Mr. Steam CUSTEAMSTOP Specifications

mr.steam

®

Technical Specifications

CU Steam Stop

The CU Steamstop is an emergency stop switch to
electronically shut down the steam generator. Multi­ple stop switches can be used with one generator.

• Water resistant IP-69K rating suitable for use
inside or outside the steam room

• Used to turn off steam solenoid(s)

• Installation must conform to National and local
electrical codes

• Accepts ¼” & ½” NPT; M16 & M20; and PG 13.5
& PG 16 conduit and fittings

LOCATION AND INSTALLATION

The CU-STEAMSTOP shall be positioned for easy
access by the attendant or user.

WARNING

!

Disconnect all power supplies at the main
disconnect switch before proceeding with wiring
of the CU-STEAMSTOP. All electrical wiring must
be installed by a qualified, licensed electrician in
accordance with National and local codes.

ELECTRIC SHOCK HAZARD.

™

OPERATION AND USAGE

Pressing the CU-STEAMSTOP button will stop
the flow of steam into the steam room and shut
down boiler.

NOTE: When used with a Digital 1 Control, the
Digital 1 internal alarm (or CU-ALARM if equipped)
will sound if the CU-STEAMSTOP is pressed.

CAUTION

!

as soon as the CU-STEAMSTOP is reset.

FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and Maintenance
Manual or refer to the manual provided with the unit.

MODEL PROJECT INFORMATION

CU SteamStop

Steam will flow from the steamhead

Location:

Architect:

Engineer:

Contractor:

Submitted By:

Date:

Hole Marking

M16

M20

(PG 13.5)

PG 16

Fitting Drill Size

1/4” NPT 35/64”

M16 41/64”

M20 51/64”

PG 13.5 53/64”

1/2” NPT 27/32”

1/2” NPT 27/32”

PG 16 29/32”

Notes:

mr.steam

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]

®

Sussman-Automatic Corp®

[e-mail] www.mrsteam.com

TS0060 REV 7.14