THROTTLE ENHANCER
INSTALLATION INSTRUCTIONS
1. Before beginning installation, be sure the engine
compartment has cooled down sufficiently to work on vehicle.
2. Refer to the vehicle manufacturer service manual to locate the
throttle position sensor on engine.
3. Disconnect wire harness connector from the throttle
position sensor.
4. Install Throttle Enhancer in-line between throttle position sensor
and wire harness, make sure connections snap into place.
Use tie-straps or convoluted tubing to secure or protect
electrical wires.
5. Test drive vehicle, when throttle reaches 60%, throttle enhancer
changes the voltage signal to the ECU (electronic control unit),
advancing ignition timing and optimizing air/fuel ratio.
The result is faster throttle response.
6. The throttle enhancer is 50 state legal.
©2000
Printed U. S. A.
Cleveland, OH
www.mrgasket.com
THROTTLE ENHANCER
INSTALLATION INSTRUCTIONS
1. Before beginning installation, be sure the engine
compartment has cooled down sufficiently to work on vehicle.
2. Refer to the vehicle manufacturer service manual to locate the
throttle position sensor on engine.
3. Disconnect wire harness connector from the throttle
position sensor.
4. Install Throttle Enhancer in-line between throttle position sensor
and wire harness, make sure connections snap into place.
Use tie-straps or convoluted tubing to secure or protect
electrical wires.
5. Test drive vehicle, when throttle reaches 60%, throttle enhancer
changes the voltage signal to the ECU (electronic control unit),
advancing ignition timing and optimizing air/fuel ratio.
The result is faster throttle response.
6. The throttle enhancer is 50 state legal.
©2000
Printed U. S. A.
Cleveland, OH
www.mrgasket.com
THROTTLE ENHANCER
INSTALLATION INSTRUCTIONS
1. Before beginning installation, be sure the engine
compartment has cooled down sufficiently to work on vehicle.
2. Refer to the vehicle manufacturer service manual to locate the
throttle position sensor on engine.
3. Disconnect wire harness connector from the throttle
position sensor.
4. Install Throttle Enhancer in-line between throttle position sensor
and wire harness, make sure connections snap into place.
Use tie-straps or convoluted tubing to secure or protect
electrical wires.
5. Test drive vehicle, when throttle reaches 60%, throttle enhancer
changes the voltage signal to the ECU (electronic control unit),
advancing ignition timing and optimizing air/fuel ratio.
The result is faster throttle response.
6. The throttle enhancer is 50 state legal.
©2000
Printed U. S. A.
Cleveland, OH
www.mrgasket.com
THROTTLE ENHANCER
INSTALLATION INSTRUCTIONS
1. Before beginning installation, be sure the engine
compartment has cooled down sufficiently to work on vehicle.
2. Refer to the vehicle manufacturer service manual to locate the
throttle position sensor on engine.
3. Disconnect wire harness connector from the throttle
position sensor.
4. Install Throttle Enhancer in-line between throttle position sensor
and wire harness, make sure connections snap into place.
Use tie-straps or convoluted tubing to secure or protect
electrical wires.
5. Test drive vehicle, when throttle reaches 60%, throttle enhancer
changes the voltage signal to the ECU (electronic control unit),
advancing ignition timing and optimizing air/fuel ratio.
The result is faster throttle response.
6. The throttle enhancer is 50 state legal.
©2000
Printed U. S. A.
Cleveland, OH
www.mrgasket.com
Loading...