MPIO MG200 User Manual
MG200
Thank you for purchasing MPIO product. This product is a digital audio player
that enables users to play back music conveniently and utilize it for various
purposes. To use this product properly, make sure to read through this manually
before using it.
http://www.mpio.com
For more information on the MPIO products, visit our web site on the Internet. You
can nd many answers to the customer’s various enquiries, or upgrade the product
performance through rmware upgrade (system software) that operates this product.
2
Copyright
- MPIO holds patent, trademark, and other intellectual property right about this User’s
Manual. Imitating all or part of software of this product, and duplication, reproduction, or
interpretation without a prior consent with MPIO is prohibited. Making the electronic
media version and the mechanical abridgement of the contents are also prohibited.
Trademark
- Microsoft, Windows, Windows Explorer, and Windows logo are the trademark or regis
tered trademark of Microsoft Corporation.
- Intel and Pentium are the registered trademark of Intel Corporation.
- Macintosh and Macintosh are the registered trademark of Apple Computer, Inc.
- Products and products described in this manual are the trademark or registered
trademark of the corresponding company or organization, and ™ or ® mark not always
displayed explicitly.
Disclaimer
- Manufacturer and sales ofce do not bear any responsibility over the accidental damage
that accompanies the injury to the user, which is caused by improper usage of this
product.
The contents of this manual are based on the product status at the time of sales and
can be changed without a prior notice for continuous performance improvement and
additional function supplementation in the future.
3
Safety Precautions
The following information is for protecting the user’s safety and any property damages.
Please read the following information and use the product accordingly.
- Do not use in high temperature (near heating device or heat generators).
- Do not use in minus zero temperatures or outdoors during winter
(operating temperature 0˚C~40˚C).
- Do not leave in humid areas or frequently ooding areas.
- Do not leave in dusty areas.
- Do not leave inside vehicles or under direct sunlight.
- Avoid shaky areas.
- Avoid magnetic objects.
- Avoid strong impact to prevent disassemble or data loss.
- Never disassemble, repair or reorganize.
- Be careful of foreign substances entering the product interior. E.g.) Paper clips, paper,
water, drinks, etc.
- When removing foreign substances from the product surface, always use a soft cloth or
a towel. Do not use chemical solvents.
- When removing foreign substances from the product surface, always use a soft cloth or
a towel. Do not use chemical solvents.
- To avoid electric shock, do not use this device during a lightning storm or whenever the
electrical power grid is unstable.
4
User Safety
1. Trafc Safety
- Do not listen to music using headphones or earphones when riding a bicycle, motor
cycle or driving a vehicle. It is dangerous and it may be against the law in some regions.
- Reduce the headset or earphone volume when listening to music or FM while you’re
walking. There is a risk of an accident.
2. Hearing Protection
- Do not use headphones or earphones for a long period of time. Professionals suggest
that long use of all portable audio devices may have a possibility of causing hearing
loss.
Data Storage
1. MPIO Co., Ltd. will not be responsible for data loss or damages occurred while trans
ferring data between the product and a PC.
2. When storing important data, please make a back-up copy. The data may be
damaged due to malfunction or other elements such as outer impact or lack of
battery. Please note that in case of data loss, MPIO Co., Ltd. will not be respon
sible for the lost data.
3. When inserting/removing the USB plug into a computer, please do so by holding the
plug.
4. When the product is connected to a computer, please do not cause impact or shake
theconnector.
5. You should back up the data saved in the product before requesting the after service.
MPIO will consider that the customers have backed up their data before sending it to
MPIO for after service. MPIO will not back up your data upon receiving the after service
request.
Additionally, MPIO will bear no responsibility over data loss during the service.
5
Contents
7
8
11
19
20
6
At a Glance: MPIO MG200
Connecting and Disconnecting MG200
Using MG200
Settings
Appendix
At a Glance: MPIO MG200
Display window
Power/Play/Pause button
Enter button
Fast Rewind/Previous track
Fast Forward/Next track
Menu
Record button
Headphones port
SD card cover
Mic
Volume up
Hold switch
Volume down
Reset
USB connector port
Section repeat
Repeat
Storage icon
Folder name
Play / Pause /
FF / REW icon
Lock icon
Volume
EQ
Battery status
Song number
/ Total songs
Song title
Progress status
Song time
7
Loading...