MP Pumps CHEMFLO 4 User Manual

CHEMFLO® 4 HYDRAULIC
2" x 1-1/2" End Suction Centrifugal Pump
Made with high quality investment cast 316 stainless steel components, the ChemFlo® series of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required.
The ChemFlo 4 hydraulic pumps utilize a semi-open impeller design to allow for passage of larger solid sizes than similar sized enclosed impellers. Several seal options are available in additon to the standard type 2100 carbon / ceramic / Viton mechanical seal.
ChemFlo® 4 hydraulic pumps are offered with .22 or .37 cubic inch displacement gerotor motors for hydraulic flows up to 10 GPM and a maximum pressure of 2500 PSI.
Further expanding the versatility of the ChemFlo® series is the CFB 4 pump, a ChemFlo® 4 in NiBrAl material. All wetted parts are produced in CA 958 nickel aluminum bronze including the drive sleeve to maximize corrosion protection in seawater applications.
SPECIFICATIONS:
Application:
Agricultural• Commercial• Industrial• Marine• OEM
Suction and Discharge . . 2" x 1-1/2" NPT Materials of Construction 316 stainless steel
CFB (nickel aluminum bronze)
Flow . . . . . . . . . . . . . . . Up to 240 GPM
Head Feet . . . . . . . . . . . Up to 100'
Impeller . . . . . . . . . . . . 4.5" semi-open, cast 316 SS
Drive Options . . . . . . . . Hydraulic motor .22 cu. in.
Hydraulic motor .37 cu. in.
Seal . . . . . . . . . . . . . . . Special seal material combinations available
(consult factory)
Standard carbon / ceramic / Viton
Hydraulic Fluid Flow:
Up to 10 GPM
Hydraulic Motor:
Gerotor
Hydraulic System Pressure:
Up to 2600 PSI
Options:
Hydraulic motors with flow control
CHEMFLO® 4 HYDRAULIC
Chem 4
+ 3 hidden pages