321 475369

BLUE 454732 10058320 475368

YELLOW 454730 10058318 475366

ORANGE 454734 10058322 496075

RED 454736 10058324 475371

GREEN 454735 10058323 475370

GRAY 454731 10058319 475367

HIVIZ® ORANGE

HIVIZ YELLOWGREEN

2

489360 10058326 10021292

2

— 10061516 10061515

BRIGHT LIME GREEN 815562 — 815570

DARK CANADIAN BLUE — — 802975

HOT PINK 10156374 — 10156373

1

Certied to CSA.

2

V-Gard Cap/Hat meets voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2014.

Look for ocial hi-visibility marking [HV] on the helmet’s ANSI label.

V- Gard Slotted Cap (Std)

1

Color

w/ Fas-Trac III

Suspension

1

5

5

5

COMPLETE VGARD ASSEMBLIES  MATTE FINISH

WHITE 10203081

BLUE 10203082

YELLOW 10203083

ORANGE 10203087

RED 10203086

GREEN 10203085

GRAY 10203084

HIVIZ® ORANGE

HIVIZ YELLOW

2

2

10203089

10203088

BLACK 10203092

MSAsafety.com

MSAsafety.com

Above-the-Neck Protection Solutions

KNOW?

DID YOU

Above-the-Neck Protection Solutions

V-Gard Hard Hat Special Assemblies

Standard V-Gard Slotted Cap V- Gard Slotted Full-Brim Hat

Color

SPECIAL VGARD ASSEMBLIES

HIVIZ ORANGE w/yellow-green stripe

HIVIZ YELLOWGREEN w/red-orange stripe

HIVIZ YELLOWGREEN w/silver stripe

WHITE w/lamp bracket and cord holder (Class C) 460018 — — 460069 — 815009

WHITE w/American Flag 474159 — — — — —

VGARD ASSEMBLY WITH SWINGRATCHET SUSPENSION

WHITE 10004689 Standard-size V-Gard Cap, w/Swing-Ratchet Suspension

w/ Staz-On

Suspension

2

— 10102195 10102193 — — —

2

— 10102234 10102233 — — —

2

— 10102196 10102194 — — —

w/ 1 Touch

Suspension

1

w/ Fas-Trac III

Suspension

w/ Staz-On

1

Suspension

w/ 1 Touch

Suspension

1

w/ Fas-Trac III

Suspension

1

V-Gard w/Swing-Ratchet Suspension

V-Gard w/Lamp Bracket and Cord Holder

V-Gard® GREEN Hard Hats: the world’s rst hard hat made from renewable resources

V-Gard GREEN hard hats are constructed of renewable green
high-density polyethylene (GHDPE); traditional V-Gard Helmets
are manufactured through standard HDPE production methods.
V-Gard GREEN hard hats provide the same appearance and
quality as MSA V-Gard hard hat. Test results for V-Gard GREEN
helmet shells indicated 95% bio-based content.

66

Classication ................................. Type I

Application ..................................... General purpose

Shell Material ................................ Green high-density polyethylene (GHDPE)

Styles .................................................. Slotted cap with 4-point Fas-Trac® III Suspension; slotted full-brim hat with 4-point Fas-Trac® III Suspension

Colors .................................................

Sizes .................................................... Standard (61⁄2 – 8”)

Standards ........................................ ANSI/ISEA Z89.1-2014 (Class E); CSA Z94.1-2015 (Class E)

Certication ................................... Third-party by SEI; USDA Biobased Certied

Customization .............................. Imprinting and striping available (see pages 8–9)

Replacement Suspensions ... See page 7



nnnn

V-Gard GREEN Slotted Cap V- Gard GREEN Slotted Full-Brim Hat

WHITE 10150199 10160923

YELLOW 10150200 10160924

BLUE 10150221 10160925

GREEN 10150222 10160926

RED 10150223 10160927

1

Certied to CSA.

2

V-Gard Cap/Hat meets voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2014.

Look for ocial hi-visibility marking [HV] on the helmet’s ANSI label.

On average, production of each
V-Gard GREEN helmet removes
approximately 2 lbs. of CO

from the

2

atmosphere, according to the GHDPE
material supplier.

