2. Firmly hold the device with both hands and the front panel facing down.
3. Push the back cover up with your thumbs until it disengages from the device and then slide it up to remove.
To install the SIM card
The SIM card contains your phone number, service details, and phonebook/ message memory.
1. Remove the battery if it is installed.
2. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out the card slot.
3. Slide the SIM card completely into the slot.
Note: Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees
for this service.
To install the battery
Your device comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-specified original batteries and accessories. Battery
performance depends on many factors, including network configuration, signal strength, and usage patterns.
Warning: To reduce risk of fire or burns:
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire or water.
• Do not expose to temperatures above 60°C (140°F).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local regulations.
1. Align the battery’s exposed copper contacts with the battery connectors at the bottom part of the battery compartment.
2. Insert the contacts side of the battery first and then gently push the battery into place.
3. Replace the back cover.
To remove the battery
1. Make sure your device is turned off.
2. Remove the back cover.
3. The bottom of the phone has a notch. Lift the battery by the notch to remove it.
To install a memory card
To have additional storage for your images, videos, music, and files, you can purchase a memory card and install it into your device.
1. Make sure that your device is turned off, and then remove the back cover.
2. Locate the memory card slot on the upper part of the exposed right panel.
3. Insert the memory card into the slot with its gold contacts facing down until it clicks into place.
Note: To remove the memory card, press it to eject it from the slot.
Charging the Battery
New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform
best after several full charge/discharge cycles.
Note: Only the AC adapter and USB sync cable provided with your device must be used to charge the device.
Connect the USB connector of the AC adapter to the sync connector on your device, and then plug in the AC adapter to an electrical outlet to start charging the
battery.
As the battery is being charged while the device is on, a charging icon appears in the title bar of the Home screen. After the battery has been fully charged, a full
battery icon appears in the title bar of the Home screen.
Warning: • Do not remove the battery from the device while you are charging it using the AC or car adapter.
• As a safety precaution, the battery stops charging before it overheats.
Security code
·PIN code: A personal identification number of the SIM card, provided by the network operators.
·PIN2 code: PIN2 code is also provided by network operators.If you consecutive input the wrong PIN code (SIM card will be lock) and PIN2 code for three
times, you need to input corresponding PUK code and PUK2 code to unlock. For details, please contact with your network operator.
·PUK code:To change the PIN code, the PUK code is needed (that is private unlock password). PUK code and SIM card are also provided by network
operators. If the PUK code is missed, please contact with your network operator.
Commonly used functions
Power on / off
1.Long press power button to turn on or off you mobile.
2.The machine supports two GSM network SIM cards. When two SIM card inserted, and the SIM card PIN code is activated, you should input the correct PIN
code to log in.
3. Right after the mobile is power on, it will automatically search the network, if authorized network is founded, the network name and signal strength will be
displayed, or you can only use some emergency call or other non communication function.
Make a call
In home screen, click the icon at the left bottom to start a virtual keyboard, click on the numeric button to input the number, click the delete button to delete a
number, long time click the delete button to delete all numbers, click on the dial key to make the call.
During calling process, you can pull up the [dialing keyboard] at the bottom to bring up the dialing interface, in which you can make a new call.
1.Dial fixed telephone extension: some fixed telephone extension cannot be direct connected, you need to dial the operator, and press the left side of the mobile
phone [menu button] to go to the options menu, then select "P/W" (pause/wait), and then dial the extension number.
2. Make an international call: to make an international call, long time click number key [0] until international telephone prefix symbol "+" is displayed, this will
allow you select an international telephone prefix number (for example, China is 0086) , with this code, you can make the call.
Answer a call
When you receive a phone call, the incoming voice call screen will appear, allowing you to either answer or ignore the call.
1. To answer an incoming call, slide ‘ANSWER’ (Green icon) button rightward.
2.If earphone plugged, you can answer the call by pressing button on the earphone.
3. During the calling process, you may adjust the volume by pressing the side key.
4. To answer an incoming call, slide ‘ANSWER’ (Green icon) button rightward.
5. When no SIM card inserted, you can make emergency calls. Different network uses different emergency number. For details, please refer to your network