Moxa Technologies V2101, V2101-T-CE, V2101-T-XPE, V2101-T-LX Hardware User Manual
V2101
Hardware User’s Manual
www.moxa.com/product
Second Edition, January 2010
© 2010 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.
V2101
Hardware User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in
accordance with the terms of that agreement.
Copyright Notice
Copyright © 2010 Moxa Inc.
All rights reserved.
Reproduction without permission is prohibited.
Trademarks
MOXA is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the
part of Moxa.
Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but
not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this
manual, or to the products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no
responsibility for its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the
publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll-free: 1-888-669-2872
Tel: +1-714-528-6777
Fax: +1-714-528-6778
Moxa China (Shanghai office)
:
Toll-free: 800-820-5036
Tel: +86-21-5258-9955
Fax: +86-10-6872-3958
Moxa Europe
:
Tel: +49-89-3 70 03 99-0
Fax: +49-89-3 70 03 99-99
Moxa Asia-Pacific
:
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
Table of Contents
Chapter 1 Introduction..................................................................................................1-1
Overview..................................................................................................................... 1-2
Package Checklist......................................................................................................1-2
Product Features........................................................................................................ 1-3
V2101 Hardware Specifications.................................................................................. 1-3
Hardware Block Diagram............................................................................................ 1-5
Chapter 2 Hardware Introduction.................................................................................2-1
Appearance................................................................................................................. 2-2
Dimensions.................................................................................................................2-3
LED Indicators ............................................................................................................ 2-3
Reset Button...............................................................................................................2-4
Real Time Clock.......................................................................................................... 2-4
Chapter 3 Hardware Connection Description .............................................................3-1
Installing the V2101....................................................................................................3-2
Wiring Requirements..................................................................................................3-4
Connecting the Power......................................................................................3-4
Grounding the Unit ........................................................................................... 3-4
Connecting Data Transmission Cables.......................................................................3-5
Connecting to the Network...............................................................................3-5
Connecting to a Serial Device..........................................................................3-6
Installing an SD Card.................................................................................................. 3-6
Installing an SD Card for Storage Expansion................................................... 3-6
Connecting to the USB Device...................................................................................3-7
DI/DO.......................................................................................................................... 3-8
Connecting to a VGA Monitor..................................................................................... 3-8
Connecting to an LVDS Monitor ................................................................................. 3-9
Connecting to a Speaker or a He adphone ............................................................... 3-10
Chapter 4 BIOS Setup ...................................................................................................4-1
Entering the BIOS Setup Utility................................................................................... 4-2
Modifying the BIOS Main Settings.............................................................................. 4-3
Basic Configuration .......................................................................................... 4-3
System Security................................................................................................ 4-3
Advanced Settings...................................................................................................... 4-4
Hard Disk Boot Priority.....................................................................................4-4
Advanced BIOS Features................................................................................. 4-5
CPU Features................................................................................................... 4-5
Advanced Chipset Settings .............................................................................. 4-6
Peripherals.................................................................................................................. 4-7
OnChip IDE Device .......................................................................................... 4-8
Onboard Device................................................................................................ 4-9
Onboard I/O Chip Setup................................................................................. 4-10
Power.........................................................................................................................4-11
Hardware Monitor ..................................................................................................... 4-12
Load Defaults............................................................................................................ 4-12
Exiting the BIOS Setup.............................................................................................4-13
Upgrading the BIOS.................................................................................................. 4-14
Appendix A Regulatory Approval Statement ................................................................ A-1
1
1
Chapter 1 Introduction
The V2101 embedded computers are based on the Intel Atom Z510PT x86 processor, and feature
2 serial ports, dual Gigabit LAN ports, 4 USB 2.0 hosts, and an SD socket. The V2101 Series
offers both VGA and LVDS outputs, making it particularly well-suited for industrial applications,
such as SCADA and factory automation.
The V2101 computers’ 2 serial ports make them ideal for connecting a wide range of serial
devices, and the dual 10/100/1000 Mbps Ethernet ports offer a reliable solution for network
redundancy, promising continuous operation for data communication and management. As an
added convenience, the V2101 computers have 3 DIs and 3 DOs for connecting digital
input/output devices. In addition, the SD and USB sockets provide the V2101 computers with the
reliability needed for industrial applications that require data buffering and storage expansion.
Pre-installed with Linux, Windows CE 6.0, or Windows Embedded Standard 2009, the V2101
Series provides programmers with a friendly environment for developing sophisticated, bug-free
application software at a lower cost.
In this chapter, we cover the following topics:
Overview
Package Checklist
Product Features
V2101 Hardware Specifications
Hardware Block Diagram
V2101 HW User’s Manual Introduction
Overview
The V2101 embedded computers are based on the Intel Atom Z510PT x86 processor, and feature
2 serial ports, dual Gigabit LAN ports, 4 USB 2.0 hosts, and an SD socket. The V2101 Series
offers both VGA and LVDS outputs, making it particularly well-suited for industrial applications,
such as SCADA and factory automation.
