Moxa Technologies EtherDevice EDS-G205A-4PoE Hardware Installation Manual

 2011 Moxa Inc. All rights reserved.

P/N: 1802002051020

EDS-G205A-4PoE

Hardware Installation Guide

Moxa EtherDevice Switch

First Edition, October 2011

- 2 -

Overview

The EDS-G205A-4PoE series industrial Ethernet switches are rugged
entry-level industrial 5-port gigabit PoE switches that support IEEE 802.3,
IEEE 802.3u, IEEE 802.3x with 10/100/1000M, full/half-duplex,
MDI/MDIX auto-sensing, and IEEE 802.3af/IEEE 802.3at PoE standards.

The EDS-G205A-4PoE series provides 24/48 VDC redundant power inputs
that can be connected simultaneously to a live DC power source. The
switches are available with a standard operating temperature range from
0 to 60°C, or with a wide operating temperature range from -40 to 75°C,
and their IP30 metal housing makes them rugged enough for any harsh
industrial environment.

To provide greater versatility for use with applications from different
industries, the EDS-G205A-4PoE switches also allow users to enable or
disable broadcast storm protection with DIP switches on the outer panel.
The EDS-G205A-4PoE switches can be easily installed on a DIN-Rail or in
distribution boxes. The DIN-Rail mounting capability and IP30 metal
housing with LED indicators make the plug-and-play EDS-G205A-4PoE
switches reliable and easy to use.

NOTE

Throughout this Hardware Installation Guide, we use EDS as an
abbr

eviation for Moxa EtherDevice Switch:

EDS = Moxa EtherDevice Switch

Package Checklist

Your EDS is shipped with the following items. If any of these items is
missing or damaged, please contact your customer service
representative for assistance.

• Moxa EtherDevice™ Switch

• Hardware Installation Guide

• Moxa Product Warranty booklet

Features

High-watt Power-over-Ethernet

• Up to 30 watts output per PoE port (IEEE 802.3at)

• Short circuit and over current protection

• Auto detection for IEEE 802.3af and IEEE 802.3at

High Performance Network Switching Technology

• 10/100Base-T(X), 1000Base-T and 1000Base-X (SFP)

• 10/100/1000M, Full/Half-Duplex, MDI/MDIX auto-sensing

• IEEE 802.3/802.3u/802.3x

• Store and Forward switching process type,8K MAC address entries

• 9.6K jumbo frame

Rugged Design

• Redundant dual 24/48 VDC power inputs

• Operating temperature range from 0 to 60°C, or extended operating

temperature of -40 to 75°C for (T) models.

• IP30 metal housing

• DIN-rail or panel mounting ability

- 3 -

EDS-G205A-4PoE (Standard) Panel Layouts

1. Terminal blocks for
P1/P2 power inputs

2. Power input P1 LED

3. Power input P2 LED

4. PoE status LED

5. 10/100/1000Base-T(X)
PoE ports (port 2/3/4/5)

6. TP port speed LED

7. 10/100/1000Base-T(X)
port (port 1)

8. 10/100/1000Base-X SFP
slot

9. Model name

10. Grounding screw

11. P1 power input terminal
block

12. P2 power input terminal
block

13. DIP switches

14. Screw holes for panel
mounting kit

15. DIN-Rail mounting kit

- 4 -

Mounting Dimensions (unit = mm)

DIN-Rail Mounting

The aluminum DIN-Rail attachment plate should already be fixed to the
back panel of the EDS when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate, make sure the stiff metal spring
is situated towards the top, as shown in the figures below.

STEP 1:

Insert the top of the DIN-Rail into
the slot just below the stiff metal
spring.

STEP 2:

The DIN-Rail attachment unit will
snap into place as shown below.