Moxa Technologies EDS-600, EtherDevice EDS-608, EtherDevice EDS-611, EtherDevice EDS-616, EtherDevice EDS-619 Hardware Installation Manual
...
Moxa EtherDevice™ Switch
EDS-600 Series
Hardware Installation Guide
First Edition, Augus t 2009
© 2009 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.
Fl.4, No.135, Lane 235, Pao-Chiao Rd. Shing Tien City, Taipei, Taiwan,
R.O.C.
TEL: +886-2-8919-1230
P/N: 1802006000010
- 2 -
Package Checklist
The Moxa EDS-600 series is shipped with the following items. If any of these
items is missing or damaged, please contact your customer service
representative for assistance.
y 1 EDS-600 EtherDevice Switch
y Hardware Installation Guide
y CD-ROM with User’s Manual and Windows utility
y Moxa product warranty statement
y RJ45 to DB9 console port cable
y Protective caps for unused ports
y Wall Mounting Kit (optional—must be ordered separately)
y Anti-Vibration Wiring Kit (optional, must be ordered separately)
Features
Advanced Industrial Networking Capabilities
y IPv6 ready (certified by the IPv6 Logo Committee).
y IEEE 1588 PTP (Precision Time Protocol) for precise time
synchronization of networks.
y Supports LLDP (Link Layer Discovery Protocol)
y DHCP Option 82 for IP address assignment with different policies.
y Supports Modbus/TCP industrial Ethernet protocol.
y Turbo Ring and Turbo Chain (< 20 ms recovery time at full load) and
STP/RSTP (IEEE 802.1w/D).
y IGMP snooping and GMRP for filtering multicast traffic.
y Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
planning.
y QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism.
y Port Trunking for optimal bandwidth utilization.
y IEEE 802.1X, HTTPS, and SSH to enhance network security.
y SNMPv1/v2c/v3 for different levels of network management.
y RMON for efficient network monitoring and proactive capability.
y Bandwidth management prevents unpredictable network status.
y Lock port function for blocking unauthorized access based on MAC
address.
y Port mirroring allows for online debugging.
y Automatic warning by exception through e-mail and relay output.
y Digital inputs to integrate sensors and alarms with IP networks.
- 3 -
Panel Views of the EDS-608
1
2
7
4
6
5
10
3
9
8
8
FRONT VIEW
REAR VIEW
Front Panel:
1. System Status LEDs
2. Fast Ethernet Interface Module port LEDs
3. Fast Ethernet Interface Module
4. Terminal block for 2 power inputs, 1 DI/DO, and 1 relay output
5. Grounding screw
6. DIP switches for Ring Master, Ring Coupler, and Turbo Ring
7. RS-232 Console port
8. Screw to attach Fast Ethernet Interface Module
Rear Panel:
9. DIN-Rail Attachment Plate
10. Screw holes for wall mounting kit
- 4 -
Panel Views of the EDS-611
1
10
2
7
4
6
5
12
3
11
9
8
9
FRONT VIEW
REAR VIEW
Front Panel:
1. System Status LEDs
2. Fast Ethernet Interface Module port LEDs
3. Fast Ethernet Interface Module
4. Terminal block for 2 power inputs, 1 DI/DO, and 1 Relay output
5. Grounding screw
6. DIP switches for Ring Master, Ring Coupler, and Turbo Ring
7. RS-232 Console port
8. G1 to G3: 10/100/1000 BaseT(X) or 100/1000Base SFP slot combo
ports
9. Screw to attach Fast Ethernet Interface Module
10. Gigabit Ethernet LEDs
Rear Panel:
11. DIN-Rail Attachment Plate
12. Screw holes for wall mounting kit
- 5 -
Panel Views of the EDS-616
1
2
7
4
6
5
10
3
9
8
8
FRONT VIEW
REAR VIEW
Front Panel:
1. System Status LEDs
2. Fast Ethernet Interface Module port LEDs
3. Fast Ethernet Interface Module
4. Terminal block for 2 power inputs, 1 DI/DO, and 1 relay output
5. Grounding screw
6. DIP switches for Ring Master, Ring Coupler, and Turbo Ring
7. RS-232 Console port
8. Screw to attach Fast Ethernet Interface Module
Rear Panel:
9. DIN-Rail Attachment Plate
10. Screw holes for wall mounting kit
- 6 -
Panel Views of the EDS-619
1
2
7
4
6
5
12
10
3
11
9
9
8
FRONT VIEW
REAR VIEW
Front Panel:
1. System Status LEDs
2. Fast Ethernet Interface Module port LEDs
3. Fast Ethernet Interface Module
4. Terminal block for 2 power inputs, 1 DI/DO, and 1 relay output
5. Grounding screw
6. DIP switches for Ring Master, Ring Coupler, and Turbo Ring
7. RS-232 Console port
8. G1 to G3: 10/100/1000 BaseT(X) or 100/1000Base SFP slot combo
ports
9. Screw to attach Fast Ethernet Interface Module
10. Gigabit Ethernet LEDs
Rear Panel:
11. DIN-Rail Attachment Plate
12. Screw holes for wall mounting kit
Loading...