Moxa Technologies VPort P06HC-1MP-M12, VPort P06HC-1MP-M12-CAM36 Quick Installation Manual

P/N: 1802000061011

*1802000061011*

VPort P06HC-1MP-M12

Quick Installation Guide

Moxa IP Camera

Edition 2.0, February 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:
Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):
Toll

-free: 800-820-5036

Tel:

[phone]

Fax:

[phone]

Moxa Europe:
Tel:

[phone]

Fax:

[phone]

Moxa Asia-Pacific:
Tel:

[phone]

Fax:

[phone]

Moxa India:
Tel:

[phone]

Fax:

[phone]



2017 Moxa Inc. All rights reserved.

- 2 -

Overview

The VPort P06HC-1MP-M12 square-type IP cameras provide an HD (720P,
1280 x 720) video image, and feature 3 H.264/MJPEG video streams,
giving them the versatility and ruggedness to excel in many different
installations and environments for IP video surveillance applications. In
addition, the cameras comply with a portion of EN 50155 specifications,
covering operating temperature, power input voltage, surge, ESD, and
vibration, making them suitable for a variety of industrial applications.
The cameras feat ure a -25 to 55°C operating temperat ure, a rugged M12
Ethernet port, 1 built-in microphone, 1 digital input, PoE power inputs,
IP66 rain and dust protection, and a selectable lens.

Package Checklist

Moxa’s VPort P06HC-1MP-M12 is shipped with the following items. If any
of these items are missing or damaged, please contact your customer
service representative for assistance.

1 × VPort P06HC-1MP-M12 (lens included)

Standard Temperature Models

Lens

VPort P06HC-1MP-M12-CAM36

3.6 mm

Accessories Package

Torx screw

driver for
loosening
the
camera’s
front lens

cover

Silica gel dessicant and
hook fastener for absorbing

the moisture inside the
camera

2 L-type installation kits and 4

nylock screws

for mounting the

camera

Sticker for Camera Mounting Positions

 Quick installation guide (printed)

- 3 -

 Documentation and Software CD (includes User’s Manual, Quick

Installation Guide, and VPort Utility)

 Warranty card

NOTE

Check the model name on the VPort’s s ide la bel to determine if
the model name is correct for your order.

NOTE

This product must be installed in compliance with your loc al la ws
and regulations.

Features

• 1/2.7”HD progressive CMOS image sensor

• Video stream up to 30 frames/sec at WXGA (1280x800) resolution

• High image quality with WDR (wide dynamic ran ge) and DNR (D igital
Noise Reduction) supported

• Minimum illumination is up to 0.2 lux (c olor)

• Supports MJPEG and H.264 Dual Codecs

• Provides 3 video streams for H.264 and MJPEG simultaneously

• Supports video quality configuration with fixed bit rate (CBR) and
fixed quality (VBR)

• Video latency under 200 ms

• DynaStream™ for network efficiency with dynamic frame rate change

• CBR Pro™ supported for high image quality in limited bandwidth
transmissions

• WXGA/720P/SVGA/Full D1/4CIF/VGA/CIF/ QCIF resolution

• TCP, UDP, and HTTP network transmission modes

• Supports DHCP OPT66/67 for automatic configuration from a TFTP
server, making it easy to batch configure several units

• Supports RTSP streaming

• Supports multicast (IGMP) video streaming

• Supports SNMP (V1/V2C/V3) for network system integration and
management

• Supports QoS (ToS) for transmission priority

• Built-in web server for easy configuration

• Accessible IP filtering

• UPnP supported

• Complies with all EN 50155 mandatory test items*

*This product is suitable for rolling stock railway applications, as de fined
by the EN 50155 standard. For a more detailed statement, click here:

www.moxa.com/doc/specs/EN_50155_Compliance.pdf

• 1 10/100BaseT(X) port with M12 D-code connector

• 1 built-in microphone for audio input

• 1 digital input with 5-pin M12 connector for external events

• IP66 rain and dust protection

• PoE (Power-over-Ethernet, IEEE 802.3af) supported

• -25 to 55°C (EN 50155, class T1) operating temperature for rolling
stock environments

• CE, FCC, UL 60950-1

• Built-in tamper alarm and Video Motion Detection (VMD)

• Pre, Trigger, and post snapshot images supported

• Sequential snapshot images supported

• Supports SMTP and FTP for alarm message transmission

• Supports HTTP event server

- 4 -

• 5-year warranty

Product Description

Appearance

• 4-pin female D-code M12 Ethernet connector: Can be used for
both the PoE power supply (Mode A) and Auto MDI/MDI-X Ethernet
connection

NOTE

To connect the VPort P06HC-1MP-M12 to a network, use an
Ethernet cable with D

-code M12 connector and an M12 PoE

swi

tch or RJ45 PoE switch.

