Moxa Technologies VPort P06-1MP-M12 Quick Installation Manual
MOXA IP Camera
VPort P06-1MP-M12 Quick Installation Guide
First Edition, June 2012
2012 Moxa Inc. All rights reserved.
P/N: 1802000060010
Standard Temperature
Models
Wide Temperature
Models
Lens
VPort P06-1MP-M12-CAM36
VPort P06-1MP-M12-CAM36-T
3.6 mm
VPort P06-1MP-M12-CAM42
VPort P06-1MP-M12-CAM42-T
4.2 mm
VPort P06-1MP-M12-CAM60
VPort P06-1MP-M12-CAM60-T
6.0 mm
Torx screw driver for
4 sets of nut, gasket,
4 indented hexagon
head tapping screws for
on the celing
Overview
The VPort P06-1MP-M12 series is a compact, HD (720P, 1280 x 720)
video image, H.264/MJPEG IP dome camera designed for mobile video
surveillance applications. It features EN 50155 compliance,
vandal-proofing (EN 62262 IK8), -25 to 55°C or -40 to 75°C (-T model)
operating temperature, rugged M12 Ethernet port, 1 audio input, PoE
power inputs, IP66 rain and dust protection, dehumidifying membrane,
and selectable lens models, for the versatility and ruggedness required to
excel in many different installations and environments for mobile IP video
surveillance applications.
Package Checklist
Moxa’s VPort P06-1MP-M12 is shipped with the following items. If any of
these items is missing or damaged, please contact your customer service
representative for assistance.
1 × VPort P06-1MP-M12 (Lens included)
Screw handle accessory package
attaching/detaching
the upper case
Sticker for camera mounting positions
and spring washer for
mounting the camera
- 2 -
mounting the camera
NOTE
Check the model name on the VPort’s side label to determine if
the model name is correct for your order.
NOTE
This product must be installed in compliance with your local laws
and regulations.
Quick Installation Guide
Documentation and Software CD (includes User’s Manual, Quick
Installation Guide, and VPort Utility)
Warranty card
Features
• 1/2.7”HD progressive CMOS image sensor
• High image quality with WDR (wide dynamic range) and DNR (Digital
Noise Reduction) supported
• Minimum illumination is up to 0.2 lux (color)
• Supports MJPEG and H.264 Duall Codecs
• Provides 3 video streams for H.264 and MJPEG simultaneously
• Video stream up to 30 frames/sec at WXGA (1280x800) resolution
• Supports video quality configuration with fixed bit rate (CBR) and
fixed quality (VBR)
• Video latency under 200 ms
• DynaStream™ for network efficiency with dynamic frame rate change
• WXGA/720P/SVGA/ Full D1/ 4CIF/ VGA/ CIF/ QCIF resolution
• TCP, UDP, and HTTP network transmission modes
• Supports DHCP OPT66/67 for automatic configuration from TFTP
server, making it easy to batch configurate several units
• Supports RTSP streaming
• Support multicast (IGMP) video streaming
• Supports SNMP (V1/V2C/V3) for network system integration and
management
• Supports QoS (ToS) for transmission priority
• Built-in web server for easy configuration
• Accessible IP filtering
• UPnP supported
• Compliant with EN 50121-3-2 and relevant sections of EN 50155
(compliant with IEC 60571)
• 1 10/100BaseT(X) port with M12 A-code connector
• 1 audio input with water-proof RCA-type connector
• IP66 rain and dust protection, with dehumidifying membrane
• PoE (Power-over-Ethernet, IEEE 802.3af) supported
• EN 62262 IK8 level vandal resistance
• -25 to 55°C (EN 50155, class T1), or -40 to 75°C (EN 50155. Class TX)
operating temperature for rolling stock environments
• CE, FCC, UL 60950-1
• Built-in tamper alarm and Video Motion Detection (VMD)
• Pre, Trigger, and post snapshot images supported
• Sequential snapshot images supported
• Supports SMTP and FTP for alarm message transmission
• Supports HTTP event server
• 5-year warranty
- 3 -
NOTE
To connect the VPort P06-1MP-M12 to a network, use an
Ethernet cable with D
switch or RJ45 PoE switch
M12 D-code to M12 D-code
M12 PoE Switch (e.g.,
M12 D-code and RJ45 cable
RJ45 PoE switch (e.g.,
NOTE
The power input rating of the VPort P06
0.12 A, with maximum power consumption approximately 6 W.
NOTE
The equipment is designed for in building installation only and is
not intended to be
networks
Product Description
Appearance
• 4-pin A-code M12 Ethernet connector: Can be used for both the
PoE power supply (Mode A) and Auto MDI/MDI-X Ethernet connection
-code M12 connector and a M12 PoE
cable
TN-5508-4PoE)
EDS-P510)
-1MP-M12 is 48 VDC,
connected to exposed (outside plant)
- 4 -
NOTE
RCA audio connectors are popular and easily found in the market.
If you require any other kind of audio connector, please contact
your Moxa sales representative for customization service.
NOTE
The color of the form factor can be customized based on your
installation environment. Please
representative for customization service.
• RCA female connector: The VPort P06-1MP-M12 supports one
audio input with RCA female connector. The audio will be digitized
and compressed as an audio stream for network transmission with
the video stream.
• Solid plastic top cover: This top cover can be removed for tuning
the camera lens position.
• Transparent dome cover: The VPort P06-1MP-M12 is designed
with a transparent PC dome cover, which is vandal-proof with EN
62262 (IEC 62262) class IK8 level.
• 2 Torx screws for top cover: These 2 torx screws are designed
with anti-shedding to make installation more convenient. Use the
L-type torx screwdriver to remove or attach the top cover.
contact your Moxa sales
Inside the Camera
• Mounting screw holes: There are 4 mounting screw holes for
mounting the VPort P06-1MP-M12 on the ceiling or the accessory.
• Thumb screw for fixing the lens’s position: To tune the lens’s
position, loosen the thumb screw, and then retighten it after the
position tuning is done.
• Lens with fixed focal length: The VPort P06-1MP-M12 series
includes models with 3 different focal lengths. Choose the appropriate
focal-length lens based on the viewing angle and object distance.
• Hardware reset button: Use a pointed object to depress the reset
button to reboot or restore factor defaults.
Reboot: press the button one time.
Factory default: press the button and hold in for at least 5 sec.
- 5 -
Loading...