Moxa Technologies TN-5510A-2GLSX-ODC, TN-5510A-8POE-2GLSX-ODC, ToughNet TN-5510A-2GLSX-ODC, ToughNet TN-5510A-8POE-2GLSX-ODC Hardware Installation Manual

 2015 Moxa Inc. All rights reserved.

Reproduction without permission is prohibited.

P/N: 1802055100061

*1802055100061*

TN-5510A-2GLSX-ODC and

TN-5510A-8POE-2GLSX-ODC

Hardware Installation Guide

Moxa ToughNet Switch

Second Edition, March 2015

www.ipc2u.ru

www.moxa.pro

- 2 -

Overview

The ToughNet TN-5510A-2GLSX-ODC and TN-5510A-8POE-2GLSX-ODC
series M12 managed Ethernet switches are designed for industrial
applications in harsh environments. The TN series switches use M12
connectors to ensure tight, robust connections, and guarantee reliable
operation against environmental disturbances, such as vibration and
shock. The wide 24 to 110 VDC range with dual power inputs (non-PoE
series) increases the reliability of your communications.

The TN-5510A-2GLSX-ODC and TN-5510A-8PoE-2GLSX-ODC switches
provide up to 8 Fast Ethernet M12 ports, and 2 ports on the down side to
provide the Gigabit fiber interface with an embedded 2 km multimode
fiber transceiver. Moreover, the -40 to 75°C operating temperature and
IP54-rated waterproof enclosure allow deployment in harsh
environments. The TN-5510A Ethernet switch is compliant with the
essential sections of EN 50155 (railway applications), making it suitable
for a variety of industrial applications.

Package Checklist

The ToughNet TN-5510A-2GLSX-ODC and TN-5510A-8POE-2GLSX-ODC
switches are shipped with the following items. If any of these items are
missing or damaged, please contact your customer service
representative for assistance.

• 1 Moxa ToughNet switch

• M12 to DB9 console port cable

• 2 protective caps for console and relay output ports

• Panel mounting screws

• CD-ROM with user’s manual

• Hardware installation guide

• Warranty card

Features

Anti-Vibration Circular Connectors for Robust Links

• M12 D-coding 4-pin female connectors for Fast Ethernet

10/100BaseT(X) ports

• Fiber-optic ODC connectors with embedded 2 km Gigabit Ethernet

1000BaseLSX

• M12 A-coding 5-pin male connectors for console and relay output

• M23 6-pin male connector for power input

Dual Power Inputs

• Supports 24-110 VDC (16.8 to 137.5 VDC)

High Performance Network Switching Technology

• IEEE 1588 PTP (Precision Time Protocol) for precise time

synchronization of networks

• DHCP Option 82 for IP address assignment with different policies

• EtherNet/IP and Modbus/TCP industrial Ethernet protocols supported

• Turbo Ring and Turbo Chain (recovery time <20 ms @250 switches),

and STP/RSTP/MSTP for network redundancy

• IGMP Snooping and GMRP for filtering multicast traffic from industrial

Ethernet protocols

• Port-based VLAN, IEEE802.1Q VLAN, and GVRP protocol to ease

network planning

www.ipc2u.ru

www.moxa.pro

- 3 -

• QoS (IEEE 802.1p/1Q and ToS/DiffServ) allows real-time traffic

classification and prioritization

• 802.3ad, LACP for optimum bandwidth utilization

• TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance

network security

• SNMP v1/v2c/v3 for different levels of network management

• RMON for efficient network monitoring and proactive capability

• Bandwidth management prevents unpredictable network status

• Lock port allows access by only authorized MAC addresses

• Port mirroring for online debugging

• Automatic warning by exception through email, relay output

• Automatic recovery of connected device’s IP addresses

• Line-swap fast recovery

• LLDP for automatic topology discovery in network management

software

• Loop protection prevents network loops

• Configurable through Web browser, Telnet/serial console, CLI, and

Windows utility

Designed for Industrial-Specific Applications

• Two Gigabit fiber ports to meet high EMI immunity, long-distance,

and bandwidth requirements

• Essential compliance with EN 50155

• -40 to 75°C operating temperature range

• IP54, rugged high-strength case

• Panel mounting or DIN rail mounting installation capability

Recommended Optional Accessories

• CBL-M23(FF6P)Open-BK-100-IP67: 1-meter M23 to 6-pin power

cable with IP67-rated female 6-pin M23 connector

• CBL-M12D(MM4P)/RJ45-100 IP67: 1-meter M12-to-RJ45 Cat-5E UTP

Ethernet cable with IP67-rated male 4-pin M12 D-coded connector

• CBL-M12(FF5P)/OPEN-100 IP67: 1-meter M12-to-5-pin power cable

with IP67-rated female 5-pin M12 A-coded connector

• M12D-4P-IP68: Field-installable M12 D-coded screw-in connector,

male 4-pin, IP68-rated

• M12A-5P-IP68: Field-installable M12 A-coded screw-in connector,

female 5-pin, IP68-rated

• CAP-M12F-M: Metal cap for M12 female connector

• DK-DC50131: DIN rail mounting kit, 50 x 131 mm

www.ipc2u.ru

www.moxa.pro

- 4 -

TN-5510A-2GLSX-ODC Panel Layouts

1. Screw holes for panel mounting kit

2. Console port

3. Grounding screw

4. Relay output port

5. Power input voltage range indicator

6. Power input port (male 6-pin shielded M23 connector)

7. PWR1 LED: for power input 1

www.ipc2u.ru

www.moxa.pro

- 5 -

8. PWR2 LED: for power input 2

9. FAULT LED

10. MSTR/HEAD LED: for ring master or chain head

11. CPLR/TAIL LED: for ring coupler or chain tail

12. TP port’s 10/100 Mbps LED

13. 10/100BaseT(X) port (female 4-pin shielded M12 connector with D

coding)

14. Waterproof vent

15. Product label

16. 12 screw holes for DIN rail mounting kit

17. E2 LED: Down-side E2 Gigabit port’s 1000 Mbps LED

18. E1 LED: Down-side E1 Gigabit port’s 1000 Mbps LED

19. Gigabit fiber port E1 (corresponding to port 9 in the TN-5510A User’s

Manual)

20. Gigabit fiber port E2 (corresponding to port 10 in the TN-5510A

User’s Manual)

ATTENTION

Please DO NOT open or remove vent 15. The warranty will be
invalid if the seal is removed.
All exposed connectors, including 3, 5, 7, and 14, should be
tightly covered by protective caps when they are not in use to
ensure IP54 protection.

www.ipc2u.ru

www.moxa.pro

- 6 -

Mounting Dimensions (unit = mm)

TN-5510A-2GLSX-ODC Series

www.ipc2u.ru

www.moxa.pro