Moxa Technologies EtherDevice EDS-305, EDS-309 Hardware Installation Manual
Moxa EtherDevice Switch
EDS-305
Hardware Installation Guide
Eighth Edition, September 2010
© 2010 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.
Fl.4, No.135, Lane 235, Pao-Chiao Rd. Shing Tien City, Taipei, Taiwan,
R.O.C.
TEL: +886-2-8919-1230
P/N: 1802003050030
- 2 -
Overview
Moxa’s EtherDevice™ EDS-305 are smart Ethernet switches that provide an
economical solution for your Ethernet connections. As an added bonus, the
built-in smart alarm function helps system maintainers monitor the health of
your Ethernet network.
The EDS-305 have a wide operating temperature range of -40 to 75ºC, and are
designed to withstand a high degree of vibration and shock. The rugged
hardware design makes either model perfect for ensuring that your Ethernet
equipment can withstand critical industrial applications, and complies with
FCC and CE Standards.
NOTE
Throughout this Hardware Installation Guide, we use EDS as an
abbreviation for Moxa EtherDevice Switch:
EDS = Moxa EtherDevice Switch
Package Checklist
Your EDS is shipped with the following items. If any of these items is missing
or damaged, please contact your customer service representative for assistance.
y Moxa EtherDevice™ Switch
y Hardware Installation Guide
y Moxa Product Warranty booklet
y Protective caps for unused ports
Features
High Performance Network Switching Technology
y 10/100BaseT(X) (RJ45), 100BaseFX (SC/ST-type, Multi/Single mode)
y IEEE802.3/802.3u/802.3x
y Store and Forward switching process type, with 1024 address entries
y 10/100M, Full/Half-Duplex, MDI/MDIX auto-sensing
Industrial Grade Reliablity
y Power failure, port break alarm by relay output
y Redundant dual DC power inputs
Rugged Design
y Operating temperature range from 0 to 60ºC, or extended operating
temperature from -40 to 75ºC for “-T” models
y IP30, rugged high-strength case
y DIN-rail or panel mounting ability
WARNING
The power for this product is intended to be supplied by a Listed
Power Supply, with output marked LPS, and rated to deliver 12 to
48 VDC at a maximum of 0.6A.
The DC jack should be used with an LPS unit that is rated to
deliver 12 to 48 VDC at a minimum of 1.1A. The product should
not be disassembled by operators or service people.
- 3 -
Panel Layout
EDS-305
Front Panel View
5
6
7
8
9
10
11
2
V1 V2 INPUTS: 24 VDC
PWR2
V2+
V2-
V1-
V1+
12345
ON DIP
PORT ALARM
FAULT
PWR1
Top Panel View
1
2
3
4
1
Rear Panel View
2
13
12
12
1. Grounding screw
2. Terminal block for power inputs
PWR1/PWR2 and relay output
3. Heat dissipation orifices
4. DIP switches
5. Power input PWR1 LED
6. Power input PWR2 LED
7. Fault LED
8. 10/100BaseT(X) Port
9. TP port’s 100 Mbps LED
10. TP port’s 10 Mbps LED
11. Model Name
12. Screw holes for wall mounting
kit
13. DIN-rail Kit
- 4 -
Panel Layout (SC-ty pe )
V1 V2 INPUTS: 24 VDC
PWR2
V2+
V2-
V1-
V1+
12345
ON DIP
PORT ALARM
FAULT
PWR1
Top Panel View
1
2
3
4
1
Rear Panel View
2
15
14
14
EDS-305-M-SC
Front Panel View
12
13
5
6
7
9
10
11
2
8
NOTE: The appearance of
EDS-305-S-SC is identical to
EDS-305-M-SC
1. Grounding screw
2. Terminal block for power inputs
PWR1/PWR2 and relay output
3. Heat dissipation orifices
4. DIP switches
5. Power input PWR1 LED
6. Power input PWR2 LED
7. Fault LED
8. 10/100BaseT(X) Port
9. TP port’s 100 Mbps LED
10. TP port’s 10 Mbps LED
11. Model Name
12. 100BaseFX Port
13. FX port’s 100 Mbps LED
14. Screw holes for wall mounting
kit
15. DIN-rail Kit
- 5 -
Panel Layout (ST-type )
V1 V2 INPUTS: 24 VDC
PWR2
V2+
V2-
V1-
V1+
12345
ON DIP
PORT ALARM
FAULT
PWR1
Top Panel View
1
2
3
4
1
Rear Panel View
2
15
14
14
EDS-305-M-ST
Front Panel View
12
13
5
6
7
9
10
11
2
8
1. Grounding screw
2. Terminal block for power
input PWR1/PWR2 and relay
output
3. Heat dissipation orifices
4. DIP switches
5. Power input PWR1 LED
6. Power input PWR2 LED
7. Fault LED
8. 10/100BaseT(X) Port
9. TP port’s 100 Mbps LED
10. TP port’s 10 Mbps LED
11. Model Name
12. 100BaseFX Port
13. 100 Mbps LED for FX port
14. Screw hole for wall mounting
kit
15. DIN-rail Kit
16. 100 Mbps LED for FX port 7
17. 100 Mbps LED for FX port 8
18. 100 Mbps LED for FX port 9
Loading...