Mr. Coffee IDS55, IDS57, IDS59-4, IDS60 Operating Instruction
for
MR.
COFFEE MILL
Enjoy these features:
l Round stainless steel grinding chamber grinds more
evenly than oval chambers.
l
Spacious chamber grinds enough beans for 12 cups
of coffee.
l
Carefully designed Safety Switch protects you by
preventing operation unless the lid is properly in place.
l
Convenient Deep Lid lets you transfer freshly ground
coffee directly to your brewer.
FOR H OU SEH OLD U SE ON LY
PAGE 1
COFFEE”
When using electrical appliances, basic safety precautions should always be
followed including the following:
1.
READ ALL I NST R U CTI O N S.
2.
To protect against risk of electrical shock, do not put coffee mill in water
or other liquid.
3.
Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts,
and before cleaning.
5.
Check stainless steel bowl for presence of foreign objects before using.
6. Do not contact moving parts.
7.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or is damaged in any manner. Return appliance to the
nearest authorized service center for examination, repair or electrical or mechanical
adjustment.
8.
The use of attachments not recommended or sold by the appliance manufacturer
may cause fire, electrical shock or injury.
9.
Do not use outdoors.
10. Do not let cord hang over edge of table or counter, or touch hot surfaces.
11. This product is designed FOR HOUSEHOLD USE ONLY, not for commercial or
industrial use.
12.
PRECA U TI ONS
l
Do not remove Cover until blade has
st o ppe d.
l
Do not attempt operation without the cover being in place.
l
Do not immerse the motorized base or blade in liquid, or place in dishwasher.
Damage to unit will occur if submerged in liquid. Only the transparent top cover
may be immersed.
l
Do not operate this machine
for more than 4 batches. Allow machine
to cool down for 10 minutes after every 4 batches.
l Do not attempt to chop ice.
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician. Do not attempt to modify the
plug in any way.
SAVE THESE INSTRUCTIONS
PAGE 2
Com p le h iy
continuosly
Section Page
#
Important Safeguards ...............................................
Diagram of Parts
.......................................................
Introduction ...............................................................
How To Grind the Beans
......
.................................
..
Coffee Measurement Chart .......................................
Grinding Time.. .......................................................
Grinding
Cleaning
If Service
Tips
.............................................................
......................................................................
is
Required.. ...............................................
Limited Warranty .......................................................
French Translation
FIGURE A
ON/OFF SAFT
TRANSPARENT
COVER
.....................................................
STAINLESS STEEL
GRINDING BOWL
CH
, BLADE
CORD
/zyxwvutsrqponmlkjihgfedcbaZYXWVUTSRQPONMLKJIHGFEDCBA
.2
-3
.4
4
.4
.4-5
.5
5
.5
.6
.7
PAGE 3
1.
Remove the cover and fill the grinding bowl with coffee beans according to the
following chart:
COFFEE MEASUREMENT CHART
BEAN QUANTITY
= GROUND COFFEE
= CUPS OF COFFEE
tablespoons/coffee scoops
in tablespoons
5 oz. cups
3 tbls.
1
l/2
scoops
3 tbls.
2 cups
5
tbls.
2 1/2
scoops
5
tbls.
4
cups
6
tbls.
3 Scoops 6
tbls.
6
Cups
8 tbls.
4
scoops
8 tbls. 8 Cups
10
tbls.
5
scoops
10 tbls.
10 cups
11 tbls.
5
l/2
scoops
11 tbls.
12 cups
Unlock the fresh ground
flavor of
roaste new MR. COFFEE
coffee mill. For the best results, please read the following instructions before you begin
using this appliance.
1. Before you plug in your coffee mill, wipe the stainless steel grinding bowl, blades
and cover with a lint free cloth.
2.
Use this coffee mill to grind only coffee beans. Residue from grinding other foods
will combine with the delicate oils of the coffee beans and affect the flavor of your
coffee.
Note: This coffee mill grinds up to
11 tablespoons of whole
coffee beans.
2.
Place the cover on the
coffee mill.
3. Plug in unit
4.
Hold the cover firmly into
place (Figure B.) Be sure
that the safety switch is
in its track in order to
operate this unit.
5. Press down on the
safety switch according
to the
following
grind
time chart::
TIME CHART FOR GRINDING COFFEE BEANS
TYPE OF GRIND LEVEL TABLESPOON
GRIND TIME
Perc/Regular
Grind
11
Drip Grind
11
Espresso Grind
6
For smaller batches of beans use less grind time.
9 seconds
15
seconds
12
to 15 seconds
PAGE 4
1
)
Loading...