M12 male to M12 male cable

M12 PoE Switch (e.g.,

TN-5508-4PoE)

M12 male to RJ45 cable

RJ45 PoE switch (e.g.,

EDS-P510)

NOTE

The power input rating of the VPort P06HC-1MP-M12 is 48 VDC,

0.13 A, w ith maximum power consumption approximately 6.3 W.

- 5 -

NOTE

The equipment is designed for in building installation only and is
not intended to be connected to exposed (outside a plant)
networks

• 5-pin M12 male connector: The VPort P06HC-1MP-M12 supports
one digital input with 5-pin M12 male connector. This DI is used for
connecting with external device for triggering an event or alarm.

• Digital input:

M

ax. 8 mA,

Low: +13 V to +30 V; High: -30 V to +3 V

NOTE

This digital input is for connecting with an external device, such
as a button, for triggering an event and a larm. The VPort
P06HC

-1MP-M12 can send messages via an IP network to the

management software at a remote site.

• Built-in microphone: The VPort P06HC-1MP-M12 is equipped with a
built-in microphone to receive external sounds. The sound will be
digitized and compressed as an audio stream for network
transmission with the video stream.

NOTE

The effective distance for the VPort P06HC-1MP-M12’s built-in
microphone is 100 cm.

• Removable lens cover: The VPort P06HC-1MP-M12 is designed with
a removable cover for fine-tuning the lens angle manually. The user
can remove this lens cover after loosening the 6 torx screws.

NOTE

The VPort

P06HC-1MP-M12’s optical lens cover is coated with a

high performance waterproof coating. Please use the scrubbing
cloth to light clean the cover.

NOTE

The color of the lens cover can be customized based on your
installation environment. Please contact

your Moxa sales

representative for customization service.

- 6 -

Inside the Camera

• Thumb screw for fixing the lens’s position: To tune the lens’s
position, loosen the thumb screw, and then retighten it after the
position tuning is done.

• Lens with fixed focal length: The VPort P06HC-1MP-M12 series
supports a fixed focal-length lens. Choose the appropriate
focal-length lens based on the viewing angle and object distance.

• Board plate screws: these 2 screws are for loosening the board
plate, which can be pulled out for tuning the camera lens position.

Hardware Installation

NOTE

T

o flush mount the VPort P06HC with an intercom, use the

VP

-FD1 accessory (must be ordered separately) to install the

camera

. If you do not want to use the VP-FD1, refer to the

dimensio

ns on the installation sticker for customizing your own

installation.



using

the VP-FD1 for installing with an

intercom

- 7 -

VP-FD1

Step 1: Screw the 2 L-type installation plates onto the VPort P06HC.

Vertical mountable

Horizontal mountable

Step 2: Use the installation sticker to drill the ho les for flush-mounting
the VPort P06HC with the VP-FD1.

- 8 -

NOTE

The screw holes for mounting the 2 VP-FD1’s mounting kits are
countersunk holes with 8 mm top diameter and 4.3 mm chamfer.
Take this into consideration when drilling these 4 screw holes.

Step 3: Install the VP-FD1’s mounting kit.

Screw 4 nylock M4 screws on the 4
counters

unk screw holes with 2

VP

-FD1’s mounting kits.

Front

view

Re

ar view

Step 5: Mount the VPort P06HC with the VP-FD1’s mounting kit.

- 9 -

Step 6: Mount the VP-FD1’s front decorative plate on the wall.

NOTE

The type and color of VP-FD1 can be customized by request.
Please contact a Moxa sales representative for this customization
service.

Software Installation

Step 1: Configure the VPort P06HC-1MP-M12’s IP address.

When the VPort P06HC-1MP-M12 is first powered on, the POST (Power On
Self Test) will run for a few moments (about 30 seconds). The network
environment determines how the IP address is assigned.

Network Environment with DHCP Server

For this network environment, the unit’s IP address will be assigned by
the network’s DH CP server. Refer t o the DHCP server’s IP address table to
determine the unit’s assigned IP address. You may also use the Moxa
VPort and EtherDevice Configurator Utility (edscfgui.exe), as described
below:

Using the Moxa VPort and EtherDevice Configurator Utility
(edscfgui.exe)

1. Run the edscfgui.exe program to search for the VPort. After the
utility’s window opens, you may also click on the Search button

to initiate a search.

