MP Pumps CHEMFLO 8 User Manual

CHEMFLO® 8 HYDRAULIC

3" x 1-1/2" End Suction Centrifugal Pump

Made with high quality investment cast 316 stainless steel components,
the ChemFlo® series of pumps are designed to be applied in a wide range
of pumping applications where stainless steel is required.

The ChemFlo® 8 hydraulic pumps utilize an enclosed impeller designed for
achieving higher heads and efficiencies than a standard semi-open
impeller. Multiple hydraulic flows allow the ChemFlo® 8 to meet most duty
points up to 395 GPM and total head up to 305 feet. Several mechanical
seal options are available in addition to the standard type 2100 carbon /
ceramic / Viton mechanical seal.

ChemFlo® 8 hydraulic pumps are offered with a 1.59 cubic inch
displacement motor for hydraulic flows up to 26 GPM and a maximum
pressure of 2400 PSI.

SPECIFICATIONS:

PSI . . . . . . . . . . . . . . . . Up to 134

Suction and Discharge . . 3" x 1-1/2" 125# ANSI flange
Materials of Construction 316 stainless steel

Stainless steel

Flow . . . . . . . . . . . . . . . Up to 395 GPM

Head Feet . . . . . . . . . . . Up to 310'

Impeller . . . . . . . . . . . . 8.0" enclosed, cast 316 stainless steel

Drive Options . . . . . . . . Hydraulic motor 1.59 cu. in.

Seal . . . . . . . . . . . . . . . Special seal material combinations available

(consult factory)

Standard carbon / ceramic / Viton

Application:

Agricultural•
Commercial•
Industrial•
Marine•
OEM•

Hydraulic Fluid Flow:

Up to 26 GPM•

Hydraulic Motor:

Gear•

Hydraulic System Pressure:

Up to 2400 PSI•

Options:

Hydraulic motors with flow control•

CHEMFLO® 8 HYDRAULIC

Chem 8