MREL BlastCam 2G Color, BlastCam 2G Mono Quick Start Manual

QUICK START GUIDE

1 2 3

B

A

A: EXTEND TRIPOD LEGS.
B: POSITION GRIP BALL HEAD.

ROTATE GRIP BALL HEAD
UNTIL SECURE ON TRIPOD.

REMOVE THE LENS COVERS FROM BOTH THE CAMERA AND THE
LENS THEN ATTACH THE CAMERA LENS TO THE CAMERA AND
TWIST INTO PLACE.

4

SECURE THE MOUNTING ADAPTER ON TO THE BOTTOM OF
THE LENSE. ENSURE A TIGHT FIT.

7

8

5 6

B

USING THE
MOUNTING
ADAPTER SECURE
THE CAMERA
AND LENSE TO
THE TRIPOD.

A: MOUNT THE BLASTCAM™

CONTROLLER MOUNT TO THE TRIPOD.

B: POSITION ON THE MOUNT THE

BLASTCAM™ CONTROLLER.

A

9

CONNECT THE BLASTCAM™ INPUT CABLE TO
THE BACK OF THE BLASTCAM™

CONNECT ONE END OF THE ETHERNET
COMMUNICATION CABLE TO THE BACK OF
THE BLASTCAM™

CONNECT THE OTHER END OF THE
ETHERNET COMMUNICATION CABLE
TO THE BLASTCAM™ CONTROLLER

10 11 16

CONNECT THE TRIGGER
CABLE TO THE INPUT
CABLE.
(IF YOU DO NOT INTEND
TO USE THE IMAGEBLITZ
MOTION TRIGGER).

AC POWER: CONNECT THE POWER

CABLE ADAPTOR TO THE INPUT CABLE.

DC POWER: CONNECT THE DC

POWER CABLE TO THE INPUT CABLE.

PRESS THE TRIGGER BUTTON IF USING THE TRIGGER SWITCH OR
IN THE B
RECORD BUTTON TO START RECORDING.

LASTCAM™ CONTROLLER SOFTWARE,

THE CLICK THE

12 13

DOUBLE CLICK

THIS ICON ON
POWER ON THE
BLASTCAM™
CONTROLLER

THE DESKTOP

OF THE BLASTCAM™

CONTROLLER

14

THE FOLLOWING SCREEN WILL LOAD ON THE
CONTROLLER. SETUP THE RECORDING SPEED, RESOLUTION, AND
TRIGGERING METHOD. CLICK THE LIVE BUTTON TO ENTER LIVE MODE.

BLASTCAM™

15

17

THE SUBJECT WILL BE VIDEO RECORDED.

18

POWER ON THE BLASTCAM™ CONTROLLER IF IT IS IN SLEEP MODE,
PRESS RECONNECT BUTTON TO CONNECT IF NEEDED.
THE USER CAN NOW PLAYBACK THE VIDEO FOR REVIEW.

SET THE APERTURE TO THE LOWEST
NUMBER AND THEN ADJUST THE ZOOM, APERTURE AND FOCUS
ON THE LENS TO OBTAIN THE PERFECT PICTURE

19

APERTURE

ZOOM

FOCUS

THE USER CAN NOW PROCESS THE VIDEO AND/OR IMAGES AND
EXPORT THE VIDEO AND/OR IMAGES.