MP3 Car Soundvision M1 Quick Start Guide

User Manual

Appearance Introduction

Front

Camera

Volume Button

Power Button

Back Camera

Receiver

Status Icons

Network Signal
2G:2G service connected
3G:3G service connected
4G:4G service connected

Call Forward

Missed call

SMS/MMS

Alarm is set

Vibrate mode

Bluetooth is on

Connected to PC

Connected
the earphone

Sign-in/sync error

Song is playing

WLAN service
connected

Call in progress

Wireless service are
off(Airplane mode)

Ringer is off

Battery usage

Battery is low

Battery is charging

1.Getting started

1.1 Keypad operations

1.Power botton:
Press and hold to power on and off.
With any interface,press to turn off the screen light and lock
the phone, re-press only turn on the screen light.

2.Volume Button :To increase and decrease the ring volume
or WMM(melei-media) volume.

3.Touch keys below the screen
Menu Key:Tap to view the menu screen of the interface.
Home Key:Tap to return to the home screen from any
application or interface.
Return Key:Tap to return to the previous interface or from
the progressing application.

Note:The phone may support two SIM cards,but can only
use one when calling.

Please use the battery and accessories provided with the
phone.Factors that may affect the battery effeciency is
diverse,such as the system seting of the operator,network
signal,environment temprature,the phone operations and
settings,external equipments that connecting to the phone,
your voice and data content and the mode when operating
applications.

Warning:To avoid fire and burning risks caused by improper
use of the battery.

Do not ever try to open, disassemble or repair the battery.
Do not extrude the battery to avoid short trouble with outer
device or place the battery near to any open flame or in
the water.
Avoid placing the battery in a high temperature over

60℃（140℉）.

Use the specified battery when it need to change.
Collect and deposite the spent battery according to the
local regulations.

Installing the SIM card and storage card

SIM card:

Before installing the SIM card,please turn off the you device.
The SIM card may have your telephone number, service
message,contacts information and texting records.
This phone can support 4G(TD-LTE)3G(TD-SCDMA)and 2G
SIM card for more detailed information,you can consult with
your service provider.

1.Use the key to open the SIM card slot.

2.Locate the SIM card slot,and then insert the SIM card
with its gold contacts facing down and its cut-off corner
facing away from the card slot.

3.Slide the SIM card completely into the slot.

Storage Card:

You can install a memory card into you devicce,it will make
you phone have additional storage for your images,videos,
music and files.

1.Make sure that you device is turned off,and then use
the key to open the storage card slot.

2.Insert the memory card into the slot with its gold contacts
facing down until it clicks into place.

Placing the cards as below images:

T-Flash

Dual SIM Single SIM

Charging the Battery

The battery provided with the device may have remain power.
But before you start using your device,it is recommended
that you charge the battery.Some batteries perform best after
several full charge/discharge cycles.

Use AC cable to connect your device and the AC.
Connect the USB connector of the AC adaptor to the sync
connector on your device.

Note:Only the AC adapter and USB sync cable provided with
your device can be used to charge the device.

As the battery is being charged while the device is on, a
charging icon appears in the title bar of home screen.

After the battery has been fully charged, afull battery icon
appears in the title bar of the home screen.

Warning:As a safty precaution,the battery stops charging
before it overheats.

Information Safety

Please comply with the rules that formulate to protect
users and their environment.

Road Safety

Unless any emergency,before installing hand-free device
which can ensure your safety and move freely,do not use
your phone when driving.In order to give you full attention
to driving, stop and park safely before making a call.You
must comply with any current legislation.
In the situation that the phone being fully protected,some
electronic system installed in the car may be interfered by
the radio waves sent from the phone.
Suggest to use your phone in the car that with an outer
antenna.
Only qualified technicians can install your phone on the car.

Environment Condition

Please comply with the current rules and regulations in place.
Always switch your phone off whenever the use of phone is
prohibited or when it may cause interferences or hazards.

System Update Safety

Normally,the device can only support authorized updates of
the operating system.

If the operating system is not authorized, it may cause that the
updated operating system does not meet the requirements of
mobile terminal security capabilities, there are risks of system
information safety.

FCC Warning:

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information

SAR tests are conducted using standard operating positions accepted by the FCC with the

phone transmitting at its highest certified power level in all tested frequency bands. Before a

new model phone is available for sale to the public, it must be tested and certified to

the FCC that it does not exceed the exposure limit established by the FCC, Tests for each

phone are performed in positions and locations (e.g. at the ear and worn on the body)as

required by the FCC.

For body worn operation, this model phone has been tested and

guidelines when used with an accessory designated for this product or when used with an accessory that

Contains no metal and that positions the handset a minimum of 1.0 cm from the body. Non compliance

with the above restrictions may result in violation of RF exposure guidelines.

meets the FCC RF exposure