MOXA Multiport Serial Board
Windows 2003 Driver Installation Guide
First Edition, June 2003
Moxa Technologies Co., Ltd.
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
www.moxa.com
support@moxa.com.tw
MOXA Multiport Serial Board
Windows 2003 Driver Installation Guide
The software described in this manual is furnished under a license agreement and may be used only in accordance with the
terms of that agreement.
Copyright Notice
Copyright 2003 Moxa Technologies Co., Ltd.
All rights reserved.
Reproduction without permission is prohibited.
Trademarks
MOXA is a registered trademark of Moxa Technologies Co., Ltd.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of Moxa.
Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the products
and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa Technologies assumes no
responsibility for its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Table of Contents
Chapter 1 Introduction ................................................................................ 4
Chapter 2 Driver Installation for PCI Boards under Windows 2003 ............ 5
Chapter 3 Driver Installation for ISA Boards under Windows 2003 ............ 8
Chapter 4 Changing the Properties of Multi-port Boards .......................... 16
Chapter 5 Checking for the Installation Result.......................................... 20
Chapter 6 Uninstalling the Driver.............................................................. 22
1
1
Chapter 1 Introduction
Welcome to the driver installation guide under Windows 2003 for MOXA Multiport Serial Boards. This
installation guide is for all series of MOXA multiport serial boards, including PCI, ISA, and universal PCI
boards.
The rest of this installation guide is divided into the following chapters:
Chapter 2, Driver Installation for PCI Boards under Windows 2003, sets forth the steps for installing the
driver for PCI boards under Windows 2003.
Chapter 3, Driver Installation for ISA Boards under Windows 2003, elaborates on the steps for installing the
driver for ISA boards under Windows 2003.
Chapter 4, Changing the Properties of Multiport Boards, tells you how to configure the properties of your
multiport boards when needed.
Chapter 5, Checking the Installation, points out 3 approaches to check if the installation is successful.
Chapter 6, Uninstalling the Driver, shows you how to uninstall the driver.
The Windows 2003 driver for MOXA’s multiport boards supports the following products:
z PCI Boards: C104H/PCI, C104HS/PCI, C168H/PCI, CP-132, CP-132I, CP-132S, CP-132IS, CP-114,
CP-114I, CP-114S, CP-114IS
z ISA Boards: C104P, C104H, C104HS, CI-104J, CI-104JS, C168P, C168H, C168HS, CI-104J, CI-132,
CI-132I, CI-132IS, CI-134, CI-134I, CI-134IS
z cPCI Boards: CT-114I
z Universal PCI Boards: CP-104UL, CP-104JU, CP-168U, CP-132UL, CP-132U-I, CP-134U, CP-134U-I
For more information about our multiport board products or technical documents, contact your RSM or visit
our website at www.moxa.com
.
Chapter 2 Driver Installation for PCI Boards under
This chapter includes information about how to install the driver for PCI boards under Windows 2003. Before
you start the installation, you need to follow the steps for hardware installation in the user’s manual enclosed
with the product you purchased. The following steps are set forth using CP-114 Series as an example.
Installing the Driver
1. After installing the PCI board and powering on your PC, Windows 2003 will auto detect and find the PCI
board you just added. The Found New Hardware window will open at the bottom right corner of the
desktop.
2
2
Windows 2003
2. The Welcome to the Found New Hardware Wizard window will open automatically. Select Install the
software automatically (Recommended) and click on Next to continue.
3. The Installation Wizard will start searching for the communication port.
4. The next window that opens cautions you that although this software hasn’t passed Windows Logo testing,
this driver has already been tested and been shown that it can support Windows OS. Click on Continue
Anyway to proceed.
5. A window will open showing the setup file of MOXA Port 0 is being copied.
6. A window will open showing the driver installation for MOXA Port 0 is completed.
7. Repeat steps 2 to 6, until the driver installation for every port is completed.