Mpman MPQC-1030 Instruction Manual

For Model No.

MPQ

C1030

EN

User's manual

Tablet Part

Name function

Power

Reset Tablet will force to shutdown

Earphone jack

USB Port

HDMI Port

ESC

Mic

Micro SD Port

Keep pressed to turn on/off the tablet; shortly

press to activate standby

Connect earphone to this standard 3.5mm jack

PC connection through USB cable (for example

keyboard, USB device)/battery charge through

the supplied adaptor

Connect with HDMI device

/

/

Insert a micro SD card (up to 32GB)

Getting Started

Battery Charging

The tablet has a built-in rechargeable Li-polymer battery.

1. To charge connect the AC power adapter to the micro USB jack on

the right side of the tablet

2. The battery icon shows the battery status and charging status

3. The tablet can be used even if the battery is being charged.

the above icons indicate the different level of electricity left in the battery

4. no replacement of battery without authorization, or the explosion

hazard might happen.

5. Recharge it for at least half hour if it has been idle for long time and

fails to start itself.

6. Regularly recharge it at least one time monthly

7. 40°—5° is the optimum temperature for the battery recharging or

the battery performance might deteriorate slightly

Disposal

the battery might contain the polluting material, please give it to the official

.

recycling-station before disposing the tablet pc, and don’t litter.

Po

wer ON/OFF

ON:

press the

button for continuous 5 seconds until the tablet turns “ON”.

OFF:

1.Press

the button for continuous 5 seconds and it will appear

2.Select OK to power off the tablet

Screen Lock

This feature locks the screen, at the same time turn OFF the screen’s

backlight after a few seconds.

Screen locks when:

1.

System is idle.

2.

Manually activated by pressing the Power button once

Scre

en unlock :

e screen

Hom

.

The Home screen will look similar to the picture below. It is actually five

screens, each of which can have a different layout of icons. To switch

between screens, simply slide your finger left or right across the display.

The status bar and navigation buttons are always visible, no matter which

Home screen you can currently viewing.