Moxa Technologies IMC-P101-S-ST, IMC-P101-M-SC, IMC-P101-M-SC-T, IMC-P101-M-ST-T, IMC-P101-S-SC-T Hardware Installation Manual

Moxa PoE Media Converter

IMC-P101

Hardware Installation Guide

First Edition, November 2009

© 2009 Moxa Inc. All rights reserved.

Reproduction without permission is prohibited.

Fl.4, No.135, Lane 235, Pao-Chiao Rd. Shing Tien City, Taipei, Taiwan,

R.O.C.

TEL: [phone]

P/N: 1802001015010

- 2 -

Overview

The IMC-P101 series is an Ethernet to fiber optic media converter. It provides
Ethernet media conversion from 10/100 BaseT(X) to 100 BaseFX(SC/ST
connectors). These media converters are classified as power source equipment
(PSE), and when used in this way, the IMC-P101 series provides up to 15.4
watts to powered devices (PD). The IMC-P101 series can be used to power
IEEE 802.3af compliant powered devices (PD), eliminating the need for
additional wiring, and supports IEEE 802.3/802.3u/802.3x with 10/100M,
full/half-duplex, and MDI/MDI-X auto-sensing to provide a total solution for
your industrial Ethernet network.

The IMC-P101 Series includes the following models:

y IMC-P101-M-SC: PoE Industrial 10/100BaseT(X) to 100BaseFX media

converter, multi-mode port with SC connector, 0 to 60°C operating
temperature.

y IMC-P101-M-ST: PoE Industrial 10/100BaseT(X) to 100BaseFX media

converter, multi-mode port with ST connector, 0 to 60°C operating
temperature.

y IMC-P101-S-SC: PoE Industrial 10/100BaseT(X) to 100BaseFX media

converter, single-mode port with SC connector, 0 to 60°C operating
temperature.

y IMC-P101-S-ST: PoE Industrial 10/100BaseT(X) to 100BaseFX media

converter, single-mode port with ST connector, 0 to 60°C operating
temperature.

y IMC-P101-M-SC-T: PoE Industrial 10/100BaseT(X) to 100BaseFX media

converter, multi-mode port with SC connector, -40 to 75°C operating
temperature.

y IMC-P101-M-ST-T: PoE Industrial 10/100BaseT(X) to 100BaseFX media

converter, multi-mode port with ST connector, -40 to 75°C operating
temperature.

y IMC-P101-S-SC-T: PoE Industrial 10/100BaseT(X) to 100BaseFX media

converter, single-mode port with SC connector, -40 to 75°C operating
temperature.

y IMC-P101-S-ST-T: PoE Industrial 10/100BaseT(X) to 100BaseFX media

converter, single-mode port with ST connector, -40 to 75°C operating
temperature.

NOTE

Throughout this Hardware Installation Guide, we often use
IMC as an abbreviation for Moxa Industrial Media
Converter:

IMC = Moxa Industrial Media Converter

- 3 -

Package Checklist

Moxa PoE Media Converter is shipped with the following items. If any of these
items is missing or damaged, please contact your customer service
representative for assistance.

y IMC-P101 series media converter.
y Hardware Installation Guide (printed).
y Warranty Card.

Features

y 10/100BaseT(X) Auto-Negotiation and Auto-MDI/MDI-X.
y IEEE 802.3af compliant PoE.
y Power failure by relay output.
y Provides up to 15.4W of power to powered devices (PD).
y Support Store-and-Forward mode and Pass Through mode.
y -40 to 75°C operating temperature range (T models).

y Redundant dual VDC power inputs.

- 4 -

Panel Layout of the IMC-P101 Series

Top Panel View

Rear Panel View

Front Panel View (IMC-P101-M-ST)

1

2

4

3

14

15

14

2
5

7

8

9

6

12

11

10
13

1. Grounding screw

2. Terminal block for power
input PWR1/PWR2

3. Heat dissipation vents and
relay output

4. DIP switch

5. Power input PWR1 LED

6. Power input PWR2 LED

7. Fiber Link/Active LED

8. 100BaseFX (ST/SC
connector) Port

9. PSE Indicator LED

10. 10/100BaseT(X)

11. TP port 10 Mbps LED

12. TP port 100 Mbps LED

13. Model Name

14. Screw hole for wall
mounting kit

15. DIN-Rail mounting kit

- 5 -

Mounting Dimensions

135.1 mm (5.32 in)

144.45 mm (5.69 in)

101.4 mm (3.99 in)

110.2 mm (4.34 in)

51.65 mm
(2.03 in)

34 mm

(1.34 in)

51.6 mm
(2.03 in)

30.5 mm

(1.2 in)

54 mm (2.13 in)

67 mm (2.64 in)

39.84 mm

(1.57 in)

40.8 mm

(1.61 in)

12.06 mm
(0.47 in)

42.4 mm
(1.67 in)

40 mm

(1.57 in)

Front ViewSide View

Rear View Panel Mounting Kit (Optional)

IMC-P101-M-SC