How it Works
MPIO
Loading...
FY600
User Manual
37 pgs8.69 Mb0
User Manual [de]
37 pgs8.73 Mb0
User Manual [es]
37 pgs9.04 Mb0
User Manual [fr]
37 pgs8.73 Mb0
User Manual [it]
37 pgs8.77 Mb0
User Manual [ko]
44 pgs10.42 Mb0
User Manual [nl]
37 pgs8.73 Mb0
User Manual [pt]
37 pgs8.72 Mb0
User Manual [ru]
37 pgs8.98 Mb0
User Manual [tr]
37 pgs8.74 Mb0
User Manual [zh]
37 pgs10.32 Mb0

MPIO FY600 User Manual

Download
FY600
User’s Manual
Introduction of
2 3
Thank you for purchasing MPIO FY600. FY600 is a digital audio player that enables users to play back music conveniently and utilize it for various purposes. To use this product properly, make sure to read through this manually before using it.
For more information on the MPIO products, visit our web site on the Internet. You can find many answers to the customer’s various enquiries, or upgrade the product performance through firmware upgrade (system software) that operates this product.
Copyright
- MPIO holds patent, trademark, and other intellectual property right about this User’s Manual. Imitating all or part of software of this product, and duplication, reproduction, or interpretation without a prior consent with MPIO is prohibited. Making the electronic media version and the mechanical abridgement of the contents are also prohibited.
Trademark
- Microsoft, Windows, Windows Explorer, and Windows logo are the trademark or registered trademark of Microsoft Corporation.
- Intel and Pentium are the registered trademark of Intel Corporation.
- Macintosh and Macintosh are the registered trademark of Apple Computer, Inc.
- Products and products described in this manual are the trademark or registered trademark of the corresponding company or organization, and ™ or
R
mark not always displayed
explicitly.
Disclaimer
- Manufacturer and sales office do not bear any responsibility over the accidental damage that accompanies the injury to the user, which is caused by improper usage of this product. The contents of this manual are based on the product status at the time of sales and can be changed without a prior notice for continuous performance improvement and additional function supplementation in the future.
Getting Started
The following information is for protecting the user’s safety and any property damages. Please read the following information and use the product accordingly.
Safety Precautions
4 5
Do not use in high temperature (near heating device or heat generators).
Do not use in minus zero temperatures or outdoors during winter (operating temperature 0˚C~40˚C).
Do not use in high humidity or places of dropping in water.
Do not use in places with high amount of dust.
Do not use in direct sunlight or inside a car.
Do not use in places with high vibration.
Do not use near highly magnetic devices.
Be Careful of strong impact. Do not dismantle, repair, or modify
the product.
Be careful of foreign substances entering the product interior. E.g.) Paper clips, paper, water, drinks, etc.
When removing foreign substances from the product surface, always use a soft cloth or a towel. Do not use chemical solvents.
User Safety
①
Traffic safety
- Do not listen to music using headphones or earphones when riding a bicycle, motorcycle, or driving a vehicle. It is dangerous and it may be against the law in some regions.
- Reduce the headset or earphone volume when listening to music or FM while you’re walking.
There is a risk of an accident.
②
Hearing Protection
- Do not use headphones or earphones for a long period of time. Professionals suggest that long use of all portable audio devices may have a possibility of causing hearing loss.
①
MPIO Co., Ltd. will not be responsible for data loss or damages occurred while transferring data between the product and a PC.
②
When storing important data, please make a back-up copy. The data may be damaged due to malfunction or other elements such as outer impact or lack of battery.
Please note that in case of data
loss, MPIO Co., Ltd. will not be responsible for the lost data.
③
When inserting/removing the USB plug into a computer, please do so by holding the plug.
④
When the product is connected to a computer, please do not cause impact or shake the connector.
⑤
You should back up the data saved in the product before requesting the after service. MPIO will consider that the customers have backed up their data before sending it to MPIO for after service. MPIO will not back up your data upon receiving the after service request. Additionally, MPIO will bear no responsibility over data loss during the service.
Data Storage
Getting Started
Table of Contents
6 7
Getting Started
■
Safety Precautions ...................................................4
■
Product Features ......................................................8
■
Components .............................................................9
■
Name of the Parts ....................................................10
Connection
■
Connecting to a PC .................................................12
System Requirement ................................................
12
Installing the Software ..............................................
13
Connecting to a PC with a USB Cable .....................
16
■
Installing USB Driver Manually .................................17
■
Using Removable Disk Function ..............................19
Using Removable Disk .............................................
20
Basic Usage
■
Listening to Music ...................................................21
■
Adjusting Volume / Using Hold Switch .....................
22
■
Switching Mode ........................................................23
■
Voice Recording .......................................................
24
■
Using Navigation Mode ...........................................25
■
Setting My List ..........................................................26
■
Deleting File .............................................................27
■
Finding Music / Voice Recording Files .....................
28
Additional Usage
■
Setting Repeat .........................................................32
■
Setting Menu ............................................................33
■
Setting Audio ............................................................
34
Changing the EQ Setting .........................................
34
Setting User EQ .......................................................
35
Setting 3D Sound Effect ...........................................
36
Changing Play Order ................................................
37
■
Setting FM Radio .....................................................38
Saving Channel in Menu ..........................................
38
Setting FM Frequency Bandwidth ............................
39
Setting FM Sound ....................................................
40
Setting Auto Channel Save ......................................
41
Setting Seek Steps ...................................................
42
■
Setting Recording .....................................................43
Setting the Quality of Voice Recording .....................
43
Setting the Quality of FM Recording ........................
44
Customer Support
■
Menu Structure ........................................................62
■
Formatting ................................................................63
■
Storing Default Saving .............................................66
■
Upgrading Firmware .................................................67
Upgrading Firmware in Macintosh ...........................
69
■
Troubleshooting ........................................................
70
■
Product Specifications ..............................................
72
■
Setting Screen Display .............................................45
Select Visualization ..................................................
45
Setting Language .....................................................
46
Setting Track Information Indicator ..........................
47
Setting Playing Time Indicator ..................................
48
Setting Scroll Speed .................................................
49
Setting Lighting Time ................................................
50
Setting Contrast .......................................................
51
Setting the Lever Controls ........................................
52
Setting Lyrics ............................................................
53
■
Setting System .........................................................54
Setting Auto Playback ..............................................
54
Setting Memorized Playback ....................................
55
Setting Fade In .........................................................
56
Confirming Device Information .................................
57
Setting Sleep Timer ..................................................
58
Setting Auto Power Off Time ....................................
59
Initializing to Default .................................................
60
Setting Playback Speed ...........................................
61
■
Listening to FM Radio ..............................................29
Searching Radio Frequency Manually (Scan Mode)
....29
Searching Radio Frequency Automatically (Scan Mode)
...29
Setting Save Channel ..............................................