The V2101 computers’ 2 serial ports make them ideal for connecting a wide range of serial
devices, and the dual 10/100/1000 Mbps Ethernet ports offer a reliable solution for network
redundancy, promising continuous operation for data communication and management. As an
added convenience, the V2101 computers have 3 DIs and 3 DOs for connecting digital
input/output devices. In addition, the SD and USB sockets provide the V2101 computers with the
reliability needed for industrial applications that require data buffering and storage expansion.
Pre-installed with Linux, Windows CE 6.0, or Windows Embedded Standard 2009, the V2101
Series provides programmers with a friendly environment for developing sophisticated, bug-free
application software at a lower cost.
Wide temperature models that operate reliably in temperatures ranging from -40 to 85°C are also
available. This is particularly convenient for industrial applications in extremely cold or hot
environments and helps establish a stable architecture for a variety of industrial tasks.
Package Checklist
The V2101 Series includes the following models:
V2101-T-CE:
x86 ready-to-run embedded computer with Intel Atom Z510PT, VGA, LVDS, audio, 2 LANs, 2
serial ports, 3 DIs, 3 DOs, 4 USB 2.0 ports, SD, WinCE 6.0, -40 to 85°C operating temperature.
V2101-T-XPE:
x86 ready-to-run embedded computer with Intel Atom Z510PT, VGA, LVDS, audio, 2 LANs, 2
serial ports, 3 DIs, 3 DOs, 4 USB 2.0 ports, SD, Win XPe SP3, -40 to 85°C operating temperature.
V2101-T-LX:
x86 ready-to-run embedded computer with Intel Atom Z510PT, VGA, LVDS, audio, 2 LANs, 2
serial ports, 3 DIs, 3 DOs, 4 USB 2.0 ports, SD, Linux 2.6, -40 to 85°C operating temperature.
Each model is shipped with the following items:
y V2101 Embedded Computer
y Terminal Block to Power Jack Converter
y DIN-Rail Mounting Kit
y Wall Mounting Kit
y Quick Installation Guide
y Document & Software CD or DVD
y Product Warranty Statement (printed)
NOTE: Please notify your sales representative if any of the above items are missing or
damaged.
1-2
V2101 HW User’s Manual Introduction
Product Features
V2101 series embedded computers have the following features:
y Intel Atom Z510PT 1.1 GHz processor, 400 MHz FSB
y DDR2 SODIMM socket, supporting DDR2 400 up to 2 GB
y Dual independent displays (VGA + LVDS)
y 2 Gigabit Ethernet ports
y 4 USB 2.0 ports for high speed peripherals
y 3 DIs and 3 DOs
y 2 RS-232/422/485 ports
y CompactFlash socket for storing OS
y 4 USB 2.0 hosts supporting system boot up
y Ready-to-run Embedded Linux, Windows CE 6.0, or Windows XPe platform
y -40 to 85°C wide operating temperature models for harsh environments
V2101 Hardware Specifications
Computer
CPU Intel Atom Z510PT 1.1 GHz processor
OS (pre-installed) Linux, Windows CE 6.0, or Windows XPe
DRAM
1 x 200-pin DDR2 SODIMM socket supporting DDR2 400 up to 2
GB (1 GB built in)
BIOS 8 Mbit Flash BIOS, ACPI function supported (XPE model only)
System Chipset Intel US15WPT
FSB 400 MHz
USB
4 USB 2.0 compliant hosts with type A connector, supports system
boot up
Storage
Built-in
2 GB CompactFlash to store OS (This CompactFlash card is used to
store OS; if you need additional storage capacity, we suggest you
use the SD card for storage expansion.)
Storage Expansion SD socket for SD card expansion
Display
Graphics Controller
Intel Graphics Media Accelerator 500 Graphics. A hardware
accelerator for 2D and 3D graphics
Video
The Poulsbo XL SCH supports full hardware acceleration of video
decode standards such as H.264, MPEG2, MPEG4, and WMV9.
SDVO Chrontel CH7317 CRT (1280 x 1024 @85Hz)
CRT Interface VGA output (DB15 female connector)
LVDS Interface Up to 24-bit single channel LVDS (1366 x 768 @85Hz)
Ethernet Interface
LAN 2 auto-sensing 10/100/1000 Mbps ports (RJ45)
Magnetic Isolation
1.5 K built-in
1-3
V2101 HW User’s Manual Introduction
Protection
Serial Interface
Serial Standards 2 RS-232/422/485 ports, software selectable (DB9 male)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity Non, Even, Odd, Space, Mark
Serial Signals
RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
Digital Input
Input Channels 3, source type
Input Voltage 0 to 30 VDC
Digital Input Levels for
Dry Contacts
Logic level 0: Close to GND
Logic level 1: Open
Digital Input Levels for
Wet Contacts
Logic level 0: +3V max.
