Moxa Technologies EDS-405, EDS-405-MM-SC, EDS-405-SS-SC, EDS-405-MM-ST User Manual

Moxa EtherDevice™ Switch

EDS-405 User’s Manual

Fifth Edition, June 2008

© 2008 Moxa Inc., all rights reserved.

Reproduction without permi ssi on is pr ohibited.

Moxa EtherDeviceTM Switch

EDS-405 User’s Manual

The software described in this manual is furnished under a license agreement and

may be used only in accordance with the terms of that agreement.

Copyright Notice

Copyright © 2008 Moxa Inc.

All rights reserved.

Reproduction without permi ssi on is pr ohibited.

Trademarks

MOXA is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective

manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not
represent a commitment on the part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either
expressed or implied, including, but not lim i te d to, its part icular purpose. Moxa
reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable.
However, Moxa assumes no responsibility for its use, or for any infringements
on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors.
Changes are periodically made to the information herein to correct such errors,
and these changes are incorporated into new editions of the publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas
Toll-free: 1-888-669-2872
Tel: [phone]
Fax: [phone]

Moxa Europe

Tel: [phone]

Fax: [phone]

:

:

Moxa China (Shanghai office)

Toll-free: 800-820-5036
Tel: [phone]
Fax: [phone]

Moxa Asia-Pacific
Tel: [phone]
Fax: [phone]

:

:

Table of Contents

Chapter 1 Introduction......................................................1-1

Overview...........................................................................1-2

Package Checklist...........................................................1-3

Product Features.............................................................1-3

Panel Layout of EDS-405............................................... 1-4

Panel Layout of EDS-405-MM/SS-SC..........................1-5

Panel Layout of EDS-405-MM-ST ................................1-6

Chapter 2 Installing EDS-405...........................................2-1

Mounting Dimensions.....................................................2-2

DIN-Rail Mounting...........................................................2-3

Wall Mounting (Optional)................................................2-4

Chapter 3 Wiring EDS-405................................................3-1

Wiring Requirements.......................................................3-2

Grounding EDS-405........................................................3-4

Wiring the Alarm Contact................................................3-4

Wiring the Redundant Power Inputs.............................3-5

Communication Connections.........................................3-6

10/100BaseT(X) Ethernet Port Connection......3-6

100BaseFX Fiber Port Connection....................3-8

Chapter 4 How to Use EDS-405 .......................................4-1

Supported Ethernet Network Topologies......................4-2

Redundant Ring Topology...................................4-2

Star-Wired Topology.............................................4-3

Moxa Turbo Ring Setup..................................................4-4

Front Panel LED Indicators............................................4-7

Dip Switch Settings .........................................................4-8

Upgrading the Firmware.................................................4-9

Basic Switching Function............................................. 4-11

Auto MDI/MDI-X Connection............................ 4-11

Fiber Ports........................................................... 4-11

Dual Speed Functionality and Switching.........4-12

Switching, Filtering, and Forwarding...............4-12

Switching and Address Learning......................4-13

Auto-Negotiation and Speed Sensing.............4-13

Appendix A Product Specifications................................... A-1

1

1

Chapter 1Introduction

Welcome to Moxa EDS-405 Series, the new generation of EtherDevice™ Switch
that comes with “Moxa Turbo Ring,” developed by Moxa for industrial Ethernet
switches. With this plug-n-play ring redundancy solution, your industrial
automation and control applications can operate non-stop.

The following topics are covered in this chapter:

 Overview
 Package Checklist
 Product Features
 Panel Layout of EDS-405
 Panel Layout of EDS-405-MM /SS-SC
 Panel Layout of EDS-405-MM-ST

EDS-405 User’s Manual

Overview

EDS-405 Series, the new generation of EtherDevice™ Switch, includes 4 models:
EDS-405, EDS-405-MM-SC, EDS-405-SS-SC, and EDS-405-MM-ST, referred
to collectively as EDS-405. EDS-405 is a 5-port Ethernet switch specially
designed for industrial automation and control systems. It comes with the
plug-n-play Moxa Turbo Ring, which is used to establish an Ethernet redundant
ring topology. Turbo Ring can begin transmitting automatically over a redundant
path in under 300 ms, increasing the reliability of your system.

The built-in relay output function helps you monitor each port’s link status, each
power input’s status, and the health of the Turbo Ring topology. This relay output
warning function enables your maintenance engineers to react promptly to
emergency situations.

Commercial Ethernet switches need 3 to 5 minutes to recover the connection
when you unplug your device from one port, and then plug it into another port
for field diagnosis. The Line-Swap Fast Recovery feature responds in less than 1
second, allowing you to complete your diagnosis in a much shorter time period.

EDS-405 has a wide operating temperature range of -40 to 75°C, and is designed
to withstand a high degree of vibration and shock. The rugged hardware design
makes EDS-405 perfect for ensuring that your Ethernet equipment can withstand
critical industrial applications, such as in hazardous locations (UL/cUL Class 1
Division 2 and ATEX Class 1 Zone 2), and complies with FCC, TÜV, UL, and
CE Standards.