Replacement Suspensions for MSA Hard Hats

MSA Fas-Trac® III Ratchet Suspension

The MSA Fas-Trac III Suspension helps to reduce pressure headaches and pulled hair,
and stays on your head.



Sweatband fully covers headband and worker’s forehead

 Three levels of nape strap adjustment for customized t
 Lower nape strap improves retention
 Smooth ratchet rotation and secure hold

Learn how the Fas-Trac III Suspension can relieve your headaches.
Visit www.MSAsafety.com/fastrac.

Fas-Trac III 1 Touch Staz-On Swing Ratchet

HELMET TYPE (SIZE)

VGARD CAP OR HAT STANDARD 10148708 10061123 10087218 816645

VGARD CAP SMALL 10148706 — 467386 —

VGARD CAP LARGE 10148707 — 492566 —

VGARD 500 CAP STANDARD 10148708 10061123 10087218 816645

VGARD 500 HAT STANDARD 10148708 — 10087218 —

SMOOTHDOME CAP STANDARD 10148708 10061123 10087218 816645

TOPGARD CAP OR HAT STANDARD 10153384 10061127 — 816648

THERMALGARD CAP STANDARD 10153384 10061127 — —

SKULLGARD CAP OR HAT STANDARD 10153385 10061128 454231 816654

SKULLGARD CAP LARGE 10126693 — 468096 —

SUPERV CAP STANDARD 10126683 — — —

VANGUARD CAP STANDARD 10153386 — — —

COMFOCAP STANDARD 10153385 10061128 454231 —

➍

SUSPENSION TYPE (4-point, unless otherwise noted)

u

➋

➌

1

7

7

The Fas-Trac III Suspension sweatband accessory keeps workers cool and dry.

Part No. Product Specics

10153518 • For use with MSA Fas-Trac® III Suspension

Use only the indicated MSA suspension in your MSA helmet. Do not mix suspension sizes and helmet sizes (i.e., putting a standard sized
suspension in a large helmet or any other mismatched combination). Do not use competitor suspensions in MSA helmets. Inspect your
suspension frequently. Suspensions should be replaced every 12 months, regardless of inspection results. Replace immediately (along with
the helmet), if an impact has occurred. Failure to follow these instructions will reduce the energy absorbing ability of the protective helmet to
receive impact, and could result in serious injury or death.

1

Swing ratchet size is 61⁄2” through 75⁄8”

• Optional, moisture-wicking and washable

• Can be attached/replaced while suspension is assembled in helmet

• Sold ONLY in packages of 10

MSAsafety.com

MSAsafety.com

Above-the-Neck Protection Solutions

Helmet Customization For 30+ Years

Practice makes perfect logos:

• MSA uses inks and processes that create durable logos.

We have never had a complaint about a logo “scratching
o” in the 30+ years we have been in the logo business!

• It can be tricky to avoid logo distortion due to the curvature

of the hard hat. That’s why MSA Logo Express® Service employs
graphic designers who process logos onto hard hats. These
skilled artisans ensure each logo is placed properly so it not
only endures, but also accurately represents your brand and
logo in color, size and shape–despite the curve of the hard hat.

• MSA oers multiple printing services from simple one-color

logo to digital photos, in up to four locations

• We don’t require “color-separated” artwork for 1+ color logos;

nor do we require customers to identify the PMS colors in their
logos. Our graphic artists can manage that, if you do not have
these details.

• Re-ordering is easy because we keep your logo on le until

you change it

1

.

Our Process

Once your order has been received by the MSA Logo Express
Service Design center we get to work. Files are imported from
your on-line hard hat conguration, assessed for usability and
colors separated (if the PMS colors have not been identied)
and layout nalized. Should you choose to personalize your
hard hat, don’t forget to complete form ID# 0617-17 and
submit with your order.

Delivery

Once the layout process is complete, our factory craftsman get
to work on your order. Your order for a new hard hat logo should

8

ship within eight (8) days from our Murrysville, PA plant from the
date we receive your approval on the artwork

2

.

