MP Pumps CHEMFLO 2 User Manual

CHEMFLO® 2 HYDRAULIC

1-1/2" x 1" End Suction Centrifugal Pump

Made with high quality investment cast 316 stainless steel components, the
ChemFlo® series of pumps are designed to be applied in a wide range of
pumping applications where stainless steel is required.

The ChemFlo® 2 hydraulic pumps utilize a semi-open impeller design to
allow for passage of larger solid sizes than similar sized enclosed
impellers. Several mechanical seal options are available in addition to the
standard type 2100 carbon / ceramic / Viton mechanical seal.

ChemFlo® 2 hydraulic pumps are offered with .22 or .37 cubic inch
displacement gerotor motors for hydraulic flows up to 10 GPM and a
maximum pressure of 2600 PSI.

Further expanding the versatility of the ChemFlo® series is the CFB 2
pump, a ChemFlo® 2 in NiBrAl material. All wetted parts are produced in
CA 958 nickel aluminum bronze including the drive sleeve to maximize
corrosion protection in seawater applications.

SPECIFICATIONS:

Application:

Agricultural•
Commercial•
Industrial•
Marine•
OEM•

PSI . . . . . . . . . . . . . . . . Up to 125

Suction and Discharge . . 1-1/2" x 1" NPT
Materials of Construction 316 stainless steel

CFB (nickel aluminum bronze)

Flow . . . . . . . . . . . . . . . Up to 160 GPM

Head Feet . . . . . . . . . . . Up to 280'

Impeller . . . . . . . . . . . . 5.25" semi-open, cast 316 stainless steel

Drive Options . . . . . . . . Hydraulic motor .22 cu. in.

Hydraulic motor .37 cu. in.

Seal . . . . . . . . . . . . . . . Special seal material combinations available

(consult factory)

Standard carbon / ceramic / Viton

Hydraulic Fluid Flow:

Up to 10 GPM•

Hydraulic Motor:

Gerotor•

Hydraulic System Pressure:

Up to 2600 PSI•

Options:

Hydraulic motors with flow control•

CHEMFLO® 2 HYDRAULIC

Chem 2 hyd