29
Changing Radio Frequency Saved ..........................
30
Listening to Saved Channels (Channel Mode) .........
30
■
Recording FM Radio ................................................31
Getting Started
Product Features
8 9
Components
Player
Earphones
USB Cable
Installation Driver CD
Quick guide
Arm Band
차 차 차
Neck String
차 차 차
Product Warranty
차  차  차
Case
차 차 차
차 차 차
Supports USB 2.0 high-speed data transmission.
Data can be transferred and used faster and more conveniently using USB 2.0 interface.
Supports USB mass storage
MP3 player can be used as a removable disc. You can save and use the data conveniently at any time
and place.
Supports playback of multiple formats and DRM-applied file
Supports playback of MP3, WMA, OGG, and ASF format music file, as well as the WMA file purchased online that is applied with DRM (Digital Rights Management).
FM radio function
Besides simple listening to the FM radio, channel saving and automatic preset functions are also provided.
Supports voice recording and FM recording
Voice and FM can be recorded.
Supports 7 EQ types and Live 3D Effect
Supported equalizer types include Normal, Pop, Rock, Jazz, Classic, Vocal, and user-defined EQ mode that allows for your preferred equalizer setting. Additionally, Live 3D Effect provides various sound effects such as Pure Studio, Concert, Groove, and Dynamic Bass.
12 hour-long continuous playback time
Low power consumption design technology ensures 12 hour long continuous playback with a single alkaline battery (AAA).
Provides Real Player
License Real Player program is bundled with this product, which enables to author MP3 file and use the music library.
※
Digital audio player with a simple design that everybody can use with ease.
Basic components
Additional components
(Additional components can differ depending on the sales area.)
(AAA) Battery
차 차 차
Note
●
Actual player may vary slightly from images shown, and subject to change without notice.
●
Broken accessories may be purchased separately at MPIO Service Center.
Getting Started
USB adaptor
MY SONG
WESTLIFE - MY LOVE
00:00:30
Name of the Parts
10 11
Battery Indicator
Display of music information
Playback timer
Sleep Indicator
Hold
Current Track /
Total Tracks
EQ Indicator
3D Sound Indicator
Repeat Indicator
Folder Name
Visualization
Note
●
Do not apply excessive force to the cover. It can break down.
Using the Lever
Pressing the Lever: Press the lever down or press and hold it. Pushing Up : Push the lever or push and hold it up. Pushing Down: Push the lever or push and hold it down. Pushing to Left: Push the lever or push and hold it to left. Pushing to Right: Push the lever or push and hold it to right.
Functioning by pushing the lever up, down, left, right direction and pressing it.
LCD Screen
Getting Started
Power / Play / Pause Button
Neck String Hole
USB Connector
Earphone Jack
LCD Screen
Menu, Navigation Setting /
Changing Track / Rewind & Fast
Forward / Volume Control Lever
Function Button
Record Button
Hold Switch
Inserting a Battery
1. Slide the battery cover towards the arrow direction and then, lift up the cover.
2. Insert the battery with correct polarity (+/-) and push down the battery down. Then, close the battery cover towards the arrow direction. (1 AAA battery)
Microphone
Connecting to a PC
12 13
Click
IBM PC
System: USB Interface 2.0, Standard device and a CD-ROM Drive equipped CPU: Pentium 133MHz or faster Memory: 64MB or more Hard disk space: 20MB or more Supported Operating Systems: Windows 98 / 98SE / ME / 2000 / XP
Macintosh
System: USB Interface 2.0, Standard device and a CD-ROM Drive equipped EX) Power Mac G3 (Blue & White) / G4 / G4 Cube, iMac / iBook, PowerBook, PowerBook G4 Memory: 64MB or more Hard disk space: 20MB or more Supported Operating Systems: Mac OS version 9.2 or later
System Requirement
Caution
●
Connection using USB Hubs or extension cables is not guaranteed.
Note
●
In Windows 98 / 98SE, the program must be installed to use FY600 as a removable disk. Please install the USB drivers before use.
●
In Windows ME, 2000, XP, FY600 may be used as a Removable Disk without any separate programs. FY600 is accessible though the Windows Explorer.
●
To format, or upgrade the firmware of FY600 in Windows 98, 98SE, ME, 2000 or XP, please install the MPIO Utility.
Installing the Software
How to install windows 98 device driver, MPIO utility and other utility.
Insert the Installation CD into the CD-ROM Drive. The installation will auto-start and the installation will begin as shown in right. If the installation doesn’t auto-start, double-click the CD-ROM icon in Windows Explorer.
1
Click the [Next] button.
2
Connection
Connecting to a PC
14 15
Click
Click
Click
Click
After selecting [FY600], click the [Next] button.
3
Click the [Next] button. All the utility programs will be installed. The user can select the programs needed to install. But, the following items must be installed.
- Windows 98 Device Driver (For Windows 98/98SE user’s only)
- MPIO Utility
- Windows Media Player Plug-in
4
Click the [Install] button to install the selected utilities in order.
5
Click the [Finish] button to finish the installation. Check the MPIO Utility icon on the desktop to confirm installation.
6
Connection
Connecting to a PC
16 17
Installing USB Driver Manually
Please refer to the below only if the device is not plugged with Windows 98/98E.
Click
Connecting to a PC with a USB Cable
Connect with a USB Cable
Connect FY600 to the PC with the USB cable as shown image.
●
If the USB cable is disconnected from the PC during the initial USB driver installation or in middle of a command,
it may malfunction.
1
The USB Driver will be installed with a message indicting “Looking for a New Device” The installation screen may not appear. Check the Device Manager to confirm the installation.
2
Note
●
If the system operating under Windows 98/98SE doesn’t connect with FY600 automatically, install the
USB Driver manually by referring to “Installing USB Driver Manually”.
●
Windows 98/ME:
[Control Panel] → [Systems] → [Device Manager] →
[Hard Disk Controllers]→ MPIO FY600 USB Device
●
Windows 2000/XP:
[Control Panel] → [Systems] →[Hardware]→[Device Manager]
→[Disk Drives]→ MPIO FY600 USB Device
Confirming USB Installation
Connect FY600 with a computer with the USB cable. When “Add New Hardware Wizard” window appears on the screen as shown in right, click the
[Next] button.
1
Check “Search for the driver for your device”, click the [Next] button.
2
Click
Connection
Installing USB Driver Manually
18 19
Using Removable Disk Function
●
If the USB cable is disconnected while a file is being uploaded or downloaded, the device may malfunction.
●
The music file display order in Windows Explorer when you select a removable disc can be different from the actual playback order.
●
If you rename music files like 001***, 002***… in Windows Explorer, you can play them back by the order of number in the file name.