Minimum Order Quantities (MOQ)

MSA requires MOQs, by hard hat type, for logoing and striping.
Qualifying MOQs of custom-imprinted or striped hard hats
must be of the same size, model and options (i.e., color and
suspension). MOQs are:

• 20 for V-Gard, SmoothDome®, Topgard, Comfo Cap Hard Hats,

and Nexus Climbing Helmets

• 16 for Skullgard or Thermalgard® Hard Hats

• 12 for Super-V and Vanguard Hard Hats

• 40 for Bump Caps

Striping

Add any of 27+ dierent reective and retro-reective stripes
to your hard hat. MSA reective stripes help enhance the
visibility of workers in daytime conditions, while retro-reective

3

stripes

oer additional enhancement in nighttime or low-light
conditions. Stripes are available in various sizes and shapes,
and can be placed on all types of MSA hard hats.

Keep in mind too, that while you can order more stripes for
self-application, MSA does not recommend doing this. The reason
for this is MSA pre-treats all hard hats prior to striping with an
electrical discharge treatment to enhance the ability of the stripes
adhesive bonds.

Stock Logos and Slogans

With 23 “pre-built” stock logos and slogans, MSA oers more
“o-the-shelf” hard hat graphics than anyone in the industry.
Our newest stock logos honor breast cancer survivors and
ghters everywhere. They were designed specically for use on
our new Hot Pink V-Gard, but work well on just about any MSA
hard hat! Standard logos make it easy for you to place emphasis
on safety, patriotism or personnel identication without having
to develop your own artwork. They can be can be used alone or
with your customized logo and striping.

Hard Hat Color Choices

MSA oers more stocked color options than competitors.
In fact, in our popular V-Gard hard hat, we oer 21 stocked colors,
including our newest: Hot Pink! There are non-stocked color
options available for all MSA hard hats; a qualifying MOQ of 100
hard hats is required.

Personalization

The same quality and precision that MSA logos have become
famous for is now available with personalization. You can add
your name, ID#, title, or anything else with this additional option.

Pricing

Please refer to your local distributor for pricing details on standard
and non-standard charges that may apply to your order.

1

Files are purged from MSA’s system if no logoed hard hat order is received within three (3) years of the rst order.

2

Orders for repeat logos ship within seven (7) days. This includes 2-3 days for order processing, and 5 days for production.

DID YOU

KNOW?

You can create a shell color of your choice.
You need only order a qualifying MOQ
of 500 hard hats or more.

Placing Customized Hard Hat Orders

Steps to complete your on-line logo conguration order:

1. Visit: http://webapps2.msasafety.com/logoexpress/#/intrologin

2. Select “No” when asked are you a distributor.

3. Select “Customize Now”.

4. Choose a standard.

5. Select your hard hat and click ”Customize It”.

6. Choose your size.

7. Choose your suspension (Fas-Trac III is recommended).

8. Choose your shell color.

9. Choose any striping you wish to include.

10. Upload your logo or chose from a stock logo.

• Logos cannot be trademarked or of any sports team
without the written consent of the logo owner.

• For optimum quality and turnaround, please submit
artwork as a vector le format.

• Acceptable formats include: CDR, AI, and EPS. Don’t have
a vector le? We also accept these formats: JPG, PDF, TIFF,
PNG, BMP and GIFs.

11. Place your order.

If you are the end user:

• Save and email.

• Review terms and click “Accept”.

• Complete form and send email to:

- Distributor Name

- Distributor Email

If you are a Channel Partner, you can place the order once you have

completed the logoing process OR you can enter in the code emailed
to you by the end user to nalize the ordering process.

Should you choose to personalize your hard hat, please complete
form ID #0617-17-MC and submit with order.

Please see “MSA Logo Express® Service



Artwork Guidelines” (ID 0617-06-MC) for details
on artwork submission. We can deliver your
custom hard hats faster if we have our preferred
artwork le formats, but we will work with
whatever you give us to recreate your logo.

Submit an electronic le of your artwork by email



([e-mail]) or by US Postal
Service:

MSA Logo Express
3880 Meadowbrook Rd.
Murrysville, PA 15668-1753

Be sure to include a copy of the completed Order
Form with your artwork submission.

Questions about Helmet Customization?

Contact your MSA distributor or MSA Logo
Express Service.

EMAIL: [e-mail]
PHONE: 1-800-MSA-LOGO

?