2. When the search has concluded , the Model Name, MAC address, IP
address, serial port, and HTTP port of the VPort will be listed in the
utility’s window.

- 10 -

You can double click the selected VPort, or use the IE web browser to
access the VPort’s web-based manager (web server).

Non DHCP Server Network Environment

If your VPort 16-M12 is connected to a network that does not have a
DHCP server, then you will need to configure the IP address manually.
The default IP address of the VPort 16-M12 is 192.168.127.100 and the
default subnet mask is 255.255.255.0. Note that you may need to c hange
your computer’s IP address and subnet mask so that the computer is on
the same subnet as the VPort.

To change the IP address of the VPort manually, access the VPort’s web
server, and then navigate to the System Configuration  Network 
General page to configure the IP address and other network settings.
Check Use fixed IP address to ensure that the IP address you assign is not
deleted each time the VPort is restarted.

Step 2: Accessing the VPort P06HC-1MP-M12’s web-based manager
Type the IP address in the web browser’s address input box and then

press enter.
Step 3: Install the ActiveX Control Plug-in
A security warning message will appear the first time you access the

VPort’s web-based manager. The message is related to installing the
VPort AcitveX Control component on your PC or notebook. Click Yes to
install this plug-in to enable the IE web browser for viewing video images.

NOTE

For Windows XP SP2 or later operating systems , the ActiveX
Control component will be blocked for system security reasons.
In this case, the VPort’s security warning message window may
not appear. You

should unlock the ActiveX control blocked

function or disable the security configurat ion to enable the
installation of the VPort’s ActiveX Control component.

Step 4: Access the homepage of the VPort P06H C-1MP-M12’s web-based
manager.

After installing the ActiveX Control component , the homepage of the
VPort P06HC-1MP-M12’s web-based manager will appear. Check the
following items to make sure the system was installed properly:

1. Video Images

2. Video Information

- 11 -

Step 5: Access the VPort’s system configurat ion .
Click on System Configuration to access the overview of the system

configuration to change the configuration. Model N ame, Server Name,
IP Address, MAC Address, and Firmware Version appear on the
green bar near the top of the page. Use this information to check the
system information and installation.

For details of each configuration, check the user’s manual on the software
CD.

Wiring Requirements

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or
wiring your Moxa VPort P06HC

-1MP-M12. Calculate the

maximum possible current in each power wire and common wire.
Observe all electrical codes dictating the maximum current
allowable for each wir

e size. If the current goes above the

maximum ratings, the wiring could overheat, causing serious
damage to your equipment.

- 12 -

You should also pay attention to the following:

• Use separate paths to route wiring for power and devices. If power
wiring and device wiring paths must cross, make sure the wires are
perpendicular at the intersection point.

• You can use the type of signal transmitted through a wire to
determine which wires should be k ept separat e. The ru le of thumb is
that wiring that shares similar electrical characteristics can be
bundled together.

• Keep input wiring and output wiring separated.

• We strongly advise labeling wiring to all devices in the system.

Dimensions (mm)

Front View

Bottom View

VP-FD1

(front decorative plate)

VPort P06HC’s L-type mounting

kit

Specifications

Camera

Sensor

1/2.7” HD progressive scan CMOS

Lens

3.6 mm fixed focal length

Angle of view

3.6 mm, F1.6: Diagonal 125°, Horizontal 104°,
Vertical 54°

Illumination
(Low light sensitivity)

0.2 Lux at F=1.2, color
Synchronization

Internal

White Balance

ATW/AWB (range: 3200 to 10000°K)

Electronic Shutter

Auto, 1/30 to 1/25000 sec.

- 13 -

S/N Ratio

50 dB (Gamma, Aperture, AGC, OFF; DNR ON)

DNR

Built-in DNR

WDR

Level 1 to 8

AGC Control

2X, 4X, 8X, 16X

Flickerless Control

Automatic/ 50Hz/60Hz mode

Black level control

High/Medium/Low

Auto Exposure

Level ±5

Image Rotation

Flip, Mirror, and 180° rotation

Image Setting

Manual tuning with saturation, sharpness, an d
contrast

Video

Video Compression

H.264 (ISO/IEC 14496-10) or MJPEG

Video Output

Via Ethernet port

Video Streams

Maximum of 3 video streams (2 H.264 and 1

MJPEG)

• Stream 1: H.264, 1280 x 800 resolution (max.)