The USB connection screen when
the power is ON/OFF.
Copy & Paste: Select the data to store, click on right mouse button. Select “Copy” and then “Paste” in the Removable Disk drive.
Click
Click
Insert the CD included in the package into the CD-ROM, check “CD-ROM DRIVE” and click the
[Next] button.
3
When the driver installation is completed, an “Installation complete” window will appear on the screen. Then, click the
[Finish] button.
4
Note
●
In Windows 98 / 98SE, the program must be installed to use FY600 as a removable disk. Please install the
USB drivers before use.
Go to the following destination to confirm that the installation was completed successfully.
●
Windows 98/ME:
[ Control Panel ] → [ Systems ] → [ Device Manager ] →
[ Hard Disk Controllers ]→ MPIO FY600 USB Device
Uploading / Downloading File
Connect FY600 with a USB cable with the power turned OFF.
●
If connected, a connection icon will appear in the LCD screen.
1
Run Windows Explorer on the PC
●
A Removable Disk Drive Icon will be created in Windows Explorer.
2
The user can store, delete data and create a folder in the same way as a hard drive. Copy & Paste, Drag & Drop commands can be used in the same way to store data.
3
Drag & Drop: Select the data store, click and hold down
the left mouse button to drag the files into the Removable Disk drive, and then release the left mouse button.
Caution
Click
Connection
Using Removable Disk
20 21
Listening to Music
●
In Windows 2000, disconnect the USB cable by clicking the
[OK] button after the “Safely Remove Hardware”
message appears.
In Windows XP, disconnect the USB cable after the “Safely Remove Hardware” message appears.
It is recommended that you follow these directions for separating the device from the PC safely. If these instructions are not followed, it may result in data damage or product malfunction.
●
Windows 98/98SE Users
- There is no Safely Remove Hardware command in Windows 98/98SE. The user must wait until the file/data transfer is complete, and then disconnect the USB Cable.
Click
Click
To Play Music(Turning Power ON)
Navigation screen will appear by pressing longer
button after turning the player on with a logo screen. Select file you wish to playback. Press
button to play music.
For more details of ‘how to move folders or files, see ‘Using Navigation Mode’ in page 25.
To Stop (Turning Power OFF)
Pressing
button pauses during playback and it is automatically turned-off if there is no any further operation for 3 minutes.(In case default setting) It is automatically turned off if the
button is pressed longer during playback as well.
ROOT
MY SONG
WESTLIFE-MY LOVE
PAUSE
WESTLIFE
MY LIST RECORD
POWER OFF
Disconnecting the USB Cable
Place mouse cursor on “Stop a Hardware Device” icon in the system tray, and click right mouse button.
1
Select “Stop USB Mass Storage Device”.
Select USB Mass Storage Device from the list of hardware, and click the [Stop] button. When the “Stop a Hardware Device” window appears, select MPIO FY600 USB Device. Then, click the [OK] button and disconnect the USB Cable.
2
3
Note
Note
●
Auto power off time can be changed by setting.(See page 59). You can set in Menu.
Click
Usage
Use the Hold function so that other buttons do not work during playback. To use the Hold function, push the switch in the direction of the arrow.
Adjusting Volume / Using Hold Switch
22 23
Switching Mode
Press and hold the FUNC button during playback or in pause.
1
Pushing FUNC button can change either music playback or FM radio mode.
2
MY SONG
WESTLIFE-MY LOVE
00:00:30
MY SONG
WESTLIFE-MY LOVE
15
MY SONG
WESTLIFE-MY LOVE
00:00:30
Scan
STEREO
MY SONG
WESTLIFE-MY LOVE
00:00:30
Scan
STEREO
The screen changed from playback mode to FM radio mode.
The screen changed from FM radio mode to playback mode.
To Adjust the Volume
Push the lever toward + / − direction during playback or pause to adjust the volume.
Note
●
The volume can be adjusted from 00 to 40.
●
To adjust the volume gradually, push the lever and to adjust
the volume fast, push and hold the lever.
Hold Function
Note
●
If the Hold function is activated, other buttons will not work. And an icon shown in right will
appear on the LCD screen.
●
To deactivated the Hold function, push the switch in opposite the direction of the arrow.
Usage
Voice Recording
24 25
Using Navigation Mode
Voice recording starts if REC button is pressed during pause.
●
Voice Recording does not work while music is playing.
1
Press the
button to pause the recording. Press the
button again to
resume the recording.
2
Press the REC button to stop voice recording after saving the recorded file.
3
●
Push the lever toward
direction to exit the Navigation Mode.
Pressing the
button or lever down without selecting pop-up menu or push the lever toward
direction can playback the file you selected.
●
Press the FUNC button and move the lever toward + / − direction to select Play Now and playback file by moving the lever toward
direction or pressing it down. Press
button to playback as well.
3
RECORD VOICE001. MP3
00:05:40
00:58:00
RECORD VOICE001. MP3
00:05:45
00:54:00
RECORD
VOICE001. MP3
MY SONG
WESTLIFE-MY LOVE
00:00:30
WESTLIFE-MY LO
MUSIC002.mp3 MUSIC003.mp3
MY SONG
Play Now
Add to List Delete
Note
●
The files will be stored in order of VOICE001, VOICE002, etc. And it will be stored in the RECORD folder
as a MP3 file.
●
When storing the voice recording files, recording wills stop automatically if there aren’t sufficient memory
space.
●
Pressing the REC button in FM Mode will record the radio. Be sure to use voice recording in MP3 Mode.
●
The voice recording memory is limited to 64MB for each. In case the volume of any voice recording is more
than 64MB, the file being recorded is automatically saved and it continues recording by creating a new file. To operate this, it needs around 2 seconds and during that period(2seconds), voice recording stops.
Uses navigation function for more convenient to search folders or files you wish.
Press the lever during playback or in pause to enter Navigation Mode.
●
A file list will appear on the LCD screen.
1
Select the file or folder to play.
●
Entering a folder: After selecting the folder, press or push the lever in
direction.
●
Leaving a folder: Push the lever in
direction.
2
Note
Usage
Push the lever in + / − directions to select Add to List, and press the lever to add the selected items to My List.
●
The icon of the selected file will be changed to ( → ).
●
Check the file set in MY LIST folder in navigation mode.
Setting My List
26 27
Press the FUNC button after moving to the file you want in navigation mode.
●
A pop up menu will appear.
1
2
Press FUNC button after moving to the file you want to delete in navigation mode.
●
A pop up menu will appear.
1
Push the lever toward + / −
direction to select Delete and then, push the lever toward
direction or
press the lever down toward vertical direction.
2
●
Release navigation mode to cancel delete.
●
If there is a music file in MY LIST, it is deleted as well in case the music file is deleted in navigation mode.