ADDRESS: MSA Logo Express

us.msasafety.com/logoexpress

(1-800-672-5646)

3880 Meadowbrook Rd.
Murrysville, PA 15668-1753

Visit us on the web:

KEYWORD: Logo

9

The “Try-It” Sample Program

The “Try It” sample program oers some of the most

popular MSA head, eye, face and hearing protection

products, including V-Gard Helmets, V-Gard Accessories,

left/RIGHT Hearing Protection, and Sightgard® Eyewear—

completely FREE of charge! Look for the that tells

you which products are included in the program.

See what a logoed V-Gard Cap, Hat or 500 Helmet looks like. Pre-designed
logoed hard hat samples are available through the FREE sample Try It program.
Contact your MSA sales representative for more details.

MSAsafety.com

Above-the-Neck Protection Solutions

Ocially Licensed NFL V-Gard Hard Hats

Classication ...........................Type I

Application ...............................General purpose

Shell Material ..........................Polyethylene

Styles ............................................Slotted cap/hat

V-Gard NFL Cap-Style Hard Hats

Arizona Cardinals

Part No. 818384

Chicago Bears

Part No. 818389

Detroit Lions

Part No. 818394

Atlanta Falcons

Part No. 818385

Cincinnati Bengals

Part No. 818390

Green Bay Packers

Part No. 818395

Suspension ...............................Fas-Trac III

1

Sizes .............................................. Standard (6

⁄2 – 8”)

Standards ..................................ANSI/ISEA Z89.1-2014 (Class E); CSA Z94.1-2015 (Class E)

Certication .............................Third-party by SEI

Baltimore Ravens

Part No. 818386

Cleveland Browns

Part No. 818391

Houston Texans

Part No. 10031348

Bualo Bills

Part No. 818387

Dallas Cowboys

Part No. 818392

Indianapolis Colts

Part No. 818396

Carolina Panthers

Part No. 818388

Denver Broncos

Part No. 818393

Jacksonville Jaguars

Part No. 818397

10

Kansas City Chiefs

Part No. 818398

New England Patriots

Part No. 818401

Philadelphia Eagles

Part No. 818406

Los Angeles Chargers

Part No. 818408

New Orleans Saints

Part No. 818402

Pittsburgh Steelers

Part No. 818407

Los Angeles Rams

Part No. 818411

New York Giants

Part No. 818403

San Francisco 49ers

Part No. 818409

Miami Dolphins

Part No. 818399

New York Jets

Part No. 818404

Seattle Seahawks

Part No. 818410

Minnesota Vikings

Part No. 818400

Oakland Raiders

Part No. 818405

Tampa Bay Buccaneers

Part No. 818412

Tennessee Titans

Part No. 818413

NFL Properties, the NFL and its Member Clubs make no express or implied claims with respect to eectiveness and safety of these products and have not manufactured or endorsed these products in
any way.

Ocially Licensed NFL V-Gard Hard Hats

Classication ...........................Type I

Application ...............................General purpose

Shell Material ..........................Polyethylene

Styles ............................................Slotted cap/hat

V-Gard NFL Full-Brim Hard Hats

Arizona Cardinals

Part No. 10194742

Chicago Bears

Part No. 10194747

Detroit Lions

Part No. 10194752

Atlanta Falcons

Part No. 10194743

Cincinnati Bengals

Part No. 10194748

Green Bay Packers

Part No. 10194753

Suspension ...............................Fas-Trac III

1

Sizes .............................................. Standard (6

⁄2 – 8”)

Standards ..................................ANSI/ISEA Z89.1-2014 (Class E); CSA Z94.1-2015 (Class E)

Certication .............................Third-party by SEI

Baltimore Ravens

Part No. 10194744

Cleveland Browns

Part No. 10194749

Houston Texans

Part No. 10194754

Bualo Bills

Part No. 10194745

Dallas Cowboys

Part No. 10194750

Indianapolis Colts

Part No. 10194755

Carolina Panthers

Part No. 10194746

Denver Broncos

Part No. 10194751

Jacksonville Jaguars

Part No. 10194769

Kansas City Chiefs

Part No. 10194770

New England Patriots

Part No. 10194773

Philadelphia Eagles

Part No. 10194778

Los Angeles Chargers

Part No. 10194780

New Orleans Saints

Part No. 10194774

Pittsburgh Steelers

Part No. 10194779

Los Angeles Rams

Part No. 10194811

New York Giants

Part No. 10194775

San Francisco 49ers

Part No. 10194781

Miami Dolphins

Part No. 10194771

New York Jets

Part No. 10194776

Seattle Seahawks

Part No. 10194782

Tennessee Titans

Part No. 10194813

NFL Properties, the NFL and its Member Clubs make no express or implied claims with respect to eectiveness and safety of these products and have
not manufactured or endorsed these products in any way.

