Mpman SP100 BT User Manual
70 70 70 70 70
There is built-in lithium battery in this product, please pay
attention below note.
Your produ ct s ar e ma de o f th e high -q ualit y
mater ial s an d com ponen ts and ca n be re cycle d
for re us e. Notic e t hat clas sifie d c ollec tion sys tem
of the lo ca l elect ric appli anc es o r el ectronic
pro ducts . If the p rod ucts which package s inc lude
cro ss an d recy cling box sym bol , the y should be
pro cesse d accordi ng to th e local reg ulati ons, do
not disc ard th e prod uct s as comm on house hold
rubbi sh.
This is to certify that SP100BT is in conformity with:
council directive R&TTE
EN 62479:2010
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
EN 300 328 V1.7.1
For mor information please visit our website
www.mpmaneurope.com
cable is connected to the speaker. This will auto set the
speaker to AUX Input Mode. When the speaker is used in
AUX mode you will only be able to control the music
Volume Up/Down from the speaker.
Low Voltage Warning
The indicator light will flash green when the power is too
low, and also some noise. Please re-charge the speaker. If
re-charging is not started, the speaker will switch off
automatically once there is no battery life to power the
speaker.
Form of Special Functions on Buttons
Pair to Mobile Phone Situation
There may be some differences in different units which have bluetooth function, it is better to study your unit instruction before pair
operating. And your unit must support agreement of AVRCP.
V01
STATUS
SDANDBY
UNCONNECTED
PAIR
CONNECTED
PLAYING
MUSIC
PAUSE
MUSIC
CALLING
ON PHONE
ON
PHONE
PLAY/PAUSE
SHORT
PRESS
NC
NC
NC
Play
Pause
Play
Answer
Ring off
VOLUME UP VOLUME DOWN
SHORT
KEEP
PRESSING
PRESS
Up one
stage
Up one
stage
Up one
stage
Up one
stage
Up one
stage
Up one
stage
Up one
stage
Up one
stage
Continued
Continued
Continued
Continued
Continued
Continued
Continued
Continued
NC
NC
NC
Play the
last one
Play the
last one
Play the
last one
Refuse
NC
KEEP
PRESSING
up
up
up
up
up
up
up
up
SHORT
PRESS
Down one
stage
Down one
stage
Down one
stage
Down one
stage
Down one
stage
Down one
stage
Down one
stage
Down one
stage
KEEP
PRESSING
Continued
Down
Continued
Down
Continued
Down
Continued
Down
Continued
Down
Continued
Down
Continued
Down
Continued
Down
Instruction on Product Safety Maintenance
Do not place this product under the high-temperature
and damp environment and make it be caught by rain
or impacted by strong force.
If this product gives out smoke or encounters other
exceptions, quickly plug off the DC-USB power
cablePlug to avoid accidents and contact local franchiser
or dial the seller for repair.
The audio signal cable and power cable can not be
pulled, tied, extruded, trampled or suspended with
heavy objects to avoid damage to the insulation layer of
the audio signal cable and USB power cable, which will
lead to short circuit or bad contact.
Please power off this product when it is not operated
for a long time.
This product is compatible with normal smart phone
and MID tablet,but if your device is special or pair with
this product by some special program,there may be
some function cannot work well.
114
Wireless SpeakerBluetooth
● SP100BT Wireless Bluetooth Speaker................................. 1 set
● User Manual ................................................................................ 1 copy
● 3.5mm Stereo Audio Cable ............................................... 1 piece
● Standard USB Mix Mini USB Power Cable ............... 1 piece
If the materials inside the package are not consistent with the
accompanied list, please contact the manufacturer or retail seller
who you purchased the unit from.
P7
70 70 70 70 70
Manual
SP100BT
Wireless Bluetooth
Speaker
Production Introduction Product Features
Thank you for purchasing our Bluetooth speaker system. This
product supports Bluetooth 2.1+EDR, a greater range of
mobile phones, smart phones, tablets, laptops and various
other Bluetooth enabled devices. Our modern design users
the latest in electronic technology to produce a high end
music experience and still keep its ultimate portable features
with its built-in rechargeable lithium battery and remote
control.
Please read the following instructions carefully before
operating the product. Keep them safe for future reference.
● Graceful sound quality, petty body but great sound volume.
● Decorous& fashionable facade.
● The latest blue-tooth technology, wide be used.
● Control the music playing between speaker and mobile
phone or other equipments with Bluetooth.
● Support lots of sound sources input.
● USB power supply or power adapter, built-in rechargeable
lithium battery, very easy to use.
● Support answer calling.
Technical Parameters
● Mono Output
● Power Output：3W
● Speaker Unit：2＂ 3Ω3W
● Frequency Response：100Hz～18KHz
● S/N Ratio：≥70dB
● Bluetooth Standard: 2.1+EDR
● Bluetooth signal power：CLASS II
● Supports: A2DP，AVRCP，HFP，HSP and etc.
● Signal Distance：8 - 10M
● Power： DC5V 500mA
● Built-in Battery: 3.7V 400mAH, rechargeable lithium battery.
● Playing Time: 7 hours ( middle volume)
● Product Size (D*H): 64X67 mm
● Weight: 173 g
6
4
5. Power On/Off
6. Mini USB DC In
7. AUX in Jack
8. Speaker Unit
9. MIC
1.Play/Pause
2. Volume Up
3.Volume Down
4. Indicate Light
8
9
7
3
1
2
5
How to Operate.
Charge Up
Connect the supplied power 5V 500mA, indicate light red,
it is charging up, till light put out, finish.
※ Charge up in OFF situation, 3 hours can be full of; if in
ON/WORKING situation, more or less 5 hours.
※ Please charge up before use this product.
ON/OFF
Turn On：Push the button to ON position, indicate light is
shining.
※ There will be different color shine on the indicate light if
this product start Bluetooth mode or AUX in mode. Please
check below instruction：
Activate Mode Change
This product support Bluetooth mode and AUX in mode,
and can change to each other easy.
If the 3.5 mm jack of Audio cable insert the speaker, AUX
mode is acquiescent; if not, Bluetooth mode is starting.
Bluetooth Mode
Turn on the speaker in Bluetooth mode, indicate light
coruscate between blue and green,
· Pair： To pair the speaker with a Bluetooth device, the
speaker is ready to be paired with when you turn on it
and keeping 6-8 seconds. Activate the Bluetooth on your
mobile phone or other devices you want to pair. The
name to be searched is SP100BT. Once found, select and
point it, you get it when the indicate light coruscate slowly;
(If pass word is required, input the access code "0000" to
complete the pairing.)
·Operation： After pairing is completed, you will be able
to play music from you Bluetooth player wirelessly to the
speaker. You will be able to control the functions with the
PLAY/PAUSE, VOLUME UP/DOWN buttons, and also be
able to answer/refuse your calling.
· Connecting device memory: When you turn on the
speaker in Bluetooth mode, it will connect with the device
which work with it last time automatically. If the device is
out of effective range, pair procedure start.
Note： 1. Bluetooth mode will disconnect automatically if
the speaker has not been used for a long period
time. The speaker will revert to sleep mode so you
would need to pair the two devices again.
2、There may find there are some differences in
between in setup with some Bluetooth devices. We
advise you read these instructions carefully before
pairing starts.
AUX Input Mode
The indication light will show a green color when an AUX
114
Loading...