Moxa Technologies IA260 User Manual

2
www.moxa.com
info@moxa.com
4
Moxa Embedded Computers
DIN-Rail
LED Indicators
10/100 Mbps Ethernet x 2
R T
4
CompactFlash Socket
Power , Ready, S torage
Serial, Tx/Rx
LED Indicators
VGA Output
RS-232/422/485 Serial Port x 4
USB 2.0 Host x 2
Serial, Tx/Rx
LED Indicators
DI x 8
DO x 8
Power Input
Reset
IA260 Series
RISC-based computers with 4 serial ports, dual LANs, VGA, DIO, CompactFlash, USB
The certification logos shown here apply to some or all of the products in this section. For details, see “Regulatory Approvals” under “Specifications” below.
Overview
The IA260 embedded computers come with 4 RS-232/422/485 serial ports, dual Ethernet ports, 8 digital input channels, 8 digital output channels, a VGA output, 2 USB hosts, and a CompactFlash socket. The computers are housed in a compact, IP40 protected, industrial­strength aluminum case.
The IA260 computers use the Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM give you enough memory to run your application software directly on the IA260.
The patented “H-Type” heat dissipation design makes the IA260 an ideal computing unit for applications in extremely hot field sites, since it can directly transmit heat from inside the housing to the air.
Appearance
With its built-in VGA output interface, the IA260 computers are suitable for use with SCADA systems in industrial applications, such as factory automation, production line process monitoring, and mining automation, that require VGA and HMI features.
The IA260 computers support RS-232/422/485, digital I/O, and have dual LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. In addition to the standard model, a wide temperature (-40 to 75°C) model is available for use in harsh industrial automation environments.
The IA260 runs WinCE 6.0 (pre-installed), providing a friendly environment for developing sophisticated application software. The great software support that Moxa provides makes the programmer’s job easier and helps programmers develop bug-free code quickly and at a lower cost.
Front View Top View
3
info@moxa.com
www.moxa.com
4
Ready-to-run Platform Provider for Industrial Embedded Computing
Hardware Specifications
Cirrus Logic EP9315 32-bit ARM9 200 MHz
128MB RAM
32MB Flash
Power Circuit
RTC
Watchdog
LAN
MAC
PHY
Ethernet x 2
LAN
CF Function
RS-232/422/485 x 4
LAN Controller
PHY
VGA
USB 2.0 Host x 2
RS-232
UART
Console Port
DIx8 DOx8
MOXA UART
ASIC
MOXA UART
ASIC
MOXA
UART
ASIC
MOXA UART
ASIC
Serial Port 1
Serial Port 2
Serial Port 3
Serial Port 4
Computer
CPU: Cirrus EP9315 ARM9 CPU, 200 MHz OS (pre-installed): Windows CE 6.0 DRAM: 128 MB onboard (optional 256 MB) Flash: 32 MB onboard (optional 64 MB) Storage Expansion: CompactFlash socket USB: USB hosts x 2, compliant with USB 2.0 (OHCI) type A
connectors
DI/DO: DI x 8, DO x 8, TTL Reset Button: Supports “Reset to Factory Default”
LAN Interface
Ethernet: Auto-sensing 10/100 Mbps x 2, RJ45 connectors Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Number of Ports: 4 Serial Standards: RS-232/422/485, software-selectable Connectors: DB9 male Console/Debugging Port: RS-232 (TxD, RxD, GND), 4-pin header
output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, XON/XOFF, ADDC™ (automatic data
direction control) for RS-485 Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates;
see user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 8, source type Input Voltage: 0 to 30 VDC at 5 KHz Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts:
• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (COM to DI)
Connector Type: 10-pin screw terminal block (8 points, COM, GND) Optical Isolation Protection: 3 KV
Digital Output
Output Channels: 8, sink type Output Current: Max. 200 mA per channel On-state Voltage: 24 VDC nominal, open collector to 30 V Connector Type: 9-pin screw terminal block Optical Isolation Protection: 3 KV
Display
Graphics Controller: EP9315 internal graphics accelerator engine
with TTL graphical signal support
Display Memory: Dynamic video memory (shares system memory) Graphics Resolution: 1024 x 768, 8 bits Display Interface: CRT interface for VGA output, DB15 female
connector
LEDs
System: Power x 1, Ready x 1, Storage x 1 LAN: 10M/Link x 2, 100M/Link x 2 (on connector) Serial: TxD x 4, RxD x 4
Physical Characteristics
Housing: Aluminum, industrial vertical form factor Weight: 1 kg Dimensions: 52 x 112.6 x 162 mm (2.05 x 4.43 x 6.38 in) Mounting: DIN-Rail, wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Operating Humidity: 5 to 95% RH Storage Temperature:
Standard Models: -20 to 80°C (-4 to 176°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Power Requirements
Input Voltage: Redundant power input design, 12 to 48 VDC (3-pin
terminal block) Power Consumption:
480 mA @ 12 VDC (with no load on USB ports) 900 mA @ 12 VDC (with load on 2 USB ports)
Regulatory Approvals
EMC: CE (EN55022 Class A, EN61000-3-2 Class A, EN61000-3-3,
EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A), CCC (GB9254, GB 17625.1)
Safety: UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), LVD (EN60950-1), CCC (GB4943)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty
Warranty Period: 5 years Details: See www.moxa.com/warranty
H/W Block Diagram
Loading...
+ 1 hidden pages