• Stream 2: H.264, 720 x 480 resolution (max.)

• Stream 3: MJPEG, 720 x 480 resolution (max.)

Note: Streams 2 and 3 must be set to the same resolution

Video Resolution and FPS (Frame per second):

NTSC

PAL

Size

Max. FPS

Size

Max. FPS

QCIF (cropping)

176 x 112

30

176 x 144

25

CIF(cropping)

352 x 240

30

352 x 288

25

VGA(cropping)

640 x 480

30

640 x 480

25

4CIF(cropping)

704 x 480

30

704 x 576

25

Full D1(cropping)

720 x 480

30

720 x 576

25

SVGA(cropping)

800 x 600

30

800 x 600

25

HD(cropping)

1280x720

30

1280x720

25

WXGA

1280x800

30

1280x800

25

Note: Except for 1280x800, the other resolutions are cropped images.

Video Viewing

• DynaStream™ supported for automatic frame

rate adjustment

• CBR Pro™ for good image quality in limited
bandwidth transmission

• 3 configurable privacy mask areas

• Adjustable image size and quality

• Timestamp and text overlay

• OSD (On screen Display) position adjustable

• Maximum of 5 simultaneous unicast
connections

• Digital PTZ with 4x zoom

Audio

Audio inputs

1, built-in microphone

Audio format

Mono, PCM (G.711)

Network

Protocols

TCP, UDP, HTTP, SMTP, FTP, Te lnet, NTP, DNS,

DHCP, UPnP, RTP, RTSP, ICMP, QoS,

SNMPv1/v2c/v3, DDNS, TFTP, OPT 66/67

Ethernet

1 10/100BaseT(X) Ethernet port, 4-pin M12
D-code female connector

- 14 -

GPIO

Digital Input

1, max. 8 mA
Low: +13 V to +30 V; High: -30 V to +3 V

Power Requirements

Input

Power-over-Ethernet (IEEE 802.3af)

Consumption

Maximum 6.3W

Physical Characteristics

Housing

IP66 rain and dust protection, met al housing with
transparent cover

Dimensions

109 x 68 x 90 mm (4.29 x 2.68 x 3.54 in)

Installation

Flush mounting

Environmental Limits

Operating
Temperature

-25 to 55°C (-13 to 131°F)
Storage Temperature

-40 to 85°C (-40 to 185°F)

Ambient Relative
Humidity

5 to 95% (non-condensing)
Conformal Coating

Available on request

Regulatory Approvals

Safety

UL 60950-1

EMI

FCC Part 15, CISPR 32 class A

EMS

IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V

IEC 61000-4-8

Rail Traffic

EN 50155*, EN 45545-2

*This product is suitable for rolling stock railway applications, as de fined

by the EN 50155 standard. For a more detailed statement, click here:

www.moxa.com/doc/specs/EN_50155_Compliance.pdf

Shock

IEC 61373

Freefall

IEC 60068-2-32

Vibration

IEC 61373

Note: Please check Moxa’s website for the most up-to-da t e certification
status.

MTBF (mean time between failures)

Time

1,275,915 hours

Standard

Telcordia, Ground Benign 25°C

Warranty

Warranty Period

5 years

Details

See www.moxa.com/warra nty

Alarm Features

• Intelligent Video: Camera tamper (Pending)

• Video Motion Detection: 3 independently configurable motion areas

• Scheduling: Daily repeat timing schedule

• Imaging: JPEG snapshots for pre/trigger/post alarm images

•

Email/FTP Messaging: Automatic transfer of stored images via email

or FTP as event-triggered actions

• Custom Alarms: HTTP event servers for setting customized alarm
actions

• Pre-alarm Buffer: 12 MB video buffer for JPEG snapshot images

- 15 -

Security

• Password: User level password protection

• Filtering: By IP address

• Encryption: HTTPS, SSH

Minimum Viewing System Requirements

• Pentium 4, 2.4 GHz

• 512 MB of memory

• Windows XP with SP3 and above, Windows 7

• Internet Explorer 9.x or above

• DirectX 9.0c or above

Software Development Kit

VPort SDK PLUS

Includes CGI commands, ActiveX Control, and API

library for customized applications or system

integration for third-party developer

Standard

ONVIF