Page 1
Advantage® 200 LS, 420
and 3200 Respirators
Advantage 200 LS Half-Mask Respirator
Comfortable Fit and Balance
Mask can be adjusted to the wearer for a
pressure points throughout the day.
Swept back cartridge design helps to provide
stability and weight distribution on the face.
Lower Total Cost of Ownership
The Advantage 200LS keeps replacement, and
maintenance costs down by only having 4 main
components.
1. Facepiece blank
2. 4-point yoke
3. Inhalation/exhalation valves
4. Head harness
4
3
1
2
Advantage 420 Half-Mask Respirator
Simplicity, Comfort and Flexibility
An important characteristic of the Advantage 420
is user-friendliness.
The innovative patent-pending single loop head
harness outshines the competition. It grants the
user an intuitional operation and oers high
comfort and exibility. The unique one-piece
over-molded silicone nose cup is soft and
pleasant to wear and extremely robust.
Advantage 3200 Full-Facepiece Respirator
Comfortable Fit and Balance
The Advantage 3200 design includes a nosecup, to help
reduce fogging in low temps or high humidity, so that
you are able to focus on the task at hand.
The wrap around scratch-resistant face piece
high-impact performance requirements.
Reduce Respirator Downtime
All components of the Advantage 3200 can be replaced
without special tools - for quick maintenance and limited
downtime of your respirator.
Page 2
Advantage 200 LS, 420 and 3200 Respirators
Advantage® Respirator Cartridges
+
The Advantage® line of particulate, chemical
and combination cartridges provides
Advantage 420 and 3000 Full-Facepiece
Advantage® Respirators.
MSA Cartridge
Description
A2 430371 2,3
A2 P3 430372
A2 B2 E1 K1 430373
A2 B2 E1 K1 P3
Low-Prole P3
P2 Snap-On
Re-Order Part
Number
430374
430375
10011347
Pack of 20 + Covers
Colour
Coding
Brown
Brown
Mustard
Mustard
White
A2 Acid Gases B2E1 K1
Organic Vapour
Chloride
Sulfur Diodixe
Chloride Dioxide
Hydrogen
Chloride
OV CL SD CD HC HS* AM MA FM HF MV P100
Brown
White
Mustard
White
White
Ammonia
Methylamine
Formaldehyde
Hydrogen
Fluoride
Mercury Vapor
P3 P2
See
Notes
Below
2,3,4
2,3,4
2,3
1,4
D
particulate aerosols free of oil; time use restrictions may apply. (P1)
against all particulate aerosols. (P2)
* Escape only. + Only with Full Facepiece
Notes 1. Do not use in atmospheres containing less than 19.5 percent oxygen, in atmospheres
containing gases or vapors or in atmospheres immediately dangerous to life and health.
2. Do not use in atmospheres containing less than 19.5 percent oxygen, or in atmospheres
immediately dangerous to life and health.
3. Do not wear for protection against organic vapors with poor warning properties or
those which generate high heats of reaction with the sorbent material in the cartridge.
4.
+ P3 with Full Facemask only.
