Moxa Technologies IEX-408E-2VDSL2-HV, IEX-408E-2VDSL2-LV Quick Installation Manual

P/N: 1802004082010

*1802004082010*

IEX-408E-2VDSL2 Series

Quick Installation Guide

Moxa Managed VDSL2 Ethernet Extender Switch

Edition 1.0, April 2016

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:
Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):
Toll

-free: 800-820-5036

Tel:

[phone]

Fax:

[phone]

Moxa Europe:
Tel:

[phone]

Fax:

[phone]

Moxa Asia-Pacific:
Tel:

[phone]

Fax:

[phone]

Moxa India:
Tel:

[phone]

Fax:

[phone]



2016 Moxa Inc. All rights reserved.

www.ipc2u.ru

www.moxa.pro

Overview

The IEX-408E-2VDSL2 is an industrial managed Ethernet extender switch
for establishing long distance Ethernet transmissions over twisted-pair
copper wiring. IEX-408E-2VDSL2 units can easily be linked in series to
form a long distance multi-drop configuration, with one
IEX-408E-2VDSL2 unit located at each drop-point. Adjacent drop-points
can be separated theoretically by up to 3 km, with a transmission speed of
1 Mbps achieved using a VDSL2 connection (with a connection distance of
300 m, a transmission speed of 100Mbps can be theoretically achieved).

Each IEX-408E-2VDSL2 unit provides six 10/100BaseT(X) and two DSL
ports, giving users an incredible amount of flexibility for linking together
a wide variety of devices separated by vast distances. With its compact
DIN-rail design, the IEX-408E-2VDSL2 series is perfect for use in harsh
operating environments with limited installation space.

Redundancy is provided by Turbo Ring, Turbo Chain, RSTP/STP, and
MSTP, and a state-of-the-art controllable bypass solution on the DSL
ports increases the system reliability and availability of your network.

To simplify configuration, the IEX-408E-2VDSL2 uses CO/CPE automatic
negotiation (the factory default setting). The device will automatically
adjust CO/CPE status to each DSL connection pair of IEX devices to
enable a touch-free of settings.

www.ipc2u.ru

www.moxa.pro

Package List

The Moxa IEX-408E-2VDSL2 is shipped with the following items. If any of
these items are missing or damaged, please contact your customer
service representative for assistance.

• 1 IEX-408E-2VDSL2 Extender Switch

• USB Cable: CBL-USBA/B-100

• Protective caps for unused ports

• Documentation and software CD

• Quick installation guide (printed)

• Warranty card

Feature Highlights

• 6 10/100BaseT(X) Fast Ethernet ports and 2 DSL (VDSL2 technology)
ports for long distance copper connections (up to 100Mbps @ ~300m
and up to 3km @ ~1Mbps over twisted-pair copper wires)

• Automatic CO/CPE negotiation reduces configuration time

• Turbo Ring / Turbo Chain on both Fast Ethernet and DSL ports for fast
recovery

• Controllable bypass mode on DSL ports gives higher availability in a
daisy chain topology

• Port Trunking on Ethernet and DSL ports for optimum bandwidth
utilization

• RADIUS, TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to
enhance network security

• Flexible deployment with 2-pin or RJ11/45 connector on DSL ports

• Easy network management by web browser, Telnet/serial console,
Windows utility, ABC-02-USB, and MXview

• Universal power supply options
 Universal high-voltage (HV) model (IEX-408E-2VDSL2-HV):

110/220 VDC/VAC (88 to 300 VDC, 85 to 264 VAC)

 Redundant dual inputs low-voltage (LV) model

(IEX-408E-2VDSL2-LV): 12/24/48 VDC (9.6 to 60 VDC)

www.ipc2u.ru

www.moxa.pro

IEX-408E-2VDSL2 Panel Layout

Front Panel:

1. USB storage port (type A
connector)

2. 1 to 6: 10/100BaseT(X) port

3. 1 to 6 port status LED

• Upper LED: 100 Mbps

• Lower LED: 10 Mbps

4. System status LED:

• STATE LED indicator

• PWR1 LED indicator

• PWR2 LED indicator

• DSL BYPASS LED indicator

• FAULT LED indicator

• MSTR/HEAD LED indicator

• CPLR/TAIL LED indicator

5. D1 to D2: DSL port

6. DSL port (RJ-45/RJ-11
connector)

7. DSL port (Detachable 2-pin
terminal block)

8. D1 to D2 DSL port st

atus LED:

• CO/CPE LED indicator

• LNK/ACT LED indicator

9. 3-pin-DIP-switch for
controlling DSL Bypass mode

10.

Door screw

11.

Model name

Top Panel

:

1. RESET button

2. 4-pin terminal receptor for
relay output and digital input

3. USB console port (type B
connector)

4. 4-pin-DIP-switch for Turbo
Ring, Ring Master, and Ring
Coupler

5. Grounding screw (chassis
ground)

6. 5-pin terminal receptor for
power input(s)

• Universal high-voltage

(HV) model
(IEX-408E-2VDSL2-HV):
110/220 VDC/VAC (PWR

1)

• Redundant dual inputs

low-voltage (LV) model
(IEX-408E-2VDSL2-LV):
12/24/48 VDC (PWR 1)
and 12/24/48 VDC (PWR

2)

www.ipc2u.ru

www.moxa.pro

Rear Panel:

1.

Screw holes for wall mounting

kit

2. DIN-rail mounting kit

Mounting Dimensions - unit = mm (inches)

www.ipc2u.ru

www.moxa.pro

DIN-Rail Mounting

The metal DIN-rail mounting kit is fixed to the back panel of the
IEX-408E-2VDSL2. Mount the IEX-408E-2VDSL2 on the corrosion-free
mounting rail that meets the EN 60715 standard.

Installation

STEP 1—Insert the upper lip of

the DIN

-rail kit into the

mounting rail.

STEP 2

—Press the

IEX

-408E-2VDSL2 towards the

mounting rail until it snaps into
place.

Removal

STEP 1—Pull down the latch on

the DIN

-rail kit with a

screwdriver.

STEP 2 & 3

—Slightly pull the

IEX

-408E-2VDSL2 forward and

lift up to remove it from the
mounting rail.

Wall-Mounting (optional)

For some applications, you will find it convenient to mount the Moxa
IEX-408E-2VDSL2 on the wall, as shown in the following figures in this
section. Please follow below illustrations to install.

STEP 1—Remove the DIN rail attachment plate from the rear panel of the
IEX-408E-2VDSL2, and then attach the wall mount plates with M3 screws,
as shown in the figure below.

www.ipc2u.ru

www.moxa.pro