V-SERIES™ Leading Edge Lanyards
Technical Data Sheet
The V-SERIES line of leading edge safety lanyards has been tested over a .005” radius steel edge -
providing a shock absorbing lanyard option for leading edge work. The easy to identify Leading Edge symbol
on the shock absorbing cover helps to make identifying lanyard type and application easier.
Additionally, the swiveling snaphooks keep your lanyard lifeline from twisting as you work –
so you can spend less time adjusting your PPE and more time focused on the job.
CAPACITY ANSI Z359.13: 130–310 lbs.
BRAND Leading Edge
SUB BRAND / MODEL NAME Standard
THREAD/STITCHING Polyester
LANYARD MATERIAL Steel Cable
ENERGYABSORBING MATERIAL Nylon
SNAP HOOK MATERIAL Aluminum
PRODUCT WEIGHT 2-4 lbs.
SHIPPING WEIGHT 3-5.5 lbs.
SHIPPING DIMENSIONS 4” x 10” x 5” or 4” x 15” x 6”
STANDARDS ANSI Z359.13, OSHA
Ordering Information
Part No. Description
10213785 MSA Leading Edge Lanyard, Single leg, Large Aluminum Swivel Snaphook
10213786 MSA Leading Edge Lanyard, Twin leg, Large Aluminum Swivel Snaphook
10213787 MSA Leading Edge Lanyard, Single leg, Small Aluminum Snaphook
10213788 MSA Leading Edge Lanyard, Twin leg, Small Aluminum Snaphook
10220700 MSA Leading Edge Lanyard, Single leg, Small Steel Swivel Snaphook
10220701 MSA Leading Edge Lanyard, Twin leg, Small Steel Swivel Snaphook
Note: This Bulletin contains only a general description of the products shown. While product uses and performance capabilities
are generally described, the products shall not, under any circumstances, be used by untrained or unqualied individuals. The
products shall not be used until the product instructions/user manual, which contains detailed information concerning the proper
use and care of the products, including any warnings or cautions, have been thoroughly read and understood. Specications are
subject to change without prior notice.
2300-309-MC / 02.2021
© MSA 2021
MSA operates in over 40 countries
worldwide. To nd an MSA oce near you,
please visit MSAsafety.com/oces.