Minnesota Vikings

Part No. 10194772

11

Oakland Raiders

Part No. 10194777

Tampa Bay Buccaneers

Part No. 10194812

MSAsafety.com

Above-the-Neck Protection Solutions

Freedom Series™ and Specialty V-Gard Hard Hats

Classication .........................Type I

Application .............................General purpose

Shell Material ........................Polyethylene with thermoformed graphics

Styles ..........................................Slotted cap;

Slotted full-brim hat (Freedom Series only)

Suspension .............................Fas-Trac III

1

Sizes ............................................Standard (6

⁄2 – 8”)

American Freedom Series Assemblies

American Stars and Stripes

V-Gard Slotted Cap

Part No. 10052945

Camouage

V-Gard Slotted Cap

Part No. 10103908

American Stars and Stripes

V-Gard Slotted Hat

Part No. 10071157

Camouage

V-Gard Slotted Hat

Part No. 10104254

Standards ................................ANSI/ISEA Z89.1-2014 (Class E);

CSA Z94.1-2015 (Class E)

Certication ...........................Third-party by SEI

Customization ......................Imprinting and striping available

(see pages 8–9)

Replacement

Suspensions ...........................See page 7

American Flag w/2 Eagles

V-Gard Slotted Cap

Part No. 10052947

American Eagle

V-Gard Slotted Cap

Part No. 10079479

American Flag w/2 Eagles

V-Gard Slotted Hat

Part No. 10071159

Dual American Flag

V-Gard Slotted Cap

Part No. 10050611

12

Canadian Freedom Series Assemblies

White w/Red Maple Leaf

V-Gard Slotted Cap

Part No. 10050613

Camouage w/Canadian Flag on front1

V-Gard Slotted Cap

Part No. 10104925

Specialty V-Gard Assemblies

Rally Cap

V-Gard Slotted Cap

Part No. 10103908

White w/Red Maple Leaf

V-Gard Slotted Hat

Part No. 10082234

Metallic Gold

V-Gard Slotted Cap

Part No. 10103908

Black w/Red Maple Leaf

V-Gard Slotted Cap

Part No. 10082233

Black Fire

V-Gard Slotted Cap

Part No. 10103908

Black w/Red Maple Leaf

V-Gard Slotted Hat

Part No. 10082235

Extreme Hi-Viz Cap2

V-Gard Slotted Cap

Part No. 10103908

1

Not pictured

2

Extreme Hi-Viz Cap meets high-visibility requirements of ANSI/ISEA 107.

Hydro Dip V-Gard Hard Hats

Classication .........................Type I

Application .............................General purpose

Shell Material ........................Polyethylene

Styles ..........................................Slotted cap;

Slotted full-brim hat

Suspension .............................Fas-Trac III

1

Sizes ............................................Standard (6

⁄2 – 8”)

Standards ................................ANSI/ISEA Z89.1-2014 (Class E);

CSA Z94.1-2015 (Class E)

Certication ...........................Third-party by SEI

Customization ......................Imprinting and striping available

(see pages 8–9)

Replacement

Suspensions ...........................See page 7

The #1 Selling Hard Hat Has a New Look!

The features that have set the MSA V-Gard as a world leader in head protection remain: comfort, durability, customization, and
support. The hydro dip nish provides a new twist on style, without sacricing safety or performance. Choose from eight dierent
standard looks, with the ability to customize to your specic design.* All V-Gard hydro dip hard hats come with the rst-in-class comfort
of the Fas-Trac® III Suspension and are products of the U.S.

