Moza Slypod E User Manual
SLYPOD E
User Manual
Disclaimer and Warning
Thank you for purchasing the MOZA Slypod E!
● This document is related to the safety use and legal rights of your
equipment. Please read it carefully before the first use.
● By using this product, you are deemed to have read, understood,
endorsed and accepted all the terms and content of this
statement. You are solely responsible for the use of this product and
the consequences thereof. You undertake to use this product for
legitimate purposes and agree to the terms and any relevant
regulations, policies and guidelines formulated by Shenzhen
Gudsen Technology Co., Ltd. (hereinafter referred to as Gudsen).
Gudsen is not responsible for damage, injury or any legal problems
caused by the direct or indirect use of this product. Users should
follow all safety guidelines including but not limited to this
document.
● MOZA Slypod E is professional videography equipment. Users need
to have professional videography and safety knowledge, and
need to be careful. Please read the user manual carefully before
the first use.
● This product is not a toy and not suitable for use by minors. Do not
allow children to operate this product.
● Do not use MOZA Slypod E with products or accessories that are not
provided or recommended by Gudsen, and please strictly follow
the safety guidelines in the product manual.
● The final interpretation of this document belongs to Shenzhen
Gudsen Technology Co., Ltd. Updates are subject to change
without notice. Please visit the official website www.gudsen.com for
the latest product information.
Safety Guidelines
1. Safety Instructions for Charging
Do not use an unofficial charging cable for external DC power to
prevent the gimbal from working properly and causing unnecessary
damage.
● Do not put the equipment into the water or get it wet!
● Do not charge the equipment under fire or extremely hot
conditions! Do not use or store the equipment near heat sources
such as fire or heaters! If the battery leaks or gives off an odor,
remove the equipment from the open fire immediately!
● Do not use the unqualified adapter to charge the equipment!
● Do not disassemble and install the equipment to prevent the
gimbal from working properly!
● Do not use the equipmentin extremely harsh environments to
prevent the gimbal from working properly!
● Do not pierce the equipment with nails or other sharp objects. Do
not hammer or pedal the equipment!
● Do not hit, throw or shake the equipment!
● Do not solder the equipment terminal directly!
● Do not disassemble the equipment in any way!
● Do not put the equipment into microwave or pressure vessel!
● Do not use if the battery emits odor, heat, deformation,
discoloration, or any other abnormality; If the equipment is in use or
charging, unplug the power adapter from the device and stop
using it immediately!
Battery Charging
The Slypod E is equipped with a Type-C interface, supporting 5V2A
low-speed charging. The fast charge protocol is not supported.Users
can select the matched charger according to actual needs.
Please use the TYPE-C interface to charge the battery and do not use
external power sources such as wall outlet or car cigarette lighter to
charge the battery.
Battery Charging Instructions
The MOZA Slypod E has a built-in lithium battery. Fully charge the
battery before the first use to active the battery.The solid red light
indicate that the equipment is charging, and the solid blue light
indicate that the charging is complete. With universal Type-C port, the
MOZA Slypod E can be charged by phone charger or power bank.
The charging stops automatically when the battery gets full.
1. Please use the original charging cable provided in the package!
(5V 2A low-speed charging input is supported, the fast charge
protocol is not supported)
2. Please do not overcharge or over-discharge the battery.
Otherwisethe battery will be damaged;
3. Recharge and discharge the battery every 3 months to keep it
activated if it is left unused for a long time
Battery Protection
The Slypod E has under-voltage, overcurrent protection function.
Battery protection state will be triggered by abnormal conditions such
as overuse or short circuit. When the battery enters the protection
state, it stops output with a warning red color light.
MOZA Slypod E Overview
Arca-Swiss
Quick Release
SLYPOD E
Main Body
Indicator
Light
Power Button
Quick Release Adapter
1/4” and 3/8” Extension Hole
Quick Release
Screw
SLYPOD E
Quick Mounting
Port
Operation Button
1
Charging
Port
Adapter (accessory)
1/4” to 3/8” Adapter
Screw
1/4” Extension Hole
Quick Mounting
Port
There is a 1/4" extension screw hole on the top of the adapter, and it
comes with a 1/4” to 3/8” adapter screw to meet different shooting
devices.
Arca-Swiss Quick Release
1/4” Screw Hole
There is a 1/4” screw hole and a 3/8” screw hole on the body of
Arca-Swiss quick release which can meet various extension needs.
(When connecting the body with monopod or tripod via the Arca-Swiss
quick release, the Slypod E can be used as a motorized slider)
3/8” Screw Hole
Tripod
There is a 1/4" extension screw on top of the tripod, which can be used
for support and extension, the tripod can be used as a handle when the
legs are not open. (The main body must be connected to the stand
adapter to connect the tripod)
Stand Adapter
There are 1/4" extension screw holes on the stand adapter which
enable the body to connect with tripod or other accessories to
mount different shooting devices.
1/4” Screw Hole
Mounting
Mounting the adapter
Push the quick mounting port from the bottom of the adapter into the groove
at the top of the pole until fully fit. After connected, tighten the knob
clockwise to secure the adapter onto the pole; Turn counter-clockwise to loosen
the knob , then turn the knob counter-clockwise to detach the adapter
from the pole. Reset the quick release knob after the adapter is detached.
4
4
2
Loading...