Mpman QH100 QUICK GUIDE

Hard Disk Multimedia Player QH100

U

r

M

se

Hard Disk Multimedia Player

QH100

anual

Hard Disk Multimedia Player QH100

Table of Contents

※Product features

※Safety and Other Instructions

※Product Specification

※Product Contents and Descriptions

※HDD Installation

※Network-based Data Sharing with a PC

※HDD Partition Setup and Format (Win2000/XP)

※Video Cable Connection

※Audio Cable Connection

※Remote Controller

※Setup Menu Setting

※Main Menu Screen

※Movie Play

※Music Play

※Photo Play

※Virtual DVD

※Firmware Upgrade

※Firmware Recovery

※Trouble shooting

- 1 -

Hard Disk Multimedia Player QH100

● ● ● PRODUCT FEATURES ● ● ●

PLAYER is network-based Home Media Center which ,
with a built-in 3.5’ high-capacity HDD, can play various media
files(e.g.movies,MP3,photos,etc.) through a TV and, if
connected to a PC, can also play shared movie files via the
network.

·Multi-codec MPEG Player

·Digital Music Jukebox

·Digital Photo Album

·10/100M Home Network

·Analog and Digital Output

·USB Host Play

- 2 -

Hard Disk Multimedia Player QH100

● ● ●

SAFETY AND OTHER INSTRUCTIONS ● ● ●

Pls use the products after carefully reading the following instructions.
Particularly , pls give more attention to warning parts.

>>> Copyrights

Software, audio, video, or any intellectual
properties are protected by copyright and
international laws.
It is user s responsibility when s/he
reproduces or distributes the content(s)
created by this product.

>>> Codec Check

This product may not support some media
codec formats. Please check the available
codec types. Moreover, even with a
supported codec, some files may not be
played because of file property or system
environment.

>>> Data Backup

Please backup the data stored in this
product in a safe place. We are not
responsible for any data loss or damage.

>>> Drop / Shock

Do not give a shock or drop the product.
This may cause a severe problem of the
product.

>>> Foreign Substance

Do not insert any metal (e.g., coin, hairpin
etc.)or inflammable foreign substances into
the interior. This may cause a damage to
the circuit or a fire.

>>> Disassembly / Modification

Do not attempt to disassemble or modify
any part of the product. It may cause a
severer problem of the product and any
product modification may void the warranty.

>>> Load

Do not place any heavy object on the top of
the product. This may cause a product
damage or a injury.

>>> Chemicals

Do not clean the product using chemicals or
cleansers. This may cause a damage to the
surface of the product.

>>> Water / Moisture

Do not contact the product with water or
liquid. This may cause a fire or electric
shock. If any conductive liquid enters the
product, turn off the product and disconnect
the power cable immediately.

>>> Magnet or Magnetic Properties

Do not place the product near an object with
a strong magnetic field. This may cause a
malfunction of the product or damage to the
stored data.

>>> Heat

Do not place the product under the direct
sunlight or near a heat source. Do not also
keep the product for long time in high
temperature.

>>> Vision / Hearing

- 3 -

Hard Disk Multimedia Player QH100

Do not watch a TV or hear loud sound for

hearing problem.

long time. This may cause a vision or

>>> Fire

During the use of the product, if you detect
smoke or an unusual smell, turn off the
product and disconnect the adapter
immediately, and request A/S.

>>> Children / Infants

Do not let children or infants touch the
product.

>>> Power

Do not use many electronic products with a
single outlet. Firmly insert the power plug. In
the middle of the use, do not unplug the
product unnecessarily. After using the
product, turn off the product and disconnect
the adapter.

This may cause an injury.

● ● ● PRODUCTS SPECIFICATION ● ● ●

Video

Codec MPEG1/2/4,DivX,XviD,WMV9(max 1920*1080)
Format WMV, AVI,

MPG,DAT,,VOB,IFO,ISO,TP,TRP,TS

Audio MP3,WMA,AAC,WAV,AC3,DTS down mixing/Pass through

Supported

Codec

Photo JPEG
Video output Composite/S-Video

HDMI(480p(576p),720p,1080i ,1080p,)

Component (480i(576i),480p(576p),720p,1080i)
Audio output Analog(Stereo),Coaxial, Opticals(5.1ch)
Network 10/100 Mbps

USB Interface USB2.0 Host port x2 (support USB hub)

Connections

HDD File

FAT32/NTFS
System

HDD Type

3.5’ SATA and IDE hard disk

Dimensions 187(W)*193(H)*60(L)mm

General

Temperature 0-60

Power Adapter 12V 3.5A AC/DC Adapter free voltage

(AC100-240V,50-60Hz)

- 4 -

Hard Disk Multimedia Player QH100

● ● ●

PRODUCT CONTENTS & DESCRIPTIONS● ● ●

PLAYER/ Remote Controller /Batteries/ A/V Cable/Adapter/Power Cable/ CD/Manual

- 4 -

Hard Disk Multimedia Player QH100

● ● ●

PART DESCRIPTIONS ● ● ●

1. LCD Condition Display Window

PLAYER s current condition is displayed on this window

2. Wireless Connection LED

- 5 -

Hard Disk Multimedia Player QH100

When the wireless connection is established, it turns on

3. LAN Connection LED

When the LAN connection is established, it turns on

4. HDD Operation LED
When the HDD is in use, it turns on.

5. USB Connection LED
It displays the connection condition of

cable to the USB device.

6. Remote Control Signal Receiver

This sensor receives signals from the remote controller. Use the controller
aiming it. Do not block this sensor

7. Power LED
When power On,it turns on

8. Power Button
Power On/Off.

9. Setup Button

Enter/Exit the setup menu

10. Stop Button
For stopping the current playback

11. Play Button
It plays a selected file.

12. OK Button

It selects a menu or plays a selected file

13. Power Input Terminal

Connect the provided adapter to this Terminal (DC 12V/3.5A)

14. USB HOST Port

An external HDD, ODD, memory stick etc. can be connected to this port.

