MP Pumps FLOMAX 40 User Manual

FLOMAX® 40

4" x 4" Self Priming Centrifugal Pump

FLOMAX® 40 self-priming centrifugal pumps are capable of creating
vacuum sufficient to lift liquids from heights up to 25 feet above the source.
Once primed, the pump's built in flapper valve will maintain a full column of
liquid in the suction line.

A FLOMAX® 40 PumPAK® is a fully assembled and run tested pump end
that can be easily coupled to a number of drivers such as 215JP frame
motors and gas engines. A bearing pedestal is also available for T-frame
motor or belt drive.

Standard features include stainless steel drive sleeve, stainless
steel fasteners, renewable wear plate, and a semi-open dynamically
balanced impeller. Options include double grease-lubricated
seals, stainless steel impeller and seals for all types of abrasive and/or
corrosive services.

The FLOMAX® series of pumps are commonly used in Industrial, OEM,
Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire
Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and
Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks,
Bulk Transfer Pumps and much more.

SPECIFICATIONS:

Application:

Agricultural•
Industrial•
Marine•
OEM•

Features:

Renewable wear plate•
Stainless steel drive sleeve•
Stainless steel fasteners•
Up to a 25' suction lift•

Suction and Discharge . . 4" x 4" NPT
Materials of Construction Cast iron

Flow . . . . . . . . . . . . . . . Up to 750 GPM

Head Feet . . . . . . . . . . . Up to 225'

Impeller . . . . . . . . . . . . 7.75" max diameter - semi open

Max Solid Size . . . . . . . .65"

Motor . . . . . . . . . . . . . . Up to 50 HP

Drive Options . . . . . . . . Pedestal

PumPAK® (without motor)

Seal . . . . . . . . . . . . . . . Special seal material combinations available

(consult factory).
Standard carbon / ceramic / Viton

FLOMAX® 40

8062-D