Moxa Technologies ICS-G7526A, ICS-G7528A, ICS-G7828A, ICS-G7826A Quick Installation Manual

P/N: 1802075260022

*1802075260022*

ICS-G7526A/G7528A/

G7826A/ G7828A Series

Quick Installation Guide

Edition 2.1, August 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:
Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):
Toll

-free: 800-820-5036

Tel:

[phone]

Fax:

[phone]

Moxa Europe

:

Tel:

[phone]

Fax:

[phone]

Moxa Asia

-Pacific:

Tel:

[phone]

Fax:

[phone]

Moxa India:
Tel:

[phone]

Fax:

[phone]



2017 Moxa Inc. All rights reserved.

- 2 -

Package Checklist

The Moxa ICS-G7526A/G7528A/G7826A/G7828A Series industrial
rackmount switches are shipped with the following items. If any of these
items are missing or damaged, please contact your customer service
representative for assistance.

• ICS-G7526A/G7528A/G7826A/G7828A switch

• USB cable (Type A male to Type B male)

• Power cord

• 4 protective caps for unused ports

• 2 rackmount ears

• Documentation and software CD

• Quick installation guide (printed)

• Warranty card

Panel Layouts

ICS-G7526A/G7826A

ICS-G7528A/G7828A

1. Model Name

2. System status LEDs

3. 10/100/1000 BaseT(X) port status LEDs

4. 100/1000 Base SFP port status LEDs

- 3 -

5. 10/100/1000 BaseT(X) port

6. 100/1000 Base SFP slot

7. 10/100/1000 BaseT(X) or 100/1000 Base SFP slot combo ports

8. 10 Gigabit Ethernet SFP+ slot

9. 10 Gigabit Ethernet SFP+ port status LEDs

10. Reset button

11. USB serial console port

12. USB storage port (ABC-02-USB)

13. Terminal block for Relay Output, Digital Input

14. AC power sockets for power inputs

15. Grounding screw

Dimensions (unit = mm)

Grounding the Industrial Rackmount Switch

Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from the
ground screw to the grounding surface prior to connecting devices.

Connecting the Power Inputs

The ICS-G7526A/G7528A/G7826A/G7828A switches support dual
redundant power supplies: Power Supply 1 (PWR1) and Power Supply 2
(PWR2). The connections for PWR1 and PWR2 are located on the rear side
(shown below). Be sure to use a standard power cord with an IEC C13
connector, which is compatible with the AC power inlet.