MPPC SimPedal Limited Lifetime Warranty
Who is covered:
This warranty is extended to the original end-use purchaser or the person receiving the product as a gift, and is also to be extended to any other
person or transferee who purchases the product second hand.
What is covered/for how long:
MPPC SimPedals are warrantied for the lifetime of the product from the date of retail purchase by the original end-use purchaser or second
hand purchaser. Main Performance PC, LLC warrants that this product, when delivered to you in new condition, in original packaging, from
a Main Performance PC, LLC authorized reseller or distributor and used in normal conditions, is free from any defects in manufacturing,
materials and workmanship.
What is not covered:
This warranty does not cover defects resulting from improper or unreasonable use or maintenance; failure to follow operating instructions;
accident; excess moisture; insects; lightning; power surges; connections to improper voltage supply; unauthorized alteration or modification of
original condition; damages caused by inadequate packing or shipping procedures; loss of, damage to or corruption of stored data; damages
caused by use with non-Main Performance PC, LLC products; product that requires modification or adaptation to enable it to operate in any
country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these
modifications; and products purchased from unauthorized dealers.
What we will do:
During the limited lifetime warranty period, we will, at our sole option, repair or replace (using new or refurbished replacement parts) any
defective parts within a reasonable period of time and free of charge.
What we will not do:
Pay shipping, insurance or transportation charges from you to us, or any import fees, duties and taxes.
What you must do to obtain Limited Lifetime Warranty Service:
Return product, with proof of purchase from an authorized Main Performance PC, LLC dealer or reseller, using the following procedures:
1. Contact the Main Performance PC, LLC organization in your country/region (visit your distributor or resellers website for return information
if outside the United States) for specific return and shipping instructions. In the United States, please contact Main Performance PC direct. Do
not return the product without prior authorization from the reseller/distributor.
2. Label and ship the product, freight prepaid, to the address provided by the Main Performance PC reseller or distributor organization in
your country.
3. Place any necessary return authorization number prominently on the outside of the carton. Cartons not bearing a return authorization
number, where required, will be refused.
Other conditions:
THE PROVISIONS OF THIS LIMITED WARRANTY ARE IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESSED OR IMPLIED,
WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. MAIN
PERFORMANCE PC, LLC’s MAXIMUM LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE
PRODUCT. IN NO EVENT SHALL MAIN PERFORMANCE PC, LLC BE LIABLE FOR LOSS OF, DAMAGE TO OR CORRUPTION OF
STORED DATA, OR FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES HOWSOEVER CAUSED INCLUDING
WITHOUT LIMITATION THE REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING, PROGRAMMING
OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH YOUR MAIN PERFORMANCE PC, LLC PRODUCT.
This warranty is void if the label bearing the serial number has been removed or defaced.
Other legal rights:
This limited warranty gives you specific legal rights, and you also may have other rights that vary from state to state or country to country. Some
places do not allow limitations on implied warranties or the exclusion or limitation of incidental or consequential damages, so the above limitations
or exclusions may not apply to you.
Safety Instructions
1. Read these instructions.
2. Keep these instructions – for future reference.
3. Heed all warnings – on the product and in the owner’s guide.
4. Follow all instructions.
5. Do not use this product near water or moisture.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. To ensure reliable operation of the product and to protect it from overheating, put the product in a position and location that will not interfere
with its proper ventilation.
9. Do not install near any heat sources, such as radiators, heat registers, stoves, or other product that produce heat.
10. Do not defeat the safety purpose of the polarized or grounding-type plug of the USB cable provided.
11. Protect the USB cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from
or connect to the product.
12. Only use attachments/accessories specified by the Manufacturer.
13. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles.
14. Do not let objects or liquids enter the product – as they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock.
15. No naked fire sources, such as lighted candles, should be placed on the product.
16. The mains plug is used to disconnect the device and it shall remain readily operable. To completely disconnect the power input, the main
plug of the product shall be disconnected from the device.
17. If power is applied and the LED is not illuminated when required (during calibration procedure), please send the unit for service to the
manufacturer.
WARNING: To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.
WARNING: The product shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on
the product, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a
Fire hazard.
OUR COMMITMENT TO YOU
We take great pride in the design, quality and performance of each of our products, with the goal of providing the highest amount of enjoyment possible in
the price range of that product. We believe that you will be thrilled with any of our growing product lines, and our focus on quality and service is second to
none.
Our reputation rests on our promise to provide you with the best service and warranty possible. That is why the warranty for this Main Performance PC
product is fully transferrable should you wish to sell or transfer ownership. The warranty follows the product, not the consumer.
"PlayStation 3", "PlayStation 4" are trademarks of Sony Computer Entertainment Inc.
"Thrustmaster", is a registered trademark of Guillemot Corporation
"Logitech", is a registered trademark of Logiech Corporation
"Fanatec" is a registered trademark of Endor® AG/Germany.
"Microsoft", "Xbox 360", "Xbox One" and "Xbox" are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries.
When you purchase any product from Main Performance PC, we encourage you to compare it, as we have, to competitive products in our industry. We
believe that this process will enhance your appreciation and show the true value in the product you have purchased from us.
Best wishes from all of us at Main Performance PC for many years of enjoyable gaming,
Michael Main
USB CABLE
7/16
IN THE BOX
1/8
3/161/2
3/32
REQUIREMENTS
PC:
Windows XP, 7, 8
USB Port
Xbox 360TM, Xbox OneTM, Playstation 3TM,
Playstation 4
Thrustmaster: Wheels
Logitech:
Fanatec
T500
TX
G25
G27
All Fanatec
TM
SPACING ADJUSTMENT
HEIGHT ADJUSTMENT
3/32
3/16
USB CABLE (PC ONLY)
- Route USB Cable between pedal arm and mounting pivot
as tagged
DIRECT WHEEL CONNECTION
- Plug the blue end of the appropriate cable for your wheel
into your SimPedals.
- Plug the other end of the cable into the appropriate pedal
port on your wheel.
CALIBRATION
- Press and hold the
Calibration/Mode button for 5
seconds. The indicator lights
will ash several times and
begin to "sweep" back and
forth.
- Press each of the 3 pedals
down fully and release.
- Press and hold the
Calibration/Mode button for 5
seconds.
- The pedals are now calibrated
and calibration is saved even if
power is removed. You can
calibrate the pedals as often as
you would like.
WHEEL MODE SELECTION
- Turn the wheel on.
- Press and release the Calibration/Mode
button on the pedals until the
appropriate mode for your wheel is
chosen.
Modes:
LED 1 - Thrustmaster
LED 2 - Fanatec
LED 3 - Logitech
- When you see the appropriate LED blink,
the mode is saved and your pedals are
ready to be used with your wheel.
PRESSURE ADJUSTMENT
1/2
7/16
SUPPORT
www.mainperformancepc.com/support-center/
1-877-677-2798 ext.7
TRAVEL ADJUSTMENT
1/2
1/8
! ! RE-CALIBRATE AFTER ADJUSTING TRAVEL ! !
Loading...