●
If a music file in MY LIST is deleted, the music file is not deleted in navigation mode.
The file selected is deleted.
4
WESTLIFE-MY LO
MUSIC002.mp3 MUSIC003.mp3
MY SONG
Play Now
Add to List
Delete
WESTLIFE-MY LO
MUSIC002.mp3 MUSIC003.mp3
MY SONG
Play Now Add to List
Delete
WESTLIFE-MY LO
MUSIC002.mp3 MUSIC003.mp3
MY SONG
Play Now Add to List
Delete
Deleting
WESTLIFE-MY LO
MY LIST
WESTLIFE-MY LO
MY LIST
Play Now
Off the List
Delete
The display released in MY LIST.
WESTLIFE-MY LO
MUSIC002.mp3 MUSIC003.mp3
MY SONG
Play Now
Off the List
Delete
The display released in
navigation mode.
WESTLIFE-MY LO
MY LIST
Play Now Off the List
Delete
The delete screen in MY LIST mode
The delete screen in navigation mode
Deleting File
WESTLIFE-MY LO
MUSIC002.mp3 MUSIC003.mp3
MY SONG
Play Now Add to List
Delete
DELETE THE FILE
ARE YOU SURE?
NO
YES
Push the lever toward
+ / −
direction to select YES in DELETE THE FILE ARE YOU SURE? window and
then, push the lever toward
direction or press down toward vertical direction to execute deleting.
●
Select NO to cancel delete.
3
Setting My List
To deselect the files from My List, use the Navigation Mode to select the file to remove. Then, press the FUNC button and select Off the List.
4
Enter My List in Navigation Mode and play the selected files.
3
Note
Usage
Finding Music / Voice Recording Files
28 29
Listening to FM Radio
Press and hold the FUNC button to switch to FM Mode. (Refer to “Switching Mode” on page 23)
Searching Radio Frequency Manually (Scan Mode)
●
Push the lever toward
direction to move to the
frequency being received.
Setting Save Channel
When the lever is pressed while listening to FM Radio, Save Channel screen will appear.
●
Frequency seek steps can be changed in [FM Radio]/[Seek Step] Menu settings.
1
2
Push the lever in + / − direction to select channel number. Push the lever in
direction
or press it to save the frequency.
●
FM radio mode is not entered with low battery.
●
Up to 20 channels are savable.
●
The channels saved are verified in [FM Radio] → [Save Channel] in menu.
●
Save Channel is also available in FM radio menu.(see page 38)
●
FM channel can not be deleted but the new frequency can be saved in the channel that had been saved previous frequency.
A function for saving the selected frequency
Searching Radio Frequency Automatically (Scan Mode)
●
Push and hold the lever toward
direction automatically to search for the frequency being received.
Scan
STEREO
Scan
STEREO
CH01 : 105.50
CH02 : CH03 :
Fast Forward / Rewinding During Playback
●
Push the lever in
directions during playback to Fast forward / rewind the music.
Release the lever to resume playback.
Finding Files During Playback
●
Push the lever in
direction during playback to play the next track.
●
After starting playing back, push the lever in
direction to go back to the last track in the first 10 seconds
and push the lever in
direction after 10 seconds to restart the current track from the beginning.
Finding Files When Playback is Stopped
●
Push the lever in
directions to move to next / previous track when playback is stopped.
Note
●
The MP2 or MP1 format files with extensions changed to MP3 may not played by FY600.
●
When playing VBR files, pushing the lever in
direction within the first 10 seconds may
not play the previous track.
Note
Note
Usage
Listening to FM Radio
30 31
Recording FM Radio
Records the selected FM Radio broadcast
Press the REC button to start FM radio recording while listening to FM radio.
1
Changing Radio Frequency Saved
Press the lever towards the vertical direction shortly, and select the saved channel number when the Save Channel window appears. Then, push the lever towards the
direction.
1
Push the lever toward + / − direction in OVERWRITE? window to select ‘YES’ and then, push the lever toward
direction or press down toward
vertical direction to execute overwrite function.
2
Scan
STEREO
CH01 : 105.50
CH02 : CH03 :
OVERWRITE?
NO
YES
Channel 02/15
CH02
STEREO
Scan 02/15
NO CHANNEL!!
RECORD FM001. MP3
00:05:40
00:58:00
RECORD FM001. MP3
00:05:45
00:54:00
RECORD
FM001. MP3
Listening to Saved Channels (Channel Mode)
Press the FUNC button to select CHANNEL MODE.
1
2
Push the lever in
directions to move between the saved
frequencies (channels).
Press the FUNC button to change the reception mode (SCAN↔ CHANNEL).
3
The saved channel is selected.
Note
●
If there aren’t any saved frequencies (channels),
NO CHANNEL!!
message will appear on the screen and the device will remain in SCAN mode.
●
For more detailed information about the FM Menu, refer to pages
38~42.
Press the
button to pause the recording. Press the
button again to
resume the recording.
2
Press the REC button to stop voice recording after saving the recorded file.
3
Note
●
The files will be stored in order of FM001, FM002, etc. And it will be stored in the RECORD folder as a MP3
file.
●
When storing the voice recording files, recording wills stop automatically if there aren’t sufficient memory space.
●
The voice recording memory is limited to 64MB for each. In case the volume of any voice recording is more than
64MB, the file being recorded is automatically saved and it continues recording by creating a new file. To operate this, it needs around 2 seconds and during that period(2seconds), voice recording stops.
Usage
Setting Repeat
32 33
Setting Menu
Press the REC button in the start position of the music/voice file to repeat during playback.
appears on LCD window and
icon is blinking.
●
Press the REC button again to release repeat.
●
Pause is usable during Sector Repeat.
WESTLIFE-MY LOVE
00:00:30
WESTLIFE-MY LOVE
00:01:30
Main Menu
Audio
FM Radio Recording
EQ
User EQ Live 3D Effect
EQ
Normal
Pop Rock
Audio
Repeat Section Start Position
Repeat Section End Position
Press the REC button again at the desired end position.
mark will appear in the LCD screen.
The selected section will be repeated.
Note
How to Use the Menu
Press and hold the lever to enter the menu. Selecting Menu: Push the lever in + / − directions to move the highlight. Entering Menu: Push the lever in
direction or press the lever to enter the menu.
Changing Settings: Push the lever in + / − directions to change the setting. Saving Changed Settings: Push the lever in
direction or press the lever to save the setting.
Going Back in Menu Tree
: Push the lever in
direction.
Canceling Menu Changes: Push the lever toward
direction to release from Menu without saving the
value selected.
Audio: How to set the effect of music file. FM Radio: Setting the options of FM Radio Mode Recording: Setting the options for voice recording mode Display: Setting the options for the screen System: Adjusting system settings
Usage
EQ
User EQ Live 3D Effect
Setting Audio
34 35
Select Audio in the menu.