15. LAN Cable Connection Port

A LAN cable is connected to this port .

16. HDMI Video Output Terminal

A HDMI cable is connected to this terminal .The product can be connected to a digital TV
with a HDMI cable.

17. COAXIAL Digital Audio Output Terminal

You can enjoy 5.1 Channel sound by connecting the product to a home theater amp or
receiver using a coaxial cable.

18. OPTICAL Digital Audio Output Terminal

You can enjoy 5.1 Channel sound by connecting the product to a home theater amp or
receiver using an optical cable.

19. S-Video Video Output Terminal

S-Video cable is connected to this terminal for the connection to a TV.

20. Component Video Output Terminal

- 6 -

Hard Disk Multimedia Player QH100

A component video cable with a red, blue, and green terminal is connected to this terminal.
When using this connection, the TV output of the player should be set to be supported by
your TV.

21. Composite Video Output Terminal

A composite cable is connected to this terminal for the connection to a TV.

22. Stereo Audio Output Terminal

These terminals are for analog stereo output.

● ● ● HDD INSTALLATION ● ● ●

Please install the player according to the following instructions.

- 7 -

Hard Disk Multimedia Player QH100

1. Press the lateral buttons at the same time and slide the hard disk bracket out

2. Fit the bracket with the hard disk well

3.

Connect SATA cable and power cable.

4.Set right the two plastic strips to protect hard disk drive from moving.

5.Slide the hard disk bracket in and make sure the buttons fit the holes well.

6. ok

- 8 -

Hard Disk Multimedia Player QH100

7. Press the lateral buttons at the same time and slide the hard disk bracket out

8. Fit the bracket with the hard disk well

9.

Connect SATA cable and power cable.

10.Set right the two plastic strips to protect hard disk drive from moving.

11.Slide the hard disk bracket in and make sure the buttons fit the holes well.

12. ok

● ● ●

Network-based Data Sharing with a PC● ● ●

1. LAN Cable connection between PLAYER and a PC

1.1 Connection to a PC

You can use any cable for the connection (either a direct or cross cable can be used)

Tip: If you have a previous LAN card connected to Internet, you may add
additional LAN card to connect PLAYER to the PC.

1.2 Connection using a HUB (or Internet Router)
For the connection to a hub or internet router, use a direct cable, Connect the LAN

- 9 -

Hard Disk Multimedia Player QH100

port of PLAYER to a LAN port of the hub or Internet router using a LAN cable.

Note:

To be connected to PLAYER,a PC (Notebook) should have a 10/100Mbps LAN card.
Either a cross or direct LAN cable can be used for the connection. You can buy one
of these cables in online shopping malls or PC stores near your place.

2. Network-based Data Sharing with a PC
After the LAN cable connection, according to your system environment, set up
windows networking as follows.

To establish the network communication between PLAYER and your PC, in general,
two requirements should be satisfied.

1) Folder sharing and security setup

2) Using same IP address band and Subnet Mask

2.1 Data Sharing Setup for Windows 98/SE/ME

1. Select a folder your want to share and select “Sharing” menu using the
mouse right button.

- 10 -

Hard Disk Multimedia Player QH100

2. Check “Sharing” and type “[Share Name]. EX my movie”

WARNING!

1) “Share name” should be less than 12 English Alphabets.

2) Set Access Type to Ready-Only.

3) Do not give passwords

3. If the folder is share, you will see a hand mark on the folder icon.
My Movie

4. Go to “Control Pannel-Network” and ,among the displayed items, select

“ TCP/IP-LAN card name ”

Warning
You can find the LAN card name under “Device Manager—Network Adapter”.

- 11 -

Hard Disk Multimedia Player QH100

5. After checking “Specify an IP address ” enter your IP address and subnet
mask. Then click “OK”.
Ex) IP Address : 192.168.1.3
Subnet Mask : 255.255.255.0

WARNING!
If your PC already has “Obtain IP address automatically ” checked and the IP is
auto matically assigned from an internet router or DHCP server, You may not
need this setup.
If you want this IP setup, please obtain an available IP address and subnet
mask from the router manufacturer or DHCP service provider.

- 12 -

Hard Disk Multimedia Player QH100

6. Configure PLAYER’s network environment. After pressing “SETUP” buttom,
select “IP SETUP” among the “NETWORK” setup items and IP address
and subnet mask.
Ex) IP Address : 192.168.1.10
Subnet Mask : 255.255.255.0

After finishing the setup, save the setup value by pressing the “Setup” button once
again

WARNING!
If IP address of your PC is automatically assigned by an internet router or
DHCP server, You may not need this setup. In this case, set “IP SETUP” to Auto.
Then the IP will be automatically assigned.

If you want a manual setup, please obtain an available IP address and subnet

- 13 -

Hard Disk Multimedia Player QH100

mask from the router manufacturer or network administrator.

2.2 Data sharing setup for Windows2000

1. Select a folder your want to share and select “Sharing” menu using the
mouse right button.

2. Check “Sharing” and type “Share Name” Ex) My Movie

WARNING!
“Share Name” should be less than 12 English Alphabets

3. In the above screen, click on “Permissions” and check of an everyone
account exists. If not, add one by clicking on “Add” button.

Note : Set permissions to Read- Allow

- 14 -

Hard Disk Multimedia Player QH100

4. If the folder is share, you will see a hand mark on the foloder icon.

MY Movie

5. Go to “Control Pannel—Administrative Tools—Computer

Management—Local Users and Group” and, among the displayed items,
double –click the Guest item.

- 15 -