Mpman PC25HD User Manual

PC25HD

Preface

Thanks for your selection of this digital video camera. The user’s manual shall be

carefully read and put in a safe place before application for further reference.

T he contents covered by this manual refer to the latest information when this manual is

compiled. The screen display, illustration and other instructions in this manual are used to

more specifically and directly describe the operation of this video camera . O wning to the

difference of technical development and production batch, they may be a little different

from the digital video camera actually used by you.

Description

The video camera shall be used according to the following order.

Check the power supply

of the video camera

Insert and format the

memory card

Recording / picture taking

Connect to the computer

Note: if it is a newly bought memory card or a card has been used in other

digital camera/ video camera is adopted by this camera, it shall be firstly formatted

by this video camera. Before formation, the backup of important data shall be made

in other media , such as soft disk, hard disk and CD.

Instruction

Instruction for

The video camera has no memory, SD memory card and MMC card (multi-media

memory card) can be used. SD memory card has writing protection switch which is to

prevent delete or formatting of image files.

for

for use

use

Install the driver

Metal foots of memory card

Writing protection switch

Push the switch on the SD memory card to the bottom and then the data will be protected.

Push the switch on the SD memory card to the top and then the writing protection will be

cancelled. Before picture taking, please push the switch on the SD memory card to the

top.

Application

Application description

●

● The performance of the memory card will be debased after application for several

● The memory card is precise electronic device. It is forbidden to bend, fall down or

●

● The memory card shall be kept clean and liquid is not allowed to touch the card. If

●

● Please notice that the memory card will become hot after long-time application,

●

description

description of

When newly bought memory card is used or the memory card has the data that can

not be identified by the video camera or images shot by other video camera, the

memory card must be formatted at first.

The power supply of the video camera shall be cut off before inserting or taking the

memory card out.

times. If the performance of the memory card is debased, a new one shall be

bought.

let the memory card bear heavy pressure.

It is forbidden to put the memory card in the environment with strong electric field

or magnetic field, such as the propinquity of the amplifier or TV receiver.

It is forbidden to use or put the memory card in the environment that is too hot or

too cold.

the memory card touches liquid, please make it dry by soft dry cloth.

When the memory card is not used, it shall be put in its case.

which is completely normal.

I t is forbidden to use the m emory card that is used in other digital video camera or

digital camera . The memory card to be used in th is camera shall be formatted at

first by the video camera.

I t is forbidden to use the memory card that is formatted in other digital video

the

of the

the memory

memory

memory card

card

camera or card reader of a memory card.

● If one of the following situation occurs, the record data may be damaged:

-The memory card is improperly used.

-When recording, delete (formatting) or reading, the power supply is cut off or the

memory card is taken out.

●

It is advised to copy the important data in other media, such as soft disk, hard disk

and CD.

Maintenance and care of the video camera

When the video camera is not used, it shall be kept in dry and dark place and the battery

must be taken out.

● The wrist sling shall be kept during application to avoid sliding.

●

Proper protective case shall be used to prevent damage on camera lens and display

If the surface of camera lens is cleaned, the dust on the surface shall be blew away

at first and then use cloth or paper suitable for cleaning optical equipment to lightly

wipe the camera lens. If necessary, detergent can be used to wipe the camera lens.

It is forbidden to use organic solvent to clean the video camera.

● It is forbidden to touch the surface of the camera lens with fingers.

System

required

System

required

System

System required

required

When th is digital video camera is operated or used, the lowest system requirement to the

computer for the video camera shall be referred .Westrongly recommend you to use

better computer to operate the video camera to exert the best function of the video camera.

The following is the lowest system required :

System required

Operation system Microcode Windows 2000,

Central processing unit

Memory More than 128 MB

Sound card, graphic card

CD-ROM H igher than 4 quad speed

Hard disk Remaining space is more than 1 GB

Others One standard USB 1.1 or USB 2.0 interface

Performance

Performance features

The video camera has several features and functions:

●

Fittings

After opening the package of the video camera, you can see the following main fittings:

features

Digital video camera

Digital camera (five-million pixels)

Mass Storage (Movable disk)

PC Camera (camera)

8-time digital zoom

Higher than Intel PIII667 or the CPU with equal

performance

The sound card and graphic card support DirectX8 or

higher version

XP,

VISTA ,Windows 7

USB connective cable Installation CD User’s manual

TV cable Li- battery

Brief

introduction

Brief

introduction

Brief

Brief introduction

introduction of

Display screen Menu key Power key

the

appearance

the

appearance

of the

the appearance

appearance

C amera key

Zoom key

Working indicator light Direction key OK key

Recording key Playback key Shortcut key delete

USB interface TV interface

H DMI interface

Portrait indicator light

LED fill light

Camera lens

W rist sling button

Wrist sling

Trumpet

Microphone

Function

keys

and

indicator

lights

the

video

Function

keys

and

indicator

lights

Function

Function of

of keys

keys and

and indicator

indicator lights

Key/Indicator

Key/Indicator light

Power key Power on and off the camera.

Recording key R ecord image.

Camera key Take photos.

Zoom key Digital zoom, zoom in/out photo ( playback mode).

Menu key Open/close the menu.

Playback key

Up key

Down key

Left key

Right key

OK key Confirm , play and stop the play.

Shortcut key delete

key

Working indicator

light

Portrait indicator

light

Start

Start to

to use

use

light

Function

light

Function

light Function

Function

Enter/exit playback mode.

Select menu and move photos (when the photo is enlarged).

Pause the play.

Select menu and move photos (when the photo is enlarged) ，

close the screen

Select file and menu, open the fill light and move photos

(when the photo is enlarged).

Select file and menu, move photos (when the photo is

enlarged). C amera mode shift.

Enter shortcut key delete state.

It will shine once when picture taking and will shine

constantly when the disk is moved as it is connected with the

computer.

The light will shine during count down the process during

portrait.

lights of

of the

the

video

the video

video camera

camera

Battery

installation

Battery

installation

Battery

Battery installation

installation

The video camera uses four AAA alkaline batteries or original rechargeable lithium

battery. Before the battery is replaced, the power supply of the video camera shall be cut

off.

Open the battery cover and insert the battery due to the indication of positive and

negative poles in battery bin. Then close the battery cover.

SD/MMC

SD/MMC memory

Open the battery cover and insert the metal feet of SD/MMC memory card into the

groove of memory card according to the indication nearby the card groove. If the memory

card needs to be taken out, please press the SD/MMC memory card to take it out.

Note: ● Before replacing the memory card, the power supply of the video camera

Open

Open the

Open the LED outward to let the LED display screen face toward you.

Open

Press the power supply for two seconds and then release, the video camera will be started.

Mode

Mode shift

Under picture taking/recording mode, press the playback key to shift to playback mode

from picture taking/recording mode. Under playback mode, press the playback key to exit

playback mode.

Recording

Under recording mode, press the recording key to start recording and press the recording

key again to stop the recording.

Picture

Picture taking

Under picture taking mode, press the camera key to take photos.

memory

card

memory

memory card

shall be cut off.

●

The card shall be inserted with the correct direction . P roper stress shall be

adopted when the card is inserted to prevent damage of the card or parts of

video camera. If the card can not be inserted, please check whether the

direction is correct.

● When the memory card is used for the first time or has been used in other

video camera, it shall be formatted at first.

the

screen

the

screen

the screen

screen

shift

taking

installation

card

installation

card installation

installation

+ 19 hidden pages