Logic level 1: +10V to +30V (COM to DI)
Digital Output
Output Channels 3, sink type
Output Current Max. 200 mA per channel
On-state Voltage 24 VDC nominal, open collector to 30 V
LEDs
System Power, Storage
LAN 1 & 2 Act/Link 10/100/1000 Mode (on connectors)
Serial Tx, Rx
Switches and Buttons
Switch Power on/off x 1 (side)
Reset Button Reset button for system warm reboot x 1 (front side)
Physical Characteristics
Housing Aluminum
Weight 940 g
Dimensions Without ears: 150 x 48.7 x 125.2 mm (5.91 x 1.92 x 4.93 in)
With ears: 178 x 51.7 x 125.2 mm (7.01 x 2.04 x 4.93 in)
Mounting DIN-Rail, Wall, VESA (75 x 75 mm) compliance
Environmental Limits
Operating Temperature -40 to 85°C (-40 to 185°F)
Operating Humidity 5 to 95% non-condensing
Storage Temperature -40 to 85°C, 5 to 95% RH
Anti-vibration 2 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-shock 20 g @ IEC-68-2-27, half sine wave, 11 ms
1-4
V2101 HW User’s Manual Introduction
Power Requirements
Input Voltage 9-36 VDC (3-pin terminal block for V+, V-, SG)
Power Consumption
(without connecting the
LVDS panel)
With no load on 4 USB ports:
y 1.88 A @ 9 VDC, 17 W
y 583 mA @ 24 VDC 14 W
y 422 mA @ 36 VDC 15 W
With full load on 4 USB ports:
y 3 A @ 9 VDC 27 W
y 1 A @ 24 VDC 24 W
y 700 mA @ 36 VDC 25.2 W
Regulatory Approvals
EMC
CE (EN 55022 Class A, EN 61000-3-2 Class D, EN 61000-3-3, EN
55024), FCC (Part 15 Subpart B: 2008 CISPR 22 Class A, ANSI
C63.4)
Safety UL, LVD, CCC
Green Product RoHS, CRoHS, WEEE
Reliability
Automatic Reboot Trigger
Built-in WDT (watchdog timer) supporting 1-255 level time
interval system reset, software programmable
Warranty
Warranty Period 3 years
Details: See www.moxa.com/warranty
Note: The Hardware Specifications apply to the embedded computer unit itself, but not to the
accessories. In particular, the wide temperature specification does not apply to accessories such as
the power adaptor and cables.
Hardware Block Diagram
Intel Atom Z510
1.1 GHz CPU
Intel Poulsbo XL
Power
DDR2
SO-DIMM
CF Socket
SD Socket
Super I/O
Chrontel
CH7317
VGA
LVDS
BIOS
USB3
USB4
USB1
USB2
LAN
Controller
Gigabit
LAN1
Gigabit
LAN2
HD Audio
Controller
Line
In
Line
Out
Serial
Port 1
Serial
Port 2
Digital
Input
Digital
Output
RS-232/422/485 x 2 DI x 3 DO x 3
RTC
WDT
LAN
Controller
1-5
2
2
Chapter 2 Hardware Introduction
The V2101 series embedded computers are compact, well-designed, and built rugged enough for
industrial applications. LED indicators help you monitor performance and identify trouble spots,
multiple serial ports allow you to connect different devices for wireless operation, and the reliable
and stable hardware platform lets you devote your attention to developing your applications.
In this chapter, we cover the following topics:
Appearance
Dimensions
LED Indicators
Reset Button
Real Time Clock
V2101 HW User’s Manual Hardware Introduction
Appearance
V2101
Front View Side View
SD Socket USB 2.0 Host x 1
LED Indicators
(Power/Storage)
LED Indicators (Tx, Rx)
Reset Button
Rear View
VGA Output
10/100/1000 Mbps
Ethernet x 2
RS-232/422/485
Serial Port x 2
USB 2.0 Host x 3
DI x 3/DO x 3
Channels
Audio Output
Audio Input
LVDS Output
Power Input
Power Button
2-2
V2101 HW User’s Manual Hardware Introduction
Dimensions
V2101
150
125.248.7
51.7
70
178
164
LED Indicators
LED Name LED Color LED Function
Green
Power is on and functioning normally
Power
Off
Power is off or a power error exists
Yellow
SD card is detected
Storage
Off
SD card is not detected
Green
100 Mbps Ethernet mode
Yellow
1000 Mbps (Gigabit) Ethernet mode
LAN
Off
No activity or 10 Mbps Ethernet mode
Green
Serial ports P1-P2 transmitting data
Tx1, Tx2
(P1-P2)
Off
Serial ports P1-P2 not transmitting data
Yellow
Serial ports P1-P2 receiving data
Rx1, Rx2
(P1-P2)
Off
Serial ports P1-P2 not receiving data
2-3
V2101 HW User’s Manual Hardware Introduction
Reset Button
Press the Reset Button on the front panel of the V2101 to reboot the system automatically. The
Ready LED will blink on and off for the first 5 seconds, and then maintain a steady glow once the
system has rebooted.
The V2101 does not support a “Reset to Default” function.
Real Time Clock
The embedded computer’s real-time clock is powered by a lithium battery. We strongly
recommend that you NOT replace the lithium battery on your own. If the battery needs to be
changed, please contact the Moxa RMA service team.
ATTENTION
There is a risk of explosion if the wrong type of battery is used. To avoid this potential danger,
always be sure to use the correct type of battery. Contact the Moxa RMA service team if you
need to replace your battery.
Caution
There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions on the battery.
2-4
Loading...