Moyer Diebel 383HT Installation Manual

Installation, Operation, Cleaning and Maintenance Manual

High Temperature
Undercounter
Dishwasher

Model:
383HT

Hot water sanitizing with 4kW built-in
stainless steel electric booster

Option:

3765 Champion Boulevard
Winston-Salem, NC 27105
[phone] Fax: [phone]
Toll-free: 1 [phone]

6kW built-in electric stainless steel booster

Issue Date: 4.19.16

Manual P/N 0513886 rev. —

For machines beginning with S/N W160458678 and above

2674 N. Service Road, Jordan Station
Ontario, Canada L0R 1S0
[phone] Fax: [phone]
Toll-free: 1( 800) 263-5798

Printed in the USA

National Service Department

In Canada: In the USA:

Toll-free: [phone] Toll-free: [phone]
Tel: [phone] Tel: [phone]
Fax: [phone] Fax: [phone]
email: [e-mail] email: [e-mail]

ATTENTION

The model no., serial no., voltage, Hz

and phase are needed to identify your

machine and to answer questions.

The machine data plate

is located on the right front corner

of the lower panel

Please have this information ready

if you call for service assistance.

The USGBC Member Logo is a trademark owned by the U.S. Green Building Council and is used by permission. The logo signifies only that

Moyer Diebel is a USGBC member; USGBC does not review, certify nor endorse the products or services offered by its members.

COPYRIGHT © 2016 All rights reserved Printed in the USA

Product Registration

REGISTER YOUR PRODUCT to
ACTIVATE YOUR WARRANTY.

4:34 PM 44%

Three ways to register:

• Use your mobile device to scan the QR code located on the front panel of your

machine or enter our URL http://www.moyerdw.us/383HT.

• Visit our website at:

http://www.moyerdiebel.com/service/ for the USA
http://www.championindustries.com/warranty-registration for Canada

• Use the FAX FORM on the next page.

PRODUCT REGISTRATION

Product Registration

BY FAX

COMPLETE THIS FORM AND FAX TO:

[phone] in the USA

1-[phone] in Canada

PRODUCT REGISTRATION CARD

Model

Date of Installation:
Company Name:

Serial #

Address:
Telephone #: ( ) --­Contact:

Installation Company:
Address:
Telephone #:
Contact:

FAILURE TO REGISTER YOUR PRODUCT MAY VOID YOUR WARRANTY

(Street) Province Postal Code

IMPORTANT IMPORTANT

Revision History

Revision History

We reserve the right to make changes to this manual without notice and without incurring any
liability by those changes. Equipment owners may request a revised manual, at no charge, by
calling 1 [phone] in the USA or by calling 1 [phone] in Canada.

Revision Revised Serial Number Revision
Date Pages Effectivity Description

4.19.16 All W160458678 Released first edition

i

Limited Warranty

LIMITED WARRANTY

Moyer Diebel. (herein referred to as The Company), 3765 Champion Blvd., Winston-Salem, North Carolina 27105, and
2674 N. Service Road, Jordan Station, Canada, L0R 1S0, warrants machines, and parts, as set out below.

Warranty of Machines: The Company warrants all new machines of its manufacture bearing the name "Moyer Diebel"

and installed within the United States and Canada to be free from defects in material and workmanship for a period of one
(1) year after the date of installation or fifteen (15) months after the date of shipment by The Company, whichever occurs first.
[See below for special provisions relating to glasswashers.] Warranty registration must be submitted to Moyer Diebel within
ten (10) days after installation either online on the Moyer Diebel website (http://www.moyerdiebel.com/service/) for the USA
or http://www.championindustries.com/warranty-registration for Canada or by fax on the form provided in the front of this
manual. If warranty registration is not returned to The Company within such period, the warranty will expire after one year
from the date of shipment. The Company will not assume any responsibility for extra costs for installation in any area where
there are jurisdictional problems with local trades or unions. If a defect in workmanship or material is found to exist within
the warranty period, The Company, at its election, will either repair or replace the defective machine or accept return of the
machine for full credit; provided; however, as to glasswashers, The Company's obligation with respect to labor associated
with any repairs shall end (a) 120 days after shipment, or (b) 90 days after installation, whichever occurs first. In the event
that Moyer Diebel elects to repair, the labor and work to be performed in connection with the warranty shall be done during
regular working hours by The Company's authorized service technician. Defective parts become the property of The Company.
Use of replacement parts not authorized by The Company will relieve The Company of all further liability in connection with its
warranty. In no event will The Company's warranty obligation exceed The Company's charge for the machine. The following
are not covered by The Company's warranty:

a. Lighting of gas pilots or burners.
b. Cleaning of gas lines.
c. Replacement of fuses or resetting of overload breakers.
d. Adjustment of thermostats.
e. Adjustment of clutches.
f. Opening or closing of utility supply valves or switching of electrical supply current.
g. Cleaning of valves, strainers, screens, nozzles, or spray pipes.
h. Performance of regular maintenance and cleaning as outlined in operator’s guide.
i. Damages resulting from water conditions, accidents, alterations, improper use, abuse,
tampering, improper installation, or failure to follow maintenance and operation procedures.
j. Wear on Pulper cutter blocks, pulse vanes, and auger brush.

