MRCOOL MPG60S108M414A User Manual

The Signature Series is NOT designed for amateur installation. Installation SHOULD be performed by an authorized technician.

Please read this manual carefully before installation and keep it for future reference.

User’s Information

Manual

Signature Series

Gas Heating/Electric Cooling

Package Unit

The Signature Series is NOT designed for amateur installation. Installation SHOULD be performed by an authorized technician.

Please read this manual carefully before installation and keep it for future reference.

USER’S INFORMATION MANUAL

Package Unit

Save these instructions for future reference

Congratulations...

...your outdoor heating/cooling package unit is a valuable
piece of equipment, designed and manufactured by the most
modern methods. Proper care of your unit should result in
many years of service and comfort.

To keep your operating c osts low and to eliminate
unnecessary service calls, we have provided a few
guidelines. These guidelines will help you understand how
your heating/cooling unit operates and how to maintain it
so you can get years of safe and dependable service. Read

future reference.

WARNING

FIRE OR EXPLOSION HAZARD

– Do not store or use gasoline or other

rofslaunamllapeekdna,launamsihtnisnoitcurtsniehtlla

TABLE OF CONTENTS

IMPORTANT SAFETY INFORMATION.................2

OPERATING YOUR UNIT.....................................3

MAINTENANCE OF YOUR UNIT..........................4

FILTER .................................................................5

BURNER FLAME ..................................................6

Manufactured By

MRCOOL LLC

Hickory, KY 42051

*F507302-C*

(P) 507302-01C

507302-01C Page 1 of 6mrcool.com

WARNING

IMPORTANT SAFETY INFORMATION

automatically lights the burners. See OPERATING
YOUR UNIT on page 3 for information on lighting and

shutting down the unit.

OR EXPLOSION HAZARD

Failure to follow the safety warnings exactly could
result in dangerous operation, serious injury,
death, or property damage.

Improper servicing could result in dangerous
operation, serious injury, death, or property
damage.

• Before servicing, disconnect all electrical
power to unit.

• When servicing controls, label all wires prior
to disconnecting. Reconnect wires correctly.

• Verify proper operation after servicing.

For your safety, read the following before operating your
gas heating/electric cooling package unit:

1. The area around the unit must be kept clear and
free of combustible materials, gasoline, and other

4. Should the gas supply fail to shut off or if overheating
occurs, shut off the gas valve to the unit before
shutting off the electrical supply.

5. Do not use the unit if any part has been under water.
A flood-damaged unit is extremely dangerous.

inspect the unit and to replace all gas controls, control
system parts, electrical parts that have been wet, or
the unit if deemed necessary.

6. Examine the unit installation to determine that:

such as the vent hood, are clear and free of
obstructions.

B. Return air duct connection(s) is physically sound

and sealed to the unit casing.

C. Physical support of the unit is sound without

sagging, cracks, gaps, etc.

D. There are no obvious signs of deterioration of

the unit.

2. This unit requires air for combustion and ventilation to
ensure both proper and safe operation. Combustion
air is brought in through the condenser section. Do
not block or obstruct the condenser coil or condenser
fan opening.

3. This unit is equipped with an ignition device which

E. Burner flames are in good adjustment (see

Burner Flame beginning on page 6).

7. It is important that you conduct a physical inspection of
the unit at least twice a year. It is also recommended

agent at least once per year.

Page 2 of 6 507302-01Cmrcool.com