1
Using FUNC Button
Press the FUNC button during playback.
1
You can define your own EQ effect by adjusting the setting values in each frequency range, instead of the pre-defined EQ setting values.
Select Audio in the menu.
1
Push the lever in + / − directions to select User EQ and then, push the lever in
direction or
press it to enter.
●
User EQ setting will appear in the LCD screen.
2
Push the lever in
directions to change the frequency band and then, push the lever in + / −
directions to adjust the frequency band settings.
3
It moves to the previous menu after saving the setting value if the lever is pushed toward
direction or press the lever down toward vertical direction to move to OK after completing setting the bandwidth of each frequency.
4
Push the lever toward + / − direction to select the EQ and then, press the lever down toward vertical direction or press the FUNC button to save the setting value.
2
●
EQ Icon order The EQ icons will be changed in the following order: Normal (NOR) → Pop (POP) → Rock (ROC) → Jazz (JAZ) → Classic (CLA) → Vocal (VOC)
● It playbacks with the EQ saved in the EQ(USR), if you set the EQ with the EQ(USR).
EQ
Normal
Pop Rock
Audio
User EQ
EXIT
OK
MY SONG
WESTLIFE-MY LOVE
00:00:30
EQ
User EQ
Live 3D Effect
Audio
Changing the EQ Setting
Push the lever in + / − directions to select EQ and then, push the lever in
direction or press it to enter.
2
Push the lever in + / − directions to elect the EQ item and then, push the lever in
direction or press it to
save the setting. After saving, device will automatically return to the previous menu.
3
Note
Setting User EQ
Note
●
Canceling User EQ Settings
Push the lever in
direction and move to the EXIT to cancel User EQ setting.
Usage
Setting Audio
36 37
Select Audio in the menu.
1
Push the lever in + / − directions to select Live 3D Effect and then, push the lever in
direction or
press it to enter.
2
Push the lever in + / − directions to select the 3D effect and then, push the lever in
direction or press it to
save. After saving, the device will return to its previous menu.
3
3D sound effect will enhance your music experience.
Changing Play Order
Select Audio in the menu.
1
Push the lever in + / − directions to select Repeat and then, push the lever in
direction or press it to enter.
2
3
Push the lever toward + / − direction to select the order of playback wanted and then, push the lever toward
direction or press it to save. After saving, the device will return to its previous menu.
●
The icon of playback changing order:
Normal (
) → Repeat One ( ) → Repeat All ( ) → Random ( ) →
Directory Normal (
) → Directory Repeat ( ) → Directory Random ( )
Normal : Plays the music file(s) once including folder Repeat One : Repeats only one music file Repeat All : Repeats all the music file(s) Random : Plays randomly all the music file(s) Directory Normal : : Plays the music file(s) once in the folder selected. Directory Repeat : Repeats all the music file(s) in folder. Directory Random : Plays randomly all the music file(s) in folder.
Live 3D Effect
Off
Pure Studio Concert Sound
Repeat
Audio
Repeat
Normal
Repeat One Repeat All
Using FUNC Button
Press the FUNC button during playback.
1
Push the lever toward
direction to select 3D sound effect icon and then,
push the lever toward + / − direction.
2
MY SONG
WESTLIFE-MY LOVE
00:00:30
Press the lever down toward vertical direction or press the FUNC button to save the setting value.
3
Using FUNC Button
Press the FUNC button during playback.
1
Push the lever toward
direction to select the icon of playback order and
then, push the lever toward + / − direction to select.
2
MY SONG
WESTLIFE-MY LOVE
00:00:30
Press the lever down toward vertical direction or press the FUNC button to save the setting value.
3
EQ User EQ
Live 3D Effect
Audio
Select ‘How to playback’ of the music files saved.
Setting 3D Sound Effect
Note
Usage
●
The changing order of 3D sound effect
Off → Pure Studio → Concert Sound → Groove → Dynamic Bass
●
3D sound can not be applied during playback of OGG file.
Note
Setting FM Radio
38 39
Saving Channel in Menu
Select FM Radio in menu.
●
Set the frequency you want to save.
1
Push the lever toward + / − direction to select save channel and then, push the lever toward
direction
or press down toward vertical direction to enter.
2
3
Push the lever toward + / − direction to select the number of channel and then, push the lever toward
direction or press down toward vertical direction to save the setting value.
Setting FM Frequency Bandwidth
Select the FM frequency band to receive.
Select FM Radio in menu.
1
Push the lever in + / − directions to select FM Band and then, push the lever in
direction or
press it to enter.
2
3
Push the lever in + / − directions to select the FM Band and then, push the lever in
direction or
pushing it to save. After saving the FM Band setting, the device will return to its previous menu.
Korea/USA/China/Europe 87.5MHz ~108MHZ
Worldwide 76MHz ~108MHZ
Japan 76MHz ~92MHZ
FM Frequencies for each region
Set by pressing and hold the FUNC button after change to FM radio mode. Saving channel in menu can not be set in music mode.
●
FM radio mode can not be entered with low battery.
●
Up to 20 channels are savable.
Save Channel
FM Band FM Sound
FM Radio
Save Channel
CH01 : 99.90
CH02 : CH03 :
FM Band
US/EU/KR/CN
Worldwide Japan
Save Channel
FM Band
FM Sound
FM Radio
Note
Usage
Setting FM Radio
40 41
Setting FM Sound
Select the sound modes for FM Radio.
Select FM Radio in menu.
1
Push the lever in + / − directions to select FM Sound and then, push the lever in
direction or
press it to enter.
2
3
Push the lever in + / − directions to select the FM sound and then, push the lever in
direction or
press it to save. After saving, the device will return to its previous menu.
Setting Auto Channel Save
Set by pressing and hold the FUNC button after change to FM radio mode. Auto scan menu can not be set under the other mode.
Select FM Radio in menu.
1
Push the lever in + / − directions to select Auto Preset and then, push the lever in
direction or
press it to enter.
2
3
Push the lever toward + / − direction to select Yes and then, push the lever toward
direction or press down toward vertical direction to delete the channel saved and automatically save the receivable frequency sequentially.
●
Select NO to cancel auto channel save.
FM Sound
Stereo
Mono
Save Channel FM Band
FM Sound
FM Radio
Auto Preset
No
Yes
Auto Preset
Seek Step
FM Radio
●
Up to 20 channels are savable.
●
The channels saved can be verified in Save Channel mode.
●
Radio plays with the channel saved as the first(CH01) after complete auto channel saving.
Note
Usage
Setting FM Radio
42 43
Setting Recording
Setting Seek Steps
Select the seek steps for scanning frequencies.
