Moxa Technologies S9450I Quick Installation Manual

P/N: 1802094500010

*1802094500010*

NPort S9450I Series

Quick Installation Guide

Edition 1.0, February 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:
Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):
Toll

-free: 800-820-5036

Tel:

[phone]

Fax:

[phone]

Moxa Europe:
Tel:

[phone]

Fax:

[phone]

Moxa Asia-Pacific:
Tel:

[phone]

Fax:

[phone]

Moxa India:
Tel:

[phone]

Fax:

[phone]



2017 Moxa Inc. All rights reserved.

- 2 -

Overview

The NPort S9450I series combines a substation-grade 4-port
RS-232/422/485 serial ports device server with a full-function managed
Ethernet switch by integrating a combination of fiber and copper Ethernet
ports, allowing you to easily install, manage, and maintain the products
and serial devices.

Package Checklist

Before installing the NPort S9450I, verify that the package contains the
following items:

• 1 NPort S9450I combo switch/serial device server

• 1 CN20070 connection CBL: RJ45/10P/F9, 150 cm

• 1 DK/DC 50x131 mm DIN-rail kit

• Documentation and software CD

• Quick installation guide

• Warranty card

Optional Accessories (must be ordered separately)

• Wall-mount kit WK-51-01

Please notify your sales representative if any of the above items are
missing or damaged.

Hardware Introduction

The NPort S9450I integrates five Ethernet ports and four male DB9

ports for the RS-232/422/485 serial port.

The NPort S9450I-2S/NPort S9450I-2M integrates two fiber ports,
three Ethernet ports, and four male DB9 ports for the RS-232/422/485
serial port.

Reset Button—Hold the Reset button for five seconds to load the factory
default settings: Use a pointed object, such as a straightened paper clip
or toothpick, to press the reset button. This will cause the Ready LED to
blink on and off. The factory defaults will be loaded once the Ready LED
stops blinking (after about five seconds). At this point, you should release
the reset button.