MREL Blaster's Ranger II LT Quick Start Manual

Lt

QUICK START GUIDE

1 2 3

B

A

A: EXTEND TRIPOD LEGS.
B: POSITION GRIP BALL HEAD.

ROTATE GRIP BALL HEAD
UNTIL SECURE ON TRIPOD.

SECURE THE MOUNTING ADAPTER ON TO CAMERA.
ENSURE A TIGHT FIT.

4 5

USING THE MOUNTING
ADAPTER SECURE THE
CAMERA TO THE TRIPOD.

REMOVE THE LENS COVERS FROM BOTH THE
CAMERA AND THE LENS THEN ATTACH THE
CAMERA LENS TO THE CAMERA AND TWIST
INTO PLACE.

6 7 8

OPEN THE SIDE DOOR AND INSERT THE SD CARD. INSERT THE I/O CABLE.

CONNECT THE
TRIGGER CABLE
TO THE I/O CABLE.

9 10

CONNECT AC ADAPTER TO A

POWER SOURCE AND THEN INSERT

THE POWER CABLE INTO THE CAMERA

CONNECT THE ETHERNET

CABLE BETWEEN CAMERA AND LAPTOP

13

OPEN FASMOTION OR
ANY BROWSER, FIND THE
CAMERA AND SELECT THE
SUITABLE FRAME RATE
AND RESOLUTION

11

12

14

POWER ON THE CAMERA

PRESS THE TRIGGER SWITCH AND THE SUBJECT WILL BE VIDEO RECORDED.

15

REVIEW THE VIDEO WITH THE ABOVE BUTTONS ON THE LAPTOP
SCREEN. WHEN READY PRESS THE SAVE BUTTON.

APERTURE

ZOOM

FOCUS

SET THE APERTURE TO THE LOWEST
NUMBER AND THEN ADJUST THE ZOOM, APERTURE AND FOCUS
ON THE LENS TO OBTAIN THE PERFECT PICTURE

16

PRESS THE DESTINATION BUTTON AND CHOOSE THE SD CARD.
PRESS THE SAVE BUTTON TO SAVE THE VIDEO.