MSA P-MAN003 User Manual

MSA Customer Service 1-800-MSA-2222

MINE SAFETY APPLIANCES COMPANY

P.O. BOX 426

Pittsburgh, PA 15230

DigiCal ™ Primary Calibrator

Catalog No: 655101

INSTRUCTION MANUAL

VERSION : 2

P-MAN003 MSA DIGICAL
V9-2005

www.msanet.com

LIMITATION OF LIABILITY

The seller shall not be liable of any claim for
consequential or special loss or damage arising or
alleged to have arisen from any delay in delivery or
malfunction or failure of the equipment. The Seller's
liability for any other loss or damage arising out of or
connected with the manufacture, sale or use of the
equipment sold, including damage due to negligence,
shall not in any event exceed the price of the equipment
supplied by us.

MSA reserves the right to make changes at any time,
without notice, in prices, colors, materials,
specifications, and models; and to discontinue models.

COPYRIGHT PROTECTION OF DOCUMENT
Copyright © 1996-2005, MSA
This operating and service manual and the data enclosed
herein are not to be reproduced or used, in whole or in
part, by anyone without the written permission of MSA.

13

WARRANTY

The Seller warrants to the Purchase r that any equipment
manufactured by it and bearing its name plate to be free
from defects in material or workmanship, under proper
and normal use and service, as follows: if, at any time
within 1 year from the date of sale, the Purchaser
provides proof of purchase and notifies the Seller that in
his opinion, the equipment is defective, and returns the
equipment to the Seller's originating factory prepaid,
and the Seller's inspection finds the equipment to be
defective in material or workmanship, the Seller will
promptly correct it by either, at its option, repairing any
defective part or material or replacing it free of charge.
If inspection by the Seller does not disclose any defect
in material or workmanship, the Seller's regular charges
will apply. This warranty shall be effective only if
installation and maintenance is in accordance with our
instructions and written notice of a defect is given to the
Seller within such period. This warranty is exclusive
and is in lieu of any other warranties, written, oral or
implied; specifically, without limitation, there is no
warranty, of merchantability or fitness for any purpose.
The liability of the Seller shall be limited to the repair or
replacement of materials or parts as above set forth.

Table of Contents

Section : Page

1. Analysis of Air Flow Calibration
a. Physics of Measurement……………………………..
b. Accuracy of Gaseous Flow Measurements…………..

2. Principle of Operation and Features …………………….

Important Information on Version : 2

…………

3. Start Up Procedure………………………………………

4. Calibration of Air Flow Sources
with the DigiCal………………………………………...

5. Calibrator Maintenance………………………………….

6. Calibrator Verification…………………………………..

7. Power Supply……………………………………………

2
3

4-5
6

7

8

9

9

10

12

8. Precautions / Warnings………………………………….

9. Parts List ………………………………………………...

10 Service Information……………………………………...

1

10

11

12-13