An appropriate cartridge change-out schedule must be developed by a quali ed professional, unless the cartridge/ canister utilizes an
end-of-service-life indicator. The change-out schedule must take into account all factors that may inuence respiratory protection including
specic work practices and other conditions unique to the worker’s environment. If using against substances having poor warning properties,
there is no secondary means of knowing when to replace the cartridges/canister. In such cases, take appropriate additional precautions to prevent
overexposure, which may include a more conservative change-out schedule or using an air-supplied respirator or SCBA. Failure to follow this
warning can result in serious personal injury or death. As a reference, below is a partial list of substances having poor warning properties:
Acrolein
Aniline
Arsine
Bromine
Carbon monoxide
Diisocyanates
Dimethyl sulfate
Hydrogen cyanide
Hydrogen selenide
Methanol
Methyl bromide
Methyl chloride
Methylene chloride
Nickel carbonyl
Nitric acid
Nitro compounds
Nitrogen oxides
Nitroglycerin
Nitromethane
Phosgene
Phosphine
Phosphorus trichloride
Stibine
Sulfur chloride
Urethane or other diisocyanatecontaining paints
Vinyl chloride
MSAsafety.com
Page 3
Advantage 200 LS Half-Mask Respirator
• Thermoplastic rubber is soft and lightweight
• Nosecup design provides stability and comfort
Small Medium Large
ADVANTAGE 200 LS
FACEPIECES
430357 430356 430358 Advantage 200 LS Respirator, with 2-piece neckstrap
Advantage 420 Half Face Respirator
• Innovative design
• High comfort & exibilty
• Nosecup design is pleasant to wear and extremely robust
Small Medium Large
ADVANTAGE 420 HALF
-FACE RESPIRATOR
10102273 10102274 10102275 Advantage 420 Half Face Respirator, with single neckstrap
Advantage 3000 Series Full-Facepiece Respirators
• Integrated nosecup helps to reduce lens fogging
• Scratch-resistant, optically correct wraparound lens
• Easy cleaning and decontamination
Advantage 3200 Twin Respirator
with chemical cartridges
ADVANTAGE 3200
FACEPIECES
Twin-Port
ADVANTAGE 3100
FACEPIECES
Single-Port
10027727 10027726 10027728 Advantage 3200 Facepiece Twin-Port, with European-style harness
10027724 10027726 10027725 Advantage 3100 Facepiece, with European-style harness
Advantage 3200 Facepiece with
European-style harness
Small Medium Large
Advantage 3100 Facepiece
Flexi-Filter® Particulate Pads for Advantage Respirators
These low-prole, exible pads t well under a welding hood and with other personal protective
equipment. They oer great balance and weight distribution for maintaining a good face seal,
while their swept-back design provides improved vision and comfort.
MSA Filter Description Part No. Colour Coding
FILTER FLEXI P3- PK-2 818342
FILTER FLEXI P3 OV-PK-2 818343
FILTER FLEXI P3 NUISANCE AG/HF, PK-2 818344
Flexi-Filter® P2 Box 10 ( 5 Pairs ) 10027699
Flexi-Filter® P3 Box 10 ( 5 pairs) 10027639
White
White
White
3
MSAsafety.com
Page 4
MSA Respirator Fit Test Compliance
29 CFR Part 1910.134
RESPIRATOR
FIT TEST
697444 Bitrex Qualitative Fit Test Kit
MSA
801628 Banana Oil Qualitative Fit Test Kit
697445 Solution, Sensitivity, (Bitrex)
KITS
697446 Replacement Fit-Test (Bitrex) Solution
697447 #1 Sensitivity Nebulizer
697459 #2 Fit-Test Nebulizer
697448 Test Hood (Same for Both)
10056424 Advantage Fit Test Adapter for Quantitative Fit Testing
To meet AS/NZS’ respiratory protection
facepiece-testing kits and accessories.
methods are subjective in nature
and rely on the judgment of the test
subject, and quantitative testing
methods rely on objective data to
SPARE
PARTS
815939 Replacement inhalation/exhalation valves (30 pack)
815794 Single piece replacement head strap
816671 Replacement yolk
Cleaning Supplies
PRODUCT NAME
DESCRIPTION
MSA Clean and Clear
Pre - Moistened lens cleaning towel in sealed foil pack, designed to clean lenses on prescription spectacles, safety eyewear,
goggles, faceshields and other protective lenses such as respirator full face masks, air hoods etc.
Clear and Clean Mini Towels are anti-static. The exclusive formula cleans, clears and provides resistance to fogging.
The towels can also be used to clean personal protective equipment such as full and half face respirators, earmus etc.
The product is also useful for general cleaning and disinfecting telephones, computers screens and keyboards.
with your Respirator Program Manager
PART NO. 762485
Note: This Bulletin contains only a general description of the products shown. While product uses and performance capabilities are generally
the product instructions/user manual, which contains detailed information concerning the proper use and care of the products, including any
1012-12-MC / 05.2020
© MSA 2020
MSA operates in over 40 countries
please visit .
MSAsafety.com
Loading...