Select FM Radio in menu.
1
Push the lever in + / − directions to select Seek Step and then, push the lever in
direction or
press it to enter.
2
3
Push the lever in + / − directions to select the seek step and then, push the lever in
direction or
press it to save. After saving, the device will return to its previous menu.
Setting the Quality of Voice Recording
Set the quality of voice recording.
Select Recording in menu.
1
Push the lever in + / − directions to select Voice-Quality and then, push the lever in
direction
or press it to enter.
2
3
Push the lever toward + / − direction to select the voice quality and then, push the lever toward
direction or press it to save. After saving, the device will return to its previous menu.
Seek Step
50kHz
100kHz
Auto Preset
Seek Step
FM Radio
Voice-Quality
FM-Quality
Voice-Quality
Low
Middle High
Recording
Usage
Setting Recording
44 45
Setting the Quality of FM Recording
Set the quality of FM recording.
Select Recording in menu.
1
Push the lever in + / − directions to select FM-Quality and then, push the lever in
direction or
press it to enter.
2
3
Push the lever toward + / − direction to select the FM quality and then, push the lever toward
direction or press it to save. After saving, the device will return to its previous menu.
Setting Screen Display
Select Visualization
Select Display in menu.
1
Push the lever in + / − directions to select Visualization and then, push the lever in
direction or
press it to enter.
2
3
Push the lever in + / − directions to select the visualization to use and then, push the lever in
direction or press it to save. After saving, the device will return to its previous menu.
●
The selected visualization will appear at the bottom of the LCD Screen.
Select the visualization shown at the bottom of the LCD screen.
Visualization Setting Icons
Status Stereo Image File info Level meter
Visualization
Language File Info
Visualization
Status
Stereo Image File info
Display
Voice-Quality
FM-Quality
FM-Quality
Low
Middle High
Recording
Usage
Setting Screen Display
46 47
Setting Language
Select Display in menu.
1
Push the lever in + / − directions to select Language and then, push the lever in
direction or
press it to enter.
2
3
Push the lever in + / − directions to select the desired menu language and then, push the lever in
direction or press it to save. After saving, the device will return to its previous menu.
●
The selected language will appear in the menu.
Assigning the language of ID3 tag of the music can display the accurate information of the file. 55 differences of languages support ID3 tag in total. English, Korean, Traditional Chinese, Simplified Chinese, Japanese, Spanish and Russian support ID3 tag with menu among 55 languages.
Setting Track Information Indicator
Select Display in menu.
1
Push the lever in + / − directions to select File Info and then, push the lever in
direction or
press it to enter.
2
3
Push the lever toward + / − direction to select track information and then, push the lever toward
direction or press it to save. After saving, the device will return to its previous menu.
Set the Music file information shown in the LCD screen.
Tag Info : It shows tag information only in case the file has tag information. If there is no tag information, it just shows name of the file. File info : It displays the name of the file.
Language
KOREAN
KYRGYZ LATVIAN
Visualization Language
File Info
File Info
Tag Info
File info
Display
Visualization
Language
File Info
Display
●
55 languages shown in Language settings are supported as ID3 tags.
Refer to page 46 for language setting.
Note
Usage
Setting Screen Display
48 49
Setting Playing Time Indicator
Select Display in menu.
1
Push the lever in + / − directions to select Playing Time and then, push the lever in
direction or
press it to enter.
2
3
Push the lever toward + / − direction to select the playback time and then, push the lever toward
direction or press it to save. After saving, the device will return to its previous menu.
Select the Playing Time indicator shown in the LCD screen.
Running time: Shows the playing time of the current song. Remaining time: Shows the remaining time of the current song.
Setting Scroll Speed
Select Display in menu.
1
Push the lever in + / − directions to select Scroll Speed and then, push the lever in
direction or
press it to enter.
2
3
Push the lever in + / − directions to select the desired scroll speed. Push the lever in
direction toward OK to save the setting. Pressing the lever shortly will also save the setting. After saving, the device will return to its previous menu.
Adjust the scroll speed of the text shown in the LCD screen.
Playing Time
Scroll Speed Backlight Time
Playing Time
Running time
Remaining time
Display
Playing Time
Scroll Speed
Backlight Time
Display
Scroll Speed
EXIT
OK
6px
Note
●
The range of the text scroll speed is from 2~16 pixels and it is divided into 5 different levels.
Select the desired scroll speed.
Usage
Setting Screen Display
50 51
Setting Lighting Time
Select Display in menu.
1
Push the lever in + / − directions to select Backlight Time and then, push the lever in
direction or
press it to enter.
2
3
Push the lever in + / − directions to select the desired lighting time. Save the setting by pushing the lever in
direction toward OK. Pressing the lever shortly will also save the setting. After saving, the device will
return to its previous menu.
Set the light time for the LCD screen.
Setting Contrast
Select Display in menu.
1
Push the lever in + / − directions to select Contrast and then, push the lever in
direction or
press it to enter.
2
3
Push the lever towards + / − direction to select the contrast you wish. Then, push the lever towards
direction and move to OK to save the setting value. Press the lever towards vertical direction to save the setting value. Then, the previous menu will appear when the setting value is saved.
You can adjust the contrast of the LCD window.
Playing Time Scroll Speed
Backlight Time
Display
Backlight Time
EXIT
OK
10sec
Contrast
Controls Lyrics
Display
Contrast
EXIT
OK
Level 1
Note
●
The lighting time can be adjusted from 5~20 seconds.
●
If the backlight is set to “ON”, the LCD is continuously on and the backlight can not be turned on
with low battery.
Note
●
You can adjust the contrast within the range of 1 to 5.
●
The bigger the level value, the darker the screen.
Usage
Setting Screen Display
52 53
Setting the Lever Controls
Select Display in menu.
1
Push the lever in + / − directions to select Controls and then, push the lever in
direction or
press it to enter.
2
3
Push the lever toward + / − direction to select the method of lever controls and push the lever toward
direction or press it to save. After saving, the device will return to its previous menu.
Right Hander : It shows to be operated with right hand.(default setting)
Setting Lyrics
Select Display in menu.
1
Push the lever in + / − directions to select Lyrics and then, push the lever in
direction or press
it to enter.
2
3
Push the lever in + / − directions to turn Lyrics on of off and then, push the lever in
direction or
press it to save. After saving, the device will return to its previous menu.
On: Shows the available lyrics information of the current file. Off: Hides the lyrics of the current song.
The direction of information on LCD is changeable for right/left handed people to operate better.
Contrast
Controls
Lyrics
Display
Controls
Right Hander
Left Hander
Left Hander : It shows to be operated with left hand, rounding LCD screen to 180 degree.
