mr. steam 300, W328, W328CORD, F328, W336 Maintance Manual

Series 300 Electric Towel Warmers

Installation, Operation & Maintenance Instructions

towelwarmers

®

steam

.

mr

_________________________

Model #

_________________________

Serial #

PUR 100559 Rev. 3/11

Series 300 Electric Towel Warmers

Models W328, W328CORD, F328, W336, W336CORD, W348, W348CORD

_______________________________________ _______________________________________
Model Serial #

Table of Contents

___________________

General Information . . . . . . . . . . .3

Specifications . . . . . . . . . . . . . . . .3

Wall Preparation . . . . . . . . . . . . . .4

Mounting Dimensions . . . . . . . . . .4

Installation: W328, W336, W348 . . .5

Electrical Connections . . . . . . . . . .6

Optional Programmable Timer . . . .7

Installation: F328 . . . . . . . . . . . . .7

Installation: Cord Models . . . . . . . .8

___________________

W328

W338

WAR N I N G

!

The towel warmer is
an electric device. It must be installed by
a licensed electrician in accordance with
the National Electrical Code (NEC) and
local code.

___________________

IMPORTANT NOTE:

instructions, you will notice warning and
caution symbols. This blocked information is
important for the safe and efficient installa­tion and operation of this Towel Warmer.

These are types of potential hazards that may
occur during this installation and operation:

WAR N I N G

!

cause serious injury or death if precautions
are not followed.

CAUTI O N

!

minor injury or product damage may occur if
you do not follow instructions.

IMPORTANT NOTE:

information that is especially relevant to a
problem-free installation.

All information in these instructions are based
on the latest product information available at
the time of publication. Sussman-Automatic
Corporation reserves the right to make
changes at any time without notice.

As you follow these

states a hazard may

signals a situation where

This highlights

W348

W328CORD

W338CORD

W348CORD

F328

mr.steam

Sussman-Automatic
Corporation

[e-mail]
www.mrsteam.com

®

®

43-20 34th Street
Long Island City, NY 11101

TEL: 800 76 STEAM
FAX: [phone]

9410 S. La Cienega Blvd.
Inglewood CA 90301

TEL: 800 72 STEAM
FAX: [phone]

PUR 100559 Rev. 3/11

mr.steam®towelwarmers

Installation, Operation & Maintenance Instructions

_________________________________________________________________

HOMEOWNER:

_______________________________________________

THANK YOU for selecting Mr.Steam Towel Warmer, the perfect
addition to bathrooms, family spas, and exercise rooms within
your home. Our products have been a standard for quality and
comfort, and we are sure that you will experience continued
enjoyment from the Towel Warmer you have purchased by
following these instructions.

WAR N I N G

!

TOWEL WARMERS ARE HOT! The Towel
Warmer is an electrical heating appliance, intended only for
indoor residential applications and, as such, should be installed
and used with certain precautions for your safety.

1. INSTALLATION PROCEDURES FOR WALL-MOUNTED UNITS MUST

BE ACCOMPLISHED BY QUALIFIED PERSONNEL IN STRICT
ACCORD WITH APPLICABLE NATIONAL AND LOCAL BUILDING
AND ELECTRICAL CODES.

2. DO NOT place TOWEL WARMER units inside a shower, sauna or

steam room enclosure or any other wet location or with
elevated temperature because the towel warmer may be an
electrocution hazard.

3. CAUTION is advised when a Towel Warmer is accessible to

children because the towel warmer is hot.

4. A dedicated wall switch or timer should be used to control the

TOWEL WARMER unit. Contact Mr.Steam for an in-wall 24-hour­7 day timer (PN W-103588) Note: All switches and control
devices must be installed on the load (black) side of the Towel
Warmer circuit in compliance with the National Electrical Code
(NEC) and local code. (see page 7 for installation instructions)

IMPORTANT:

The finish of your Towel Warmer can be
protected and maintained by an occasional wiping with a soft,
non-abrasive, damp cloth and lightly polished, thereafter, with a
soft dry cloth when the Towel Warmer is cold. Under no circum­stances should abrasive cleaning powders, metal polish or chlo­rine-based cleaners be used on any part of this product.

IMPORTANT:

This appliance is for warming towels only.
DO NOT use this appliance to dry wet towels.

IMPORTANT:

This appliance is intended for towels washed in
water. Fabrics that contain soap or detergent residue may show
what appears to be scorch marks. However this may be the dis­coloration of the residue. Mr.Steam is not responsible for discolor­ing or damage of any fabrics. Refer to the Mr.Steam towel warmer
warranty for additional terms and conditions.

This picture shows the recommended
method of draping a towel on a towel
warmer. Ensure as much as possible of
the towel's surface is touching the towel
warmer for optimum towel warming.

INSTALLER:

___________________________________________________

READ THIS ENTIRE INSTRUCTION MANUAL THOROUGHLY BEFORE
BEGINNING INSTALLATION. LEAVE THESE INSTRUCTIONS WITH
HOMEOWNER.

WAR N I N G

!

BE CERTAIN ELECTRICITY IS SHUT OFF AT
MAIN PANEL BEFORE ATTEMPTING TO WIRE OR SERVICE THE
TOWEL WARMER. Follow instructions to make certain the Towel
Warmer is properly mounted and secured to the wall.
FAILURE TO FOLLOW THESE STEPS COULD RESULT IN HAZARDOUS
CONDITIONS INCLUDING ELECTROCUTION.

WAR N I N G

!

1. Install in accordance with National and local codes.

2. Do not locate in shower stall, tub or near water spray.

3. Do not locate within

the shower or tub zone.
See illustration.

4. All models are to be

protected by dedicated
and suitably rated GFCI
circuit breaker or equal.

Shower/Tub

Zone

Do not locate the
towel warmer within
the shower/tub zone

For illustrative purposes only

TO ENSURE CORRECT OPERATION OF YOUR TOWEL WARMER,
PLEASE FOLLOW ALL INSTRUCTIONS CAREFULLY, OBSERVING THE
"CAUTION" and “WARNING” NOTATIONS FOR EACH STEP.

Inspect Towel Warmer

Unpack the Towel Warmer carefully to avoid any damage or loss of
any part. When opening the box be sure that the parts are not
accidentally discarded. Towel Warmers are shipped in specially
designed shipping cartons. The entire surface of the Towel Warmer
is hand-wrapped to protect the finish. It is your responsibility to
immediately inspect for any damage.

_____________________________________________________________

_____________________________________________________________

Note: Dimensions are approximate
Note: Hard wired and cord connected models have the same dimensions, amps

and weight. Cord connected models include an integral 6 foot power cord.

TOWEL WARMER SPECIFICATIONS

Model No. Dimensions (inches) Amps Volts/Phase Weight (lbs.)

W328 20 x 31

F328 19
W336 20 x 38
W348 20 x 49

W x H x D

3

⁄8 x 43⁄4 0.82 120/1 10

7

⁄8 x 343⁄8 x 113⁄4 0.82 120/1 10

7

⁄8 x 43⁄4 1.11 120/1 14

1

⁄4 x 43⁄4 1.40 120/1 18

3