Examples of the defects not covered by warranty include, but are not limited to: (1) Damage to the exterior or interior finish
as a result of the above, (2) Use with utility service other than that designated on the rating plate, (3) Improper connection to
utility service, (4) Inadequate or excessive water pressure, (5) Corrosion from chemicals dispensed in excess of recommended
concentrations, (6) Failure of electrical components due to connection of chemical dispensing equipment installed by others,
(7) Leaks or damage resulting from such leaks caused by the installer, including those at machine table connections or by
connection of chemical dispensing equipment installed by others, (8) Failure to comply with local building codes,
(9) Damage caused by labor dispute.

Warranty of Parts: The Company warrants all new machine parts produced or authorized by The Company to be
free from defects in material and workmanship for a period of 90 days from date of invoice. If any defect in material and
workmanship is found to exist within the warranty period The Company will replace the defective part without charge.

DISCLAIMER OF WARRANTIES AND LIMITATIONS OF LIABILITY. THE COMPANY'S
WARRANTY IS ONLY TO THE EXTENT REFLECTED ABOVE. THE COMPANY MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED, TO ANY WARRANTY
OF MERCHANTABILITY, OR FITNESS OF PURPOSE. MOYER DIEBEL SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSE-QUENTIAL DAMAGES. THE REMEDIES SET OUT ABOVE ARE THE
EXCLUSIVE REMEDIES FOR ANY DEFECTS FOUND TO EXIST IN THE COMPANY'S DISHWASHING
MACHINES AND THE COMPANY'S PARTS, AND ALL OTHER REMEDIES ARE EXCLUDED,
INCLUDING ANY LIABILITY FOR INCIDENTALS OR CONSEQUENTIAL DAMAGES.

Moyer Diebel does not authorize any other person, including persons who deal in Moyer Diebel dishwashing machines to change this
warranty or create any other obligation in connection with Moyer Diebel Dishwashing Machines.

ii

Table of Contents

Table of Contents

Revision History ................................................................................................................ i

Limited Warranty ............................................................................................................. ii

Safety Symbols ................................................................................................................iv

Installation ......................................................................................... 1

Receiving and Placement ............................................................................ 1

Installation Codes ...................................................................................... 2

Water Connection ..................................................................................... 3

Drain Connection ...................................................................................... 4

Electrical Connection .................................................................................. 6

Detergent Set-up ........................................................................................ 8

Rinse-Aid Set-up ......................................................................................... 9

Operation ......................................................................................... 10

Control Panel Description.......................................................................... 10

Loading Wares ........................................................................................ 11

Fill Mode ................................................................................................ 12

Wash Mode ............................................................................................ 13

Auto-Clean Drain Mode ............................................................................ 14

Cleaning ............................................................................................15

Wash and Rinse Spray Arms, Scrap Screens, Exterior .................................. 15

Deliming ................................................................................................. 16

Maintenance .......................................................................................17

Schedules ................................................................................................17

Troubleshooting Chart ............................................................................... 18

Timing Chart and Electrical Schematic ....................................................19

Timing Chart ............................................................................................ 19

Electrical Schematic .................................................................................. 20

Drain Water Tempering Kit Installation ...................................................21

iii

Safety Symbols

Safety Symbols

The following symbols are used throughout this manual to alert the reader to important information.

WARNING:

Warnning statements indicate a condition or practice that can result in personal injury
or possible death.

CAUTION:

Caution statements indicate a condition or practice that can result in damage to the
machine or associated equipment.

DO NOT:

Do not statements indicate that a condition or practice will diminish the effective
operation of the machine.

OKAY:

Okay statements indicate that a condition or practice is correct and should be
followed.

NOTE:

Note statements highlight important information necessary for the operation of the
machine.

iv

Receiving/Placement/Installation Codes

Receiving

1. Inspect the outside of the dishwasher carton for signs of damage.

2. Remove the carton and inspect the dishwasher for damage.

3. Check for any options or accessories that may have shipped with your

dishwasher.

4. Register by fax using the form at the front of this manual or online at:

http://www.moyerdiebel.com/service for the USA.
http://www.championindustries.com/warranty-registration for Canada.

CAUTION:

Be careful when lifting and moving the machine to avoid damage.

Placement

1. Compare the installation site utility connections with the dishwasher utility connections and
make sure they are the same.

2. Level the machine using the four leveling feet. Level side-to-side and front-to-back.

3. Plumbing connections must be made before the electrical installation begins.

4. The dishwasher can be installed as a free-standing unit or under a counter-top. The typical
counter-top height in most locations is 34" [86cm].

5. It is highly recommended that the underside of the counter-top be clad in metal.

6. Under counter installations should provide storage space for the dishwasher chemical
supply containers. Do not elevate the containers above the finished floor.

7. Chemical supply containers should be placed as close to the machine as possible.

8. The chemical tubing taped to the back of the machine must be repositioned before
permanently placing the machine.

9. Place the dishwasher in its permanent location.

L

VE

10. Remove the lower front panel in preparation for

LE

utility installations.

L

EVE

L

Fig. 1 -

Do not elevate chemical containers

30

20 40

psi

50

10

0 60

LEVEL ADJUSTMENT

Fig. 2 -

Level the machine.

1