Mr. Steam CT6EC1PC, CT9EC1PC, CT12EC1I3BK, CT15EC1PC, CT15EC1I3BK Specifications

®

mr.steam

CT Day Spa Packages

Technical Specifications

CT DAY SPA SYSTEM

BOX CONTENT

• iTempoPlus®Control

• Matching AromaSteam Steamhead with Acrylic Shield (

• AutoFlush®System

®

• Express Steam

• Drip Pan

• CT-SteamStop

• MSTS In-Room Temperature Sensor (

factory installed (

™

CT-PACKAGE ISTEAM

BOX CONTENT

• Steam Control

• Matching iSteam Steamhead

®

• AutoFlush

• Express Steam

• Drip Pan

• CT-SteamStop

• MSTS In-Room Temperature Sensor (

System

®

factory installed (

™

For Models CT6 to CT15

not shown

For Models CT6 to CT15

not shown)

)

not shown)

not shown)

not shown)

FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and
Maintenance Manual or refer to the manual provided with the unit.

MODEL SHAPE FINISH PROJECT INFORMATION

CT DAY SPA





SYSTEM

CT-PACKAGE





iSteam

mr.steam

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]

®

RD Round



SQ Square













N/A




Sussman-Automatic Corp®

PC - Polished Chrome

BN - Brushed Nickel

PN - Polished Nickel

ORB - Oil Rubbed Bronze

BB - Brushed Bronze

PB - Polished Brass

RAW -

Custom Plating

WH -

White

BK -

Black

[e-mail] www.mrsteam.com

Location:

Architect:

Engineer:

Contractor:

Submitted By:

Date:

Notes:

TS0052 12.14

mr.steam

2

1

/

2

”

4

1

/

2

”

1

/

4

”

3

/

8

”

3

/

4

”

1”

5”

5”

3

3

/

4

”

12” long
pigtail

®

T E CHN I C A L S P E C I F I C AT I O N S

iTempoPlus™CONTROLS

iTempoPlus™controls flush mount in the steam/shower enclosure through a

5

⁄8” wide x 37⁄8”

2

iTempoPlus™Controls Feature:

• Solid brass decorative cover
with choice of square or round
styles in designer finishes

• Digital display

• Programmable temperature

• AromaSteam steamhead in
matching finish and shape

• Compatibility with iGenie

The iTempoPlus controls are designed to be installed inside or outside
the steam room but is primarily installed inside the steam room. If the
control is installed inside the steam room the control must be located:

• 4-5 feet above the floor

• in a location representative of the desired steam bathing
temperatures. Do not locate the control above or near the
steam head or direct steam emissions.

• on a vertical wall

The control cable length is 30 feet. Insure that the control and/or
steam generator are located accordingly.

An optional 60 ft. cable is available if required, PN 103990-60.
If the control is installed outside the steam room a Remote Temperature

Probe Part Number MSTS must be installed inside the steam room.

high hole. iTempo controls can also be surface mounted.

• Soft touch keypad

• Low voltage operation

• Programmable steam bath
duration

• Clock

• ON/OFF control for AromaSteam
and ChromaSteam

®

• Two programmable presets

®

BOX CONTENTS:

iTempoPlus

•

™

Tube of Silicone Sealant

•

• Steamhead • Owner’s Manual

• Control Cable (30 ft.)

Dimensional
Information for the
round and square
controls:

FOR ILLUSTRATIVE PURPOSES ONLY.
IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com or scan the QR code before installation to download
the Installation, Operation and Maintenance Manual or refer to the
manual provided with the unit.

MODEL SHAPE FINISH PROJECT INFORMATION

MS iTempoPlus

RD Round



SQ Square



BB - Brushed Bronze



BN - Brushed Nickel



ORB - Oil Rubbed Bronze



PB - Polished Brass



PC - Polished Chrome



PN - Polished Nickel




RAW -

Custom Plating

Location:

Architect:

Engineer:

Contractor:

Submitted By:

Date:

Notes:

mr.steam

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]

®

Sussman-Automatic Corp®

[e-mail] www.mrsteam.com

TS0035 Rev 5.14

®

10:06 AM

ACCESSORIES SETTINGS

S

TAR T

mr.steam

iSteam®2.0 Control

Technical Specifications

Box Contents:

• iSteam®2.0 Control

Dimensional Information

5

6

⁄

• Owner’s Manual

• Control Cable (30 ft.)

• Rough-In Box

• Steamhead

• Optional Surface

3

4

⁄

4

”

• Tube of Silicone
Sealant Mount Gasket

iSteam controls flush mount in the steam/shower enclosure
through a 5-1/4” wide x 3-9/16” high hole. iSteam controls
can also be surface mounted. They are suitable for use with an
available iGenie®control. Available in black or white.

iSteam controls are suitable for use inside or outside the
steam/shower enclosure, featuring:

• Full color LCD touch screen

• Programmable temperature

• Programmable time

• Two user presets

• AromaSteam, ChromaSteam

and AudioWizard™controls

• Passcode to prevent uninten­tional use of steam bath

• Includes AromaSteam steam
head in white or black

• Compatible with iGenie

®

• Low voltage operation

®

Works with the iSteam®Mobile App to allow users to control
steamroom operation from their local WiFi network.