Contrast Controls
Lyrics
Display
Lyrics
On
Off
Select to display the lyrics’ information onto LCD during playback of MP3, WMA with lyrics’ information. If adding lyrics’ information needed, please refer to the appendix, regarding ‘adding lyrics’’(lyrics’ sync)
Caution
●
Any file format that MPIO does not support might not be able to display the lyrics even if they have lyrics’
information.
●
The lyrics’ display function can not be supported depends on area.
Usage
Setting System
54 55
Setting Auto Playback
Select System in menu.
1
Push the lever in + / − directions to select Auto Play and then, push the lever in
direction or
press it to enter.
2
3
Push the lever toward + / − direction to select setting auto playback and then, push the lever toward
direction or press it to save. After saving, the device will return to its previous menu.
Off : Navigation screen appears when the power is ON and press the
button to playback.
On : The device will automatically play music once the power is turned On.
The device may be set to play music automatically once the power is turned ON.
Setting Memorized Playback
Select System in menu.
1
Push the lever in + / − directions to select Resume and then, push the lever in
direction
or press it to enter.
2
3
Push the lever toward + / − direction to select Memorized playback and then, push the lever toward
direction or press it to save. After saving, the device will return to its previous menu.
Off: When turned On, the device will play music from the last position. On: When turned On, the device will turn the play music from the beginning.
When turned On, the Resume function allows the player to begin playing music from the last position.
Auto Play
Resume Fade In
System
Auto Play
Off
On
Auto Play
Resume
Fade In
System
Resume
Off
On
Usage
Setting System
56 57
Setting Fade In
Select System in menu.
1
Push the lever in + / − directions to select Fade In and then, push the lever in
direction or
press it to enter.
2
3
Push the lever toward + / − direction to select Fade in and then, push the lever toward
direction or
press it to save. After saving, the device will return to its previous menu.
Off: When the music begins, it will be played in the original volume. On: The volume of the intro is to be gradually increased when the music starts.
Fade in setting increase the music volume steadily so that the user is not surprised by the loud music.
Auto Play Resume
Fade In
System
Fade In
Off
On
Confirming Device Information
Select System in menu.
1
Push the lever in + / − directions to select Information and then, push the lever in
direction or
press it to enter.
2
Check the version of firmware saved on the device, using memory size and the information of the whole memory size.
3
The System Information will be shown on the screen
Information
Sleep Auto Power Off
System
Information
Usage
Setting System
58 59
Setting Sleep Timer
Select System in menu.
1
Push the lever in + / − directions to select Sleep and then, push the lever in
direction or
press it to enter.
2
When listening to music or FM radio, you can set up the device so that the power is automatically turned OFF after a certain period of time.
3
Push the lever in + / − directions to set the timer and then, push the lever in
direction toward OK to save the setting. Pressing the lever shortly will also save the setting. After saving, the device will return to its previous menu.
Sleep
EXIT
OK
10min
Setting Auto Power Off Time
Select System in menu.
1
Push the lever in + / − directions to select Auto Power Off and then, push the lever in
direc-
tion or press it to enter.
2
Auto Power Off function turns the power OFF when a certain period of time passes after the music is paused or stopped.
3
Push the lever in + / − directions to set the Auto Power Off timer. Push the lever in
direction toward OK to save the setting. Pressing the lever shortly will also save the setting. After saving, the device will return to its previous menu.
Auto Power Off
EXIT
OK
3min
Information
Sleep
Auto Power Off
System
Information Sleep
Auto Power Off
System
Note
●
Canceling Sleep Timer
Push the lever in
direction and move to the EXIT to cancel the sleep timer.
●
Setting the ‘reserved power off’ is settable from 10~120 minutes and select OFF when it is not needed.
●
The setting value automatically returns to OFF if the power is resumed after setting the ‘reserved power off”.
Note
●
Canceling Auto Power Off Settings
Push the lever in
direction and move to the EXIT to cancel the Auto Power Off settings.
●
Setting the ‘auto power off time’ is settable from 3~15 minutes and turn it off when it is not needed.
Usage
Setting System
60 61
Initializing to Default
Select System in menu.
1
Push the lever in + / − directions to select Initial Setting and then, push the lever in
direction or
press it to enter.
2
Resets all the user’s menu settings and initializes all menu settings to default settings.
3
Push the lever toward + / − direction to select Yes and then, push the lever toward
direction or
press it to save. After saving, the device will return to its previous menu.
Initial Setting
Speed Control
System
Initial Setting
No
Yes
Setting Playback Speed
Select System in menu.
1
Push the lever in + / − directions to select Speed Control and then, push the lever in
direction
or press it to enter.
2
3
Push the lever in + / − directions to select the playback speed and then, press the lever in
direction toward OK to save. Pressing the lever shortly will also save the setting. After saving, the device will return to its previous menu.
Speed Control
EXIT
OK
100%
Playback speed can be adjustable and it is very useful on studying foreign language.
Playback speed control is applied to only MP3 file format.
Initial Setting
Speed Control
System
Note
●
Canceling playback speed settings
Push the lever in
direction and move to the EXIT to cancel the playback speed settings.
●
Setting playback speed is settable up to 75~150%.
●
The higher percentage represents increased speed. The default setting of 100% is recommended for listening to music.
●
The playback speed automatically returns to normal if the power is resumed after setting the ‘playback speed control’.
Usage
Menu Structure
62 63
Formatting
Main Menu
Audio
EQ
User EQ
Live 3D Effect
Repeat
FM Radio
Save Channel
FM Band
FM Sound
Auto Preset
Seek Step
Recording
Voice-Quality
FM-Quality
Display
Visualization
Language
File Info
Playing Time
Scroll Speed
Backlight Time
Contrast
Controls
Lyrics
System
Auto Play
Resume
Fade In
Information
Sleep
Auto Power Off
Initial Setting
Speed Control
You can format FY600 from a Windows PC using MPIO Utility.
Click
Turn the power of FY600 ON and connect it to a computer using a USB cable.
1
Double-click MPIO Utility icon in your desktop.
2
Click the [Format & Config] button.
3
Click the [ OK ] button.
4
Click the [ Start ] button.
5
Click the [ OK ] button.
6
Click
Click
Click
Customer Support
Formatting
64 65
Follow the instructions when formatting FY600 using a Windows PC without MPIO Utility. Using MPIO Utility is recommended for formatting the device.
Click
When formatting is complete, click the [ OK ] button.
7
Click the [ Close ] button.
8
Click the [ OK ] button after the “Safely Remove Hardware” message appears as shown.
9
After clicking the [ OK ] button, Format & Config (Default Setting Restoration) is complete. You may separate the device from the PC.
10
●
The captured screens of MPIO Utility may vary for the user’s PC environment.
●
MPIO Utility cannot be run under MAC OS.
●
For information regarding MPIO Utility installation, refer to [Installing the software] on page 13.