The redundant dual DC power inputs give you extra assurance that your switch
will operate non-stop, and the versatile installation options—by DIN-Rail or wall

mounting—makes it easy to fit EDS-405 into any environment.

1-2

Introduction

Package Checklist

Moxa EDS-405 is shipped with the following items:

Standar d Accessories

y 1 Switch: EDS-405, EDS-405-MM-SC, EDS-405-SS-SC, or

EDS-405-MM-ST

y EDS-405 User’s Manual
y Product Warranty Booklet
y Protective caps for unused ports

Optional Accessories

y WK-46 Wall Mounting Kit

NOTE: Notify your sales representative if any of the above items is missing or
damaged.

Product Features

EDS-405 has the following features:

y Plug-n-play, ring redundancy solution (recovery time < 300 ms)
y Relay output alarm for power failure, port break, or Turbo Ring break.
y 10/100M, full/half-duplex, MDI/MDI-X auto-sensing for 100BaseT(X) po rt
y Redundant dual DC power inputs
y Line-Swap Fast Recovery (patent pending)
y DIN-Rail or optional wall mounting
y Operating temperature ranges from 0 to 60°C, or extended operating

temperature from -40 to 75°C for “-T” models

1-3

EDS-405 User’s Manual

Panel Layout of EDS-405

Top View

1

2

4

Front View

12

11

Rear View

V2+

PWR2

V2-

FAULT

V1+

PWR1

V1-

V1 V2 INPUTS
12-48 VDC

12345 6

ON DIP

P1
P2

PORT

P3

ALARM
P4
P5

RING
P5

MASTER

ONOFF

5

4

3

1

EDS-405

2

3

5

PWR1

6

PWR2

FAULT

7
8

RING

MASTER

100M

9

2

10M

10

1

1. Grounding screw

2. Terminal block for power input
PWR1/PWR2 and relay output

3. Heat dissipation orifices

4. Dip switches

5. Power input PWR1 LED

6. Power input PWR2 LED

7. Fault LED

8. Ring Master LED

9. TP port’s 100 Mbps LED

10. TP port’s 10 Mbps LED

11. Model Name

12. 10/100BaseT(X) Port

13. Screw hole for optional wall mounting kit

14. DIN-Rail kit

1-4

13

14

13

Panel Layout of EDS-405-MM/SS-SC

Top View

1

2

4

Front View

12

12

11

Rear View

14

V2+

V2-

V1+
V1-

V1 V2 INPUTS
12-48 VDC

P1
P2
P3
P4
P5
P5

5

4

3

1

2

12345 6

ON DIP

ONOFF

EDS-405-MM-SC

PWR2

FAULT

PWR1

3

PORT
ALARM

RING
MASTER

5

PWR1

6

PWR2

FAULT

7

100M

8

RING

MASTER

13

100M

100M

9

2

10M

10

1

NOTE: The appearance of
EDS-405-SS-SC is identical to
EDS-405-MM-SC.

1. Grounding screw

2. Terminal block for power input

PWR1/PWR2 and relay output

3. Heat dissipation orifices

4. Dip switches

5. Power input PWR1 LED

6. Power input PWR2 LED

7. Fault LED

8. Ring Master LED

9. TP port’s 100 Mbps LED

10. TP port’s 10 Mbps LED

11. Model Name

12. 100BaseFX Port (Single/Multi Mode)

13. FX port’s 100 Mbps LED

14. Screw hole for optional wall mounting kit

15. DIN-Rail kit

Introduction

15

14

1-5

EDS-405 User’s Manual

Panel Layout of EDS-405-MM-ST

Top View

1

2

4

Front View

12

12

11

Rear View

V2+

V2-

V1+
V1-

V1 V2 INPUTS
12-48 VDC

P1
P2
P3
P4
P5
P5

5

4

3

1

2

12345 6

ON DIP

ONOFF

EDS-405-MM-ST

PWR2

FAULT

PWR1

3

PORT
ALARM

RING
MASTER

5

PWR1

6

PWR2

FAULT

7

100M

8

RING

MASTER

13

100M

100M

9

2

10M

10

1

1. Grounding screw

2. Terminal block for power input

PWR1/PWR2 and relay output

3. Heat dissipation orifices

4. Dip switches

5. Power input PWR1 LED

6. Power input PWR2 LED

7. Fault LED

8. Ring Master LED

9. TP port’s 100 Mbps LED

10. TP port’s 10 Mbps LED

11. Model Name

12. 100BaseFX Port (Multi Mode)

13. FX port’s 100 Mbps LED

14. Screw hole for optional wall mounting kit

15. DIN-Rail kit

1-6

14

15

14

2

2

Chapter 2Installing EDS-405

This chapter includes information about how to install EDS-405. The following
topics are covered:

 Mounting Dimensions
 DIN-Rail Mounting
 Wall Mounting (Optional)