MPow BH462A User Manual
MPOW WINGS
NECKBAND WIRELESS EARPHONES
MODEL: BH462A
We are appreciated for purchasing our Mpow Wings.
This guide contains instructions for setting up and using
your Mpow Wings easily.
Package List
VIP
×1
×1×1 ×1
（Size M is preinstalled on earbuds）
×1×1
Diagram
Volume- / Previous Volume+ / Next
ON/OFF
Charging Port
MFB
Multifunction Button(MFB)
Earbuds Retract Button(L)
Earbuds Retract Button(R)
MFB
R
L
LED indicator
Microphone
How To Pair
Settings
Bluetooth
Bluetooth
DEVICES
Settings
Bluetooth
Bluetooth
DEVICES
Mpow Wings
Connected
Range < 1m
01
Bluetooth connection steps
1. Keep your headset and device as close to each other
as possible, less than 1 meter is better.
2. Switch to “ON”, wait for few seconds, the LED will flash
red and blue alternately, which means that it is ready
for pairing.
3. Turn on Bluetooth on your device and find the headset’s
name “Mpow Wings”.
4. Click “Mpow Wings”, Bluetooth headset will get
connected with your device automatically. Input 0000
if it requires a password.
02
Pair the headset with 2 devices
1. After successfully pairing with one device, turn off the
Bluetooth of the device and switch the button of
“Mpow Wings” to “OFF”.
2. Follow the same steps as above to get your 2nd device
paired with the Bluetooth headset.
3. Turn on the Bluetooth of the 1st device, and then
choose “Mpow Wings” .
4. Now, both devices have been connected with
Mpow Wings.
Note:
1. The headset will automatically reconnect to the
last-time paired and used device.
2. If it does not automatically reconnect, you can delete
"Mpow Wings" on the Bluetooth list of your device, and
then re-pair.
Power ON / OFF
Call
ON OFF
ON OFF
1
X
Click Once
Hold on 1s
Redial / Mute
Siri / Music / Volume
Hold on 1s
Click Once
(Call mode)
2
X
Double click
1
X
Click Once
Redial
1
X
Mute
Siri
(Standby / Music)
Hold on (1-2s)
1
X
Click Once
Hold on (1-2s)
1
X
Click Once
Reset
Hold on 5s
When the earbuds are on, simultaneously press and hold the volume
up button and MFB button for 5 seconds. The LED will be steady on
for 2 seconds, which means it is reset successfuly.
Charge
Output : 5V
Charging
Tips
The correct way to retract the wire
To prolong the lifespan of the headset, please hold the wire with
your hands to make it retract slowly when you press both
Earbuds Retract Buttons. You can follow the steps shown below.
1. Hold the wire with your hands.
2. Press both Earbuds Retract Buttons with your forefingers.
3. Slowly retract the wire.
4. Press both Earbuds Retract Buttons again to let the rest of
the wire and earbuds to retract.
CORRECT DISPOSAL OF THIS PRODUCT
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature,indicate
that it should not be disposed with other household wastes
at the end of its working life.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.Household user should
contact either the retailer where they purchased this product, or
their local government oce, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contact. This product should not
be mixed with other commercial wastes for disposal.
Notification
1.
Please fully charge it if it was going to lay idle for a long
time and place it in a cool and dry place. Please recharge
it each 2 months for storage.
2.
Please fully charge it for the first use.
FCC STATEMENT
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
The wrong way to retract the wire
Directly press both Earbuds Retract Buttons. In this way, the
earbuds will hit the headset aggressively.
100%1%
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
Loading...