Moxa Technologies VPort 56-2MP Quick Installation Manual

 2014 Moxa Inc. All rights reserved.

P/N: 1802000560011

VPort 56-2MP Series

Quick Installation Guide

Second Edition, September 2014

- 2 -

Overview

The VPort 56-2MP series is the world’s first rugged IP camera that can
tolerate environmental temperatures ranging from -40 to 75°C without
cooling fan. It is an industrial-grade, H.264 box-type IP camera that
combines Full HD resolution (1920 x 1080), 10x optical zoom, and 16x
digital zoom to enhance surveillance system efficiency while delivering
state-of-the-art video quality. Optional housing and PT scanner
accessories are available for indoor and outdoor installation.

With a built-in removable IR-cut filter and automatic color mode switching,
the VPort 56-2MP series is suitable for both day and night use.
Highly-tuned ROI (Region of Interest), BLC (Back Light Compensation),
and sense up functions enable the VPort 56-2MP to produce exceptionally
clear images. The VPort 56-2MP can encode analog video into both H.264
and MJPEG video streams and can transmit up to 3 independent video
streams (2 in H.264, and 1 in MJPEG) simultaneously. Advanced video
encoding technology enables the camera to support up to 30 fps for each
of the H.264 and MJPEG streams.

Package Checklist

Moxa’s VPort 56-2MP series is shipped with the following items. If any of
these items is missing or damaged, please contact your customer service
representative for assistance.

• 1 VPort 56-2MP camera (see ordering information below)

• Terminal block accessory package (3-pin terminal block for power

input, 9-pin terminal block for RS-485 DX+ and DX- and I/O)

• Quick installation guide

• Documentation and software CD (includes user’s manual, quick

installation guide, and VPort utility)

• Warranty card

NOTE

Check the model name on the VPort’s side label to verify that the
model name is correct for your order.

NOTE

This product must be installed in compliance with your local laws
and regulations.

Ordering Information

• VPort 56-2MP-CAM10X: 0 to 60°C operating temperature

• VPort 56-2MP-CAM10X-T: -40 to 75°C operating temperature

• VPort 56-2MP-CAM10X-S-SC: 0 to 60°C operating temperature,

single mode fiber interface

• VPort 56-2MP-CAM10X-S-SC-T: -40 to 75°C operating
temperature, single mode fiber interface

- 3 -

Specifications

Camera

Sensor: 1/2.5” HD progressive scan CMOS

Lens: 6.3 to 63 mm auto focus zoom lens

Illumination:

• Color: 0.2 lux at F1.8

• B/W: 0.05 lux at F1.8

Synchronization: Internal

White Balance: ATW, AWB

Electronic Shutter:

AES: On/Off

Fix: 1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec

S/N Ratio: More than 50 dB (AGC off)

ICR Control: Auto (light sensor control) or DI control

DNR: Built-in 3D DNR

AGC Control: On/Off

Backlight Compensation: On/Off

Auto Exposure: On/Off

Image Rotation: Flip, Mirror, and 180° rotation

Auto Sense Up: On/Off, Max. 64x

Image Setting: Manually tune sharpness

Video

Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG

Video Output: via Ethernet

Video Streams: Up to 3 video streams (2 x H.264 and 1 x MJPEG)

• Stream 1: H.264, 1920 x 1080 resolution (max.)

• Stream 2: H.264, 1280 x 720 resolution (max.)

• Stream 3: MJPEG, full D1 resolution (max.)

Video Resolution and FPS (frames per second): Up to 30/25 FPS for
each of 3 independent streams at max resolution.

Video Viewing:

• DynaStream™ supported for automatic adjustment of frame rate

• Image stabilizer to reduce video shaking

• CBR Pro™ for optimized image quality within limited bandwidth

• 8 privacy mask areas provided

• Adjustable image size and quality

• Timestamp and text overlay

• Maximum of 10 simultaneous unicast connections

• ROI (Region of Interest) configuration for up to 3 areas

PTZ: Compatible with Videotec Ulisse Netcam PT scanner

Audio

Audio Inputs: 1 Line-in with 3.5 mm phone jack

Audio Outputs: 1 Line-out with 3.5 mm phone jack

Two-Way Audio: Full duplex two-way audio

Network

Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP,

RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP,

802.1X, SSL

Ethernet: 1 10/100BaseT(X) Ethernet port, RJ45 connector, or 1
100BaseFX, single mode

Standard: ONVIF