3

⁄

8

”

1

1

”

6

B

lue Cap

Control
P

igtail (8”)

ID Tag

Audio Pigtail

1

(

7

⁄

4

”

)

Wall location for

optional surface mount

f

or flush mount

W

all location

The iSteam controls are designed to be installed inside
or outside the steam room but is primarily installed in­side the steam room. If the control is installed inside
the steam room the control must be located:

• 4-5 feet above the floor

• In a location representative of the desired steam
bathing temperatures near the bather seating area.
Do not locate the control above or near the steam
head or direct steam emissions.

• On a vertical wall

The control cable length is 30 feet. Insure that the con­trol and/ or steam generator are located accordingly.
An optional 60 ft. cable is available if required, PN
104117-60. If the control is installed outside the steam
room a Remote Temperature Probe Part Number
iMSTS must be installed inside the steam room.

FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and
Maintenance Manual or refer to the manual provided with the unit.

MODEL FINISH PROJECT INFORMATION

iSteam 2.0




Black
White

Location:

Architect:

Engineer:

Contractor:

Submitted By:

Date:

Notes:

mr.steam

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]

®

Sussman-Automatic Corp®

[e-mail] www.mrsteam.com

TS0036 REV 5.14

mr.steam

®

Technical Specifications

AutoFlush

®

Box Contents

• AutoFlush Valve with Cord

• Installation instructions

Operation

The optional AutoFlush System fea­ture automatically drains the

®

Mr.Steam
A time delay allows the water to cool
down (about two hours) before it
drains by gravity for a safe and gentle
operation.

Note:

has been installed, the AutoFlush will
drain for ten minutes then refill with
fresh water to begin the pre-heat
cycle.

system following each use.

If the Express Steam®option

AutoFlush Shown Fully Assembled

Steam Generator

DO NOT TURN OR REMOVE THE DRAIN VALVE

(shown in the correct open position)

Drain Valve

AutoFlush Valve

Nipple

Plumb to
Drain Line

Our exclusive AutoFlush® automatically and electronically drains the system,

®

providing CleanSteam... Every Time

FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and
Maintenance Manual or refer to the manual provided with the unit.

MODEL PROJECT INFORMATION

MS 81500E

Notes:

mr.steam

mr.steam

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]

9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]

Location:

Architect:

Engineer:

®

®

Sussman-Automatic Corp®

Sussman-Automatic Corp®

and introduces fresh water.

Contractor:

Submitted By:

Date:

[e-mail] www.mrsteam.com

[e-mail] www.mrsteam.com

TS0011 REV 5.14

mr.steam

9”

1.5”

25”

®

Drip Pan MS 103867

Mr. Steam strongly recommends the use of
a drain pan in the unlikely event of a
plumbing leak.

Locate the drain pan on a solid level
surface and place the steam generator
inside the drain pan. Insure the steam
generator is level.

All plumbing shall be performed by a
qualified licensed plumber and in accor­dance with applicable national and local
codes. Check local plumbing code for
receptor, trap and vent requirements.
Drain pans drain by gravity.

The drain pan is equipped with an integral
3

⁄4" NPT fitting.

Technical Specifications

FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and
Maintenance Manual or refer to the manual provided with the unit.

MODEL PROJECT INFORMATION

MS 103867

Notes:

mr.steam

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]

Location:

Architect:

Engineer:

®

Sussman-Automatic Corp®

Contractor:

Submitted By:

Date:

[e-mail] www.mrsteam.com

TS0012 REV 5.14

mr.steam

®

Technical Specifications

CT-SteamStop

™

BOX CONTENT

• CT-SteamStop™Control Button

• Owner’s Manual

• 60’ CT-SteamStop Cable

FUNCTION

• Used to turn the steam room on and off from
within the steam room without having to touch
the main controller

®

• Works with both iTempoPlus

• Adhesive sticker for mounting located on the back
of the button (non-supplied silicon is required to
properly seal the wall opening).

and iSteam®controls

FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and
Maintenance Manual or refer to the manual provided with the unit.

MODEL PROJECT INFORMATION

CT-SteamStop



Notes:

mr.steam

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]

™

Location:

Architect:

Engineer:

®

Sussman-Automatic Corp®

Contractor:

Submitted By:

Date:

[e-mail] www.mrsteam.com

TS0065 12.14

®

mr.steam

Technical Specifications

MSTS/iMSTS in Room Temperature Sensor

BOX CONTENT

• MSTS/iMSTS probe with wire attached

FUNCTION

• Used to accurately read the temperature inside the steam
room and send it to the controller.

• MSTS is for use with the iTempo®or iTempoPlus®controls

• iMSTS is for use with the iSteam

1

⁄4" Minimum

1

Maximum

⁄2"

®

Control

Silicone Sealant

Probe

Finish Wall

Cable

INSTALLED REMOTE

SECTIONAL VIEW

FOR ILLUSTRATIVE PURPOSES ONLY.

visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and
Maintenance Manual or refer to the manual provided with the unit.

MODEL PROJECT INFORMATION

iMSTS



MSTS



Notes:

Location:

Architect:

Engineer:

IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

TEMPERATURE PROBE

Contractor:

Submitted By:

Date:

mr.steam

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]

®

Sussman-Automatic Corp®

[e-mail] www.mrsteam.com

TS0055 12.14