HYDRO DIP VGARD ASSEMBLIES

Standard Cap Styles

Muddy Girl

V-Gard Slotted Cap

Part No. 10204770

One Nation

V-Gard Slotted Cap

Part No. 10204771

Italian Leather

V-Gard Slotted Cap

Part No. 10204773

Oileld Camo

V-Gard Slotted Cap

Part No. 10204774

Multi Camo

V-Gard Slotted Cap

Part No. 10204775

Standard Full-Brim Hat Styles

Muddy Girl

V-Gard Slotted Hat

Part No. 10204779

Multi Camo

V-Gard Slotted Hat

Part No. 10204784

*Restrictions apply

Silver Carbon Fiber

V-Gard Slotted Cap

Part No. 10204776

One Nation

V-Gard Slotted Hat

Part No. 10204780

Silver Carbon Fiber

V-Gard Slotted Hat

Part No. 10204785

Sport Carbon Fiber

V-Gard Slotted Cap

Part No. 10204777

Italian Leather

V-Gard Slotted Hat

Part No. 10204782

Sport Carbon Fiber

V-Gard Slotted Hat

Part No. 10204786

Devil’s Kanyon

V-Gard Slotted Cap

Part No. 10204778

Oileld Camo

V-Gard Slotted Hat

Part No. 10204783

Devil’s Kanyon

V-Gard Slotted Hat

Part No. 10204787

MSAsafety.com

13

Above-the-Neck Protection Solutions

14

V-Gard 500 Hard Hats

V-Gard 500 Cap

with Fas-Trac III Suspension

Vented V-Gard 500 Caps and Hats provide cooling vents for
improved air circulation and comfort; Non-Vented V-Gard 500

Caps and Hats provide dielectric head protection.

Classication .............................Type I

Application .................................General purpose

Shell Material ............................Polyethylene

Styles ..............................................Vented or non-vented slotted cap

Vented or non-vented hat

Colors .............................................

Sizes ................................................Standard (61⁄2 – 8”)

Standards ....................................ANSI/ISEA Z89.1-2014

(Vented Class C; Non-Vented Class E)
CSA Z94.1-2015
(Vented Class C; Non-Vented Class E)

Certication ...............................Third-party by SEI

DESCRIPTION

VENTED CAP

WHITE 10034018 10034027

YELLOW 10034020 10034029

GREEN 10034023 10034032

HIVIZ ORANGE

HIVIZ YELLOWGREEN

NONVENTED CAP

WHITE 10034088 10034097

VENTED FULLBRIM HAT

WHITE 10167911 10167950

YELLOW 10167913 10167952

GREEN 10167916 10168438

HIVIZ ORANGE

HIVIZ YELLOWGREEN

NONVENTED FULLBRIM HAT

WHITE 10168521 10168589



nnnnnn

w/4-Point Fas-Trac III

Suspension

BLUE 10034019 10034028

RED 10034022 10034031

1

10034026 10034035

1

10074819 10074820

BLUE 10167912 10167951

RED 10167915 10168437

1

10167921 10168453

1

10167931 10168461

w/6-Point Fas-Trac III

Suspension

Topgard® Hard Hats

White w/lamp bracket

Topgard Cap

with Fas-Trac III Suspension

Classication ................................. Type I

Application ..................................... General purpose;

elevated temperature

Shell Material ................................ Polycarbonate

Styles .................................................. Slotted cap;

Non-slotted full-brim hat

Colors .................................................



nnnnnnn

Sizes .................................................... Standard (61⁄2 – 8”)

Standards ........................................ ANSI/ISEA Z89.1-2014 (Class E)

CSA Z94.1-2015 (Class E)

Certication ................................... Third-party by SEI

DESCRIPTION

TOPGARD SLOTTED CAP STANDARD SIZE

WHITE 454728 475385

YELLOW 454721 475378

GRAY 454722 475379

BLUE 454723 475380

ORANGE 454725 475382

GREEN 454726 475383

RED 454727 475384

BRIGHT ORANGE — 804396

WHITE W/LAMP BRACKET

AND CORD HOLDER

TOPGARD NONSLOTTED HAT STANDARD SIZE

WHITE 454719 475393

YELLOW 454712 475387

GRAY 454713 —

BRIGHT ORANGE — 804397

w/ 1 Touch

Suspension

448914 —

1

w/ Fas-Trac III

Suspension

Customization: Imprinting and striping available—see pages 8–9 Replacement Suspensions: See page 7

1

V-Gard Cap/Hat meets voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2014. Look for ocial hi-visibility marking [HV] on the helmet’s ANSI label.