Moxa Technologies V2101 User Manual
Embedded Computing Solutions
SD Socket USB 2.0 Host x 1
LED Indicators
(Power/Storage)
LED Indicators (Tx, Rx)
Reset Button
VGA Output
10/100/1000 Mbps
Ethernet x 2
RS-232/422/485
Serial Port x 2
USB 2.0 Host x 3
DI x 3/DO x 3
Channels
Audio Output
Audio Input
LVDS Output
Power Input
Power Button
V2101 Series
x86 ready-to-run embedded computer with Intel Atom Z510PT, VGA,
LVDS, audio, 2 LANs, 2 serial ports, 3 DIs, 3 DOs, 4 USB 2.0 ports, SD
Intel Atom Z510PT 1.1 GHz processor, 400/ 533 MHz FSB ›
DDR2 SODIMM socket, suppor ts DDR2 400/533 up to 2 GB ›
Dual Independent Displays (CRT + LVDS) ›
2 Gigabit Ethernet ports ›
4 USB 2.0 ports for high speed peripherals ›
3 DIs and 3 DOs ›
2 RS-232/422/485 ports ›
Built-in CompactFlash for storing OS ›
LED indicators for power, storage ›
Ready-to-run › Embedded Linux, WinCE 6.0, or Windows Embed-
ded Standard 2009 platform
-40 to 85°C wide operating temperature models available ›
Overview
The V2101 embedded computers are based on the Intel Atom Atom
Z510PT x86 processor, and feature 2 serial ports, dual Gigabit LAN
ports, 4 USB 2.0 hosts, and SD socket. The V2100 Series offers both
VGA and LVDS outputs, making it particularly well-suited for industrial
applications, such as SCADA and factory automation.
The V2101 computers’ 2 serial ports make them ideal for connecting a
wide range of serial devices, and the dual 10/100/1000 Mbps Ethernet
ports offer a reliable solution for network redundancy, promising
continuous operation for data communication and management. As
an added convenience, the V2101 computers have 3 DIs and 3 DOs
Appearance
Front View
Rear View
for connecting digital input/output devices. In addition, the SD and
USB sockets provide the V2101 computers with the reliability needed
for industrial applications that require data buffering and storage
expansion.
Pre-installed with Linux, Windows CE 6.0, or Windows Embedded
Standard 2009, the V2101 Series provides programmers with a
friendly environment for developing sophisticated, bug-free application
software at a lower cost.
All V2101 models support a wide operating temperature range of -40
to 85°C for harsh industrial environments.
Side View
1
www.moxa.com
info@moxa.com
Embedded Computing Solutions
Hardware Specifications
Computer
CPU: Intel Atom Z510PT 1.1 GHz processor
OS (pre-installed): Linux, Windows CE 6.0 or Windows Embedded
Standard 2009
System Chipset: Intel® US15WPT
BIOS: 4 Mbit Flash BIOS, PLCC type, ACPI function supported
FSB: 400/533 MHz
System Memory: 1 x 200-pin DDR2 SODIMM socket support DDR2
400/533 up to 2GB max, 1 GB built-in
USB: USB 2.0 compliant hosts x 4, type A connector, supports
system boot up
Storage
Built-in: 2 GB CompactFlash to store OS
Storage Expansion: SD socket for storage expansion
Other Peripherals
Audio: AC97 audio, with line-in/out interface
Display
Graphics Controller: Intel® Graphics Media Accelerator, 500
Graphics, for 2D and 3D graphics
Video: The Poulsbo XL SCH supports full hardware acceleration of
video decode standards such as H.264, MPEG2, MPEG4, and WMV9.
SDVO: Chrontel CH7317 CRT (1280 x 1024 @ 85 Hz)
CRT Interface: CRT Interface for VGA output (DB15 female
connector)
LVDS Interface: 18-bit or 24-bit single channel LVDS (1366 x 768 @
85 Hz)
Ethernet Interface
LAN: 2 auto-sensing 10/100/1000 Mbps ports (RJ45)
Serial Interface
Serial Standards: 2 RS-232/422/485 ports, software selectable (DB9
male)
ESD protection: 2 KV for all signals
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data
direction control) for RS-485
Baudrate: 50 bps to 115.2 Kbps
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 3, source type
Input Voltage: 0 to 30 VDC at 5 KHz
Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts:
• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (COM to DI)
Connector Type: DB9 female
Digital Output
Output Channels: 3, sink type
Output Current: Max. 200 mA per channel
Output Voltage:
• Logic 0: 0-0.55 V
• Logic 1: 2.5-3.3 V
On-state Voltage: 24 VDC nominal, open collector to 30 V
Connector Type: DB9 female
LEDs
System: Power, Storage
LAN: 100M/Link x 2, 1000M/Link x 2 (on connector)
Switches and Buttons
Power Switch: on/off (side)
Reset Button: For warm reboot (front side)
Physical Characteristics
Housing: Aluminum
Weight: 940 g
Dimensions:
Without ears: 150 x 49 x 126 mm (5.91 x 19.30 x 4.96 in)
With ears: 178 x 52 x 125 mm (7.01 x 2.05 x 49.21 in)
Mounting: DIN-Rail, wall, VESA
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Operating Humidity: 5 to 95% RH
Storage Temperature: -40 to 85°C (-40 to 185°F)
Anti-vibration: 2 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr
per axis
Anti-shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage: 9 to 36 VDC (3-pin terminal block for V+, V-, SG)
Power Consumption: (without connecting LVDS panel)
With no load on 4 USB ports:
• 1.88 A @ 9 VDC, 17 W
• 583 mA @ 24 VDC 14 W
• 422 mA @ 36 VDC 15 W
With full load on 4 USB ports:
• 3 A @ 9 VDC, 27 W
• 1 A @ 24 VDC, 24 W
• 700 mA @ 36 VDC, 25.2 W
Regulatory Approvals
EMC: CE (EN 55022 Class A, EN 61000-3-2 Class D, EN 61000-3-3,
EN 55024), FCC (Part 15 Subpart B, CISPR 22 Class A, ANSI C63.4)
Safety: UL/cUL (UL 60950-1, CSA C22.2 No. 60950-1-07), LVD (EN
60950-1), CCC
Green Product: RoHS, cRoHS, WEEE
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
supporting 1-255 level time interval system reset, software
programmable
Warranty
Warranty Period: 3 years
Details: See www.moxa.com/warranty
Note: The Hardware Specications apply to the embedded computer unit itself,
but not to accessories. In particular, the wide temperature specication does
not apply to accessories such as the power adaptor and cables.
2
www.moxa.com
info@moxa.com
Loading...