Note
Select the Removable Disc icon. Click your right mouse button and select FORMAT. Click the [Start] button.
1
Note
●
When formatting the device using the Windows FORMAT Command, it must be formatted in FAT or FAT16. To use the device after it has been formatted, the default settings must be restored using MPIO Utility. Refer to page 66 [Storing Default Settings] for more information.
●
The captured screens of MPIO Utility may vary for the user’s PC environment.
Caution
●
The files in FY600 WILL BE LOST after formatting.
Click
Click
Click
Click
Customer Support
Storing Default Settings
66 67
Upgrading Firmware
When FY600 has been formatted using the Windows FORMAT Command (FAT or FAT16), the default settings must be restored using MPIO Utility’s Setup Config function. Refer to page 13 [Installing the software] for more information about installing MPIO Utility.
The files in FY600 will be lost after upgrading firmware.
Refer to page 13 [Installing the software] for information on how to install MPIO Utility.
Click
Turn the power of FY600 ON and connect it to a computer using a USB cable.
1
Double-click MPIO Utility icon in your desktop.
2
Click the [Setup Config] button.
3
Click the [ OK ] button
4
Click the [ OK ] button after the Safely Remove Hardware message appears as shown.
5
After clicking the [OK] button, Setup Config (Default Setting Restoration) is complete. You can unplug the device from the PC.
6
Download the firmware from the MPIO web site, and uncompress and save it in the PC. (www.mpio.com)
1
Turn the power of FY600 ON and connect it to a computer using a USB cable.
2
Double-click MPIO Utility icon in your desktop.
3
Click the [F/W Upgrade] button.
4
Click the [ OK ] button.
5
Select the downloaded Upgrade.FY600.dwu file in the [ Browse ] window and then, click the [ Open ] button.
6
Note
●
The firmware upgrade files provided at MPIO web
site are compressed as ZIP files. When you unzip the file, a TXT file with information about the changes and an Upgrade_FY600.ROM file will be created.
Click
Click
Click
Click
Customer Support
Click
Click
Upgrading Firmware
68 69
Firmware is automatically upgraded when the device is unplugged from your PC.
When the firmware upgrade is complete, FY600 will be turned OFF automatically.
9
●
Please be aware if you apply external shock or the battery is low while the player is upgrading the firmware, it can cause product breakdown or malfunction.
Click the [ OK ] button after the Hardware Safely Removed message appears as shown.
7
After clicking the [ OK ] button, the first part of firmware upgrade
is complete.
8
Caution
Download the firmware for Macintosh from the MPIO web site, and uncompress and save it in the PC. (www.mpio.com)
1
Turn the power of FY600 ON and connect it to a computer using a USB cable.
2
Save the firmware upgrade file (Image.dat, Player.rom, and Upgrade.axf) in FY600.
3
Separate FY600 from the computer.
4
Upgrading Firmware in Macintosh
Firmware is automatically upgraded when the device is unplugged from your PC.
When the firmware upgrade is complete, FY600 will be turned OFF automatically.
5
Note
●
To upgrade the firmware, there must be 10MB of free memory space in FY600’s memory.
●
Formatting FY600’s memory using Macintosh PC is not recommended. To format FY600, please contact the
customer support center.
●
The firmware upgrade files for Macintosh are compressed as Stuffit files. When you unzip the file, a TXT file with
information about the changes and an (Image.dat, Player.rom, and Upgrade.axf) file will be created.
●
Causing outer impact on FY600 or lack of battery during firmware upgrade may cause a malfunction.
Click
Click
Customer Support
The files in FY600 will be lost after upgrading firmware.
Troubleshooting
70 71
I cannot turn on the player.
■
If the battery is completely discharged (flat), the player cannot be turned on.
Replace with battery with new one and turn the player on.
I cannot hear any sound or, I can hear noise.
■
Check the sound volume.
■
Your player may be influenced by the neighboring electrical device.
■
If the music file is damaged, noise or sound interruption can occur.
Letters on the LCD look broken.
■
Reset the language to English in the [Setting language] (See page 46). Then, set the file name using the [Setting display of track information] menu (See page 47).If the problem still cannot be resolved, contact our customer service center. However, some special fonts/languages may still look broken.
I can see that some memory is used but no saved file is found.
■
Execute the [Format & Config] command using MPIO utility. (See page 63.) If you run the above command, all files in the product will be removed. You can check the data file only when the player is connected to the PC.
Letters on the LCD look broken. I can hear noise and cannot set the broadcasting channel when I listen to the radio.
■
Your player may be influenced by the neighboring electrical device. Secure enough distance.
■
The earphone plays a role of an antenna when listening to the radio. Therefore, reception sensitivity can be deteriorated if you don’t use an earphone. Of, FM reception may be poor in some area. Please understand that.
I cannot download the file from the PC
■
Connection to the PC using the extension cable or USB hub cannot be guaranteed.
■
Make sure to use the USB cable provided with the product as an accessory when connecting the player to the PC.
FY600 suddenly stops and something seems wrong.
■
Check the battery. Lack of battery may cause FY600 to stop.
Upgrading the firmware is too hard.
■
Try using the bundled MPIO utility. Mac users can just copy the provided file into FY600.
Customer Support
Product Specifications
72 73
Memo
27(W) × 68.4(H) × 22.6(D)/mm 23g (excluding a battery) 128×64 Full Graphic LCD 128MB / 256MB / 512MB / 1GB / 2GB MP3, WMA(WMA, DRM), OGG, ASF MP3 20Hz ~ 20kHz 93dB 18mW/Channl (Europe : 6mW/Channel) 76 ~ 108MHz 56dB MP3 English, Korean, Japanese, Chinese(simplified), Chinese(traditional), Spanish, Russian 55 Languages supported USB 2.0 (High Speed) Windows 98 / SE / ME / 2000 / XP Macintosh : Mac OS Version 9.2 or later. Supported AAA×1 Approx. 12 hours (When playing back 128kbps MP3 file with volume level 20) 0℃ ~ 40
℃
Dimensions
Weight
Display(LCD)
Memory
Decoding
Voice Recording Frequency Range S/N ratio Output Power Frequency Band S/N ratio FM Recording Menu Languages Supported Languages (ID 3 Tag Languages ) PC Interface
Supported OS
Removable Disk Type Battery life
Operating Temperature
Audio
Battery
PC Interface
Languages
FM Radio
Note
●
The actual memory available to use may differ from the product’s memory capacity due to the logical file system.
●
The data transmission speed may differ depending on the user’s PC specifications.
●
PC connection using USB Hubs or extension cables is not guaranteed.
●
The contents of this manual can be changed without a prior notice for continuous performance improvement and
additional function supplementation